Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium

Subject Areas : journal of New Materials

مهدی Yousefzadeh ¹ (گروه فیزیک ،دانشگاه آزاداسلامی، واحدعلوم وتحقیقات آذربایجان شرقی، تبریز-ایران)
صمد Sobhanian ² (گروه فیزیک ، دانشگاه آزاداسلامی، واحدتبریز، تبریز-ایران)
حمید Naghshara ³ (گروه حالت جامد، دانشکده فیزیک،دانشگاه تبریز، تبریز-ایران)

Received: 2015-07-25 Accepted : 2017-06-17 Published : 2017-05-22

Keywords: Plasma, Plasma spray, Plasma torch coating, deposition, Oxygen plasma, Nitrogen plasma, Deposition of Alumina, Deposition of Aluminum,

Abstract :

Nowadays plasma has found wide industrial applications. One of these applications is layer deposition for surface modification and creating special physico- chemical and mechanical properties for the deposited layer. In this research work, a plasma torch is designed and manufactured for deposition of some non-metallic and metallic oxides on refractory stainless steel substrate via plasma spraying. (X-Ray Diffract meter)XRD  results confirm the formation of designed layers. Scanning Electron Microscope (SEM) also illustrates the formation of different Macromolecules (Nano-sized) on the surfaces of the samples. Alloy Coating is widely used to prevent the surface material destructions at high temperatures .One can use Plasma Torches to deposit refractory oxide like (Al2O3, SiO2, TiO2, and ZrO2) which have high melting points and it is not possible to melt and spray them with conversional methods.        

References:

1-J. ReeceRoth, Industrial Plasma Engineering-IOP.Publishing,London, 2001.

 

2- P. Fauchais..; “Understanding Plasma Spraying”; J Phys D: Appl Phys; 37:R86-R108, 2004.

 

3- C.E Mancini.,C.C Berndt,L. Sun,A. Kucuk; “Porosity determinations in thermally sprayed hydroxyapatite coatings”; J. Mat. Sci.; 36: 3891-96,2001.                                        

.

4- L. Sun.,C.C Berndt.,C.P. Grey.; “Phase, structural and microstructural investigations of plasma sprayed hydroxyapatite coatings”; Materials Science and Engineering: A360: 70-84, 2003.

 

5- F. Nadeau,L. Pouliot andJ. Blain  Thermal Spray: Surface Engineering via Applied Research ed C C Berndt (Ohio, USA: ASM International Materials Park) pp. 1131–7, 2000.

 

6- T. Haure, ADenoirjean, P.Tristant, H.Hidalgo, S.Koram andP.  Fauchais 2004 Alumina splat on alumina substrate Proc. ITSC (Osaka, Japan,) at press, 2004.

 

 

7-  Sobhanian S.,Low Temperature Plasma Sources, Workshop On low Temperrature Plasma And Their Applicatins,Tabriz university.

 

8- Farancies,F.chen.1994.Industrial Applaication of Low Temperature Plasma Physics.Part A.Unive.california.

 

9- Pfender,E., Fincke,J.R. and R. Spores, "Entrainment of Cold Gas into thermal PlasmaJets," Plasma Chem. Plasma Process. 11, 529-543,1991.

 

10- Mauer,G., Vasen,R., Stover ,D., "Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity" , Surface & Coatings Technology 204, 172–179,2009.

 

11- Leal-Quiros,Ed bertho,Plasma Processing of Municipal Solid Waste,Brazilian Journal of Physics34(2004)

 

12- Rointan,F.Bunshah.2001.Handbook of preposition Technologies for Film and Coating.

 

13- Smagorinski,   M.E.,   and   Tsanrizos,   P.G., “Production   of   Spherical   Titanium   Powder   by   PlasmaAtomization”, Proceedings of PM2TEC Conference, Orlando, USA, p.3-248 – 3-260, 2002.

 

14- Indian Journal of Engineering & Materials Sciences Vol.17,June2010,pp199-207.