Subject Areas : journal of New Materials

سید غلامرضا رضوی ¹ (کارشناس ارشد مهندسی مواد دانشگاه ازاد اسلامی واحد نجف آباد)
محسن سبکتکین ² (کارشناس ارشد مهندسی مواد دانشگاه ازاد اسلامی واحد نجف آباد)
حسین مناجاتی زاده ³ (استادیار گروه مهندسی مواد دانشگاه ازاد اسلامی واحد نجف آباد)
محمدرضا طرقی نژاد ⁴ (دانشیار گروه مهندسی مواد دانشگاه صنعتی اصفهان)

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2011-06-22

Keywords:

References:

1- R.E. Reed-Hill, R. Abbaschian, Physicalmetallurgy principles, PWS Co ,London, pp.

826-828, 1991.

2- P. Cugy, A. hildenbrand, M. Bouzekri, "ASuper high strength Fe-Mn-C austenitic steel

with excellent formability for automobileapplications", Arcelor Research SA, maizieres,

France, pp. 98-106, 2003.

 

4- B.X. Huang, X.D. Wang, Y.H. Rong, L.Wang, L. Jin, “Mechanical behavior and

martensitic transformation of an Fe–Mn–Si–Al–Nb alloy”, Materials Science and

Engineering A 438–440, pp. 306–311, 2006.

5- B.B. Rath, M.A. Imam, C.S. Pande,“Nucleation and growth of twin interfaces in

FCC metals and alloys”, Materials Physics andMechanic, Vol. 1, pp. 61-66, 2000.

6- Mi, Z., Tang, D., Yan, L., Guo, J., “Highstrength and high plasticity TWIP steel for

modern vehicle”, Mater. Sci. Technol., Vol.21, No. 4, pp. 451-454, 2005.

7- G.E. Totten, Steel Heat Treatment:Metallurgy and Technologies, 2ed CRC Press,

London,, pp. 2-9, 1996.

8- S. Vercammen, B. Blanpain, B. C. DeCooman, P. Wollants, “Cold rolling behaviour

of an austenitic Fe–30Mn–3Al–3Si TWIPsteel:theimportance of deformation twinning ”

Acta Materialia, Vol. 52(7), pp. 2005-2012,2004.

9- S. Mahajan, C.S. Pande, M.A. Imam, B.B.Rath, “Formation of annealing twins in f.c.c.

crystals”, Actamaterialia, Vol. 45, pp. 2633-

2638., 1997.

10- O. Grassel, L. Kruger, G. Frommeyer, L.W. Meyer, "High strength Fe-Mn-(Al,Si)

TRIP/TWIP steels development-propertiesapplication",International Journal of Plasticity,

Vol. 16, pp. 1391-1409, 2000.

11- George. E. Totten, Ph.D. Fasm, “SteelHeat treatment Handbook 2ed”, Taylor &

Francis, pp. 17-18, 2006.

12- I. Tamura, H. Sekine, T. Tanaka, C. ouchi,Thermomechanical processing of high-strength

Low-alloy steel, Butterworth & Co, pp. 32-58,1998.

13- H.O. pierson, Handbook of refractorycarbides and nitrides, NOYES Co, Newjersey,

pp. 100-112, 1996.