Subject Areas : journal of New Materials

احسان زنده باد ¹ (استادیار گروه مهندسی مواد دانشگاه آزاد اسلامی واحد علوم و تحقیقات فارس)
حبیب دانش‌منش ² (دانشیار گروه مهندسی مواد پردیس دانشکده های مهندسی دانشگاه شیراز)

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2011-06-22

Keywords:

References:

1- J. Banhart, "Manufacture, Characterizationand Application of Cellular Metals and Metal

Foams", Progress in Materials Science, Vol.46, pp. 559-632, 2001.

2- K. Kitazono, Y. Kikuchi, E. Sato and K.Kuribayashi, "Anisotropic Compressive

Behaviour of Al-Mg Alloy FoamsManufactured through Accumulative RollBonding

Process", Materials Letters, Vol.61, pp. 1771-1774, 2007.

3- E. Koza, M. Leonowicz, S. Wojciechowski,and F. Simancik, "Compressive Strength of

Aluminum Foams", Materials Letters, Vol. 58,pp.132-135, 2003.

4- O. B. Olurin, N. A. Fleck and M. F. Ashby,"Deformation and Fracture of Aluminum

Foams", Materials Science and Engineering,Vol. A291, pp. 136-146, 2000.

5- Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakaiand R.G. Hong, "Ultra-Fine Grained Bulk

Aluminum Produced by Accumulative RollBondingARB Process", Scripta Materialia,

Vol. 39, No. 9, pp. 1221-1227, 1998.

6- Y. Saito, H. Utsunomiya, N. Tsuji and T.Sakai, "Novel Ultra-High Straining Process for

Bulk Materials, Development of theAccumulative Roll-Bonding ARB Process",

Acta materialia, Vol. 47, No. 2, pp. 579-583,1999.

7- M. Alizadeh and M.H. Paydar, "Fabricationof Al/SiCP composite strips by repeated rollbonding

RRB process", Journal of Alloys andCompounds, Vol. 477, pp. 811–816 2009.

8- Ch. Lu, K. Tieu and D. Wexler, "Significantenhancement of bond strength in the

accumulative roll bonding process using nanosizedSiO2 particles", Journal of Materials

Processing Technology, Vol. 209, pp. 4830-4834, 2009.

9- K. Kitazono, E. Sato and K. Kuribayashi,"Novel Manufacturing of Closed-Cell

Aluminum Foam by Accumulative RollBonding",Scripta Materialia, Vol. 50, pp. 495-

498, 2004.

10- "ASM Specialty Handbook, Aluminumand Aluminum Alloys", Fourth Edition,

Chapter 3, pp. 290-328.

11- J. Banhart and J. Baumeister,"Deformation Characteristics of Metal Foams", 

Journal of Materials Science, Vol. 33, pp.1431-1440, 1998.

12- M. S. Aly, "Behavior of Closed CellAluminum Foams upon Compressive Testing

at Elevated Temperatures: ExperimentalResults", Materials Letters, Vol. 61, pp. 3138-

3141, 2007.

13- K. Y. G. McCullough, N. A. Fleck and M.F. Ashby, "Uniaxial Stress-Strain Behavior of

Aluminum Alloy Foams", Acta Materialia,Vol. 47, pp. 2323-2330, 1999.

14- E. P. Popov, "Mechanics of Materials",Prentice-Hall, INC., Englewood Cliffs, New

Jersey, USA, 2nd Eddition, p. 50, 1976.

15- A. Kim, M. A. Hasan, S. H. Nahm and, S.S. Cho, "Evaluation of Compressive

Mechanical Properties of Al-Foams UsingElectrical Conductivity", Composite

Structures, Vol. 71, pp. 191-198, 2005.