Subject Areas : journal of New Materials

محسن سعیدی خانی ¹ , مهدی جاویدی ² , علی یزدانی ³ , ساره وفاخواه ⁴

1 - دانشجوی کارشناسی ارشد مهندسی و علم مواد، دانشگاه شیراز
2 - - استادیار بخش مهندسی و علم مواد، دانشگاه شیراز
3 - مربی گروه مهندسی و علم مواد، دانشگاه صنعتی مالک اشتر، شیراز.
4 - دانشجوی کارشناسی ارشد مهندسی و علم مواد، دانشگاه شیراز.

Received: 2015-12-29 Accepted : 2015-12-29 Published : 2012-06-21

Keywords:

References:

1- جی. وبر، تی. بیستک، "پوششهای تبدیلی شیمیایی والکترولیتی"، ص 247-322، ترجمه ع. افشار، انتشارات علمیدانشگاه صنعتی شریف، تهران، 1379.

2- Y. Huang, H. Shih, H. Huang, J. Daugherty,S. Wu, S. Ramanathan, C. Chang, F. Mansfeld,

"Evaluation of the Corrosion Resistance ofAnodized Aluminum 6061 using

Electrochemical Impedance Spectroscopy(EIS)", Corrosion Science, Vol. 50, pp. 3369-

3575, 2008.

3- G. E. Thompson, L. Zhang, C. J. E. Smith,P. Skeldon, “Boric Sulfuric Acid Anodizing of

Aluminum Alloys 2024 and 7075: FilmGrowth and Corrosion Resistance”, Corrosion

Science, Section 55, p. 11, 1999.

4- V. Moutarlier, M. P. Gigandet, J. Pagetti,"Characterisation of Pitting Corrosion in

Sealed Anodic Films Formed in Sulphuric,Sulphuric/Molybdate and Chromic Media",

Applied Surface Science, Vol. 206, pp. 237-249, 2003.

5- L. E. Fratila-Apachintei, F. D. Tichelaar, G.E. Thompson, H. Terryn, P. Skeldon, J.

Duszczyk, “A Transmission ElectronMicroscopy Study of Hard Anodic Oxide

Layers on AlSi(Cu) Alloys”, ElectrochimicaActa, Vol. 49, pp. 3169-3177, 2004.

6- A. Jagminas, D. Bigeliend, I. Mikulskas,“Growth Peculiarities of Aluminum Anodic

Oxide at High Voltages in Diluted PhosphoricAcid”, Journal of Crystal Growth, Vol. 233,pp. 591-598, 2001.

7- H. H. Shih, S. L. Tzou, “Study of AnodicOxidation of Aluminum in Mixed Acid using a

Pulsed Current”, Surface and CoatingTechnology, Vol. 124, pp. 278-285, 2000.

8- T. Takenaka, H. Habazaki, H. Konno,“Formation of Black Anodic Films on

Aluminum in Acid Electrolytes ContainingTitanium Complex Anion”, Surface andCoating Technology, Vol. 169/170, pp. 155-159, 2003.

9- J. S. Zhang, X. H. Zhao, Y. Zuo, J. P.Xiong, “The Bonding Strength and CorrosionResistance of Aluminum Alloy by AnodizingTreatment in a Phosphoric Acid Modified

Boric Acid/Sulfuric Acid Bath”, Surface andCoating Technology, Vol. 202, pp. 3149-3156,

2008.

10- V. Moutarlier, S. Pelletier, F. Lallemand,M. P. Gigandet, Z. Mekhalif ,

“Characterisation of the Anodic Layers formedon 2024 Aluminum Alloy, in TetraborateElectrolyte Containing Molybdate Ions”,Applied Surface Science, Vol. 252, pp. 1739-1746, 2005.

11- L. Song-mei, Z. Hong-rui, L. Jian-hua,“Corrosion Behavior of Aluminum Alloy

2024-T3 by 8-hydroxy-quinoline and itsDerivative in 3.5% Chloride Solution“,

Transactions of Nonferrous Metals Society ofChina, Vol. 17, pp. 318-325, 2007.

12- E. Ghali, “Corrosion Resistance ofAluminum and Magnesium Alloys”, Wiley,New Jersey, p. 137, 2010.

13- J. Ren, Y. Zuo, “Study of ElectrochemicalBehavior and Morphology of Pitting onAnodized 2024 Aluminum Alloy”, Surface andCoating Technology, Vol. 182, pp. 237-241,2004.

14- V. Moutarlier, M.P. Gigandet, B.Normand, J. Pagetti, “EIS characterisation ofanodic films formed on 2024 aluminium alloy,in sulphuric acid containing molybdate orpermanganate species”, Corrosion Science,Vol. 47, pp. 937-951, 2004

15- م. احتشام زاده، "مقدمه ای بر کاربرد طیف نگاریامپدانس الکتروشیمیایی (E.I.S) در مطالعه خوردگی"، ص.83، انتشارات دانشگاه شهید باهنر کرمان، کرمان، 1385.

16- J. J. Suay, E. Gimenez, T. Rodriguez, K.Habbib, J. J. Saura, “Characterization of

Anodized and Sealed Aluminum by EIS”,Corrosion Science, Vol. 45, pp. 611-624, 2003.

17- ASTM B 457, “Standard Test Method forMeasurement of Impedance of Anodic

Coatings on Aluminum”, ASTM Annual Bookof Standards, Vol. 192, Springer, 2003.

18- A. C. Crossland, H. Habazaki, K.Shumizu, P. Skeldon, G. E. Thompson, G. C.Wood, X. Zhou, C. J. E. Smith,“ResidualFlaws Due to Formation of Oxygen Bubbles in

Anodic Alumina”, Corrosion Science, Vol. 41,pp. 1945–1954, 1999.