Numerical simulations of different bearings to obtain the surface tension through the finite element method
Subject Areas : International Journal of Mathematical Modelling & ComputationsBehrouz Bohlouli 1 , Sattar Jedari Salami 2
1 -
2 -
Keywords: Bearing, Finite element method, Theoretical concepts, Surface tension, Contact pressure ,
Abstract :
Higher-performance tapered roller bearings are required to increase freight vehicle loads. More development is needed for the modeling tools and techniques utilized for subsurface contact stress evaluations, as the stress condition on railway bearing applications is rising. Railway-bearing contact geometries and heat treatment standards were first created under ideal load circumstances. Nonetheless, tapered roller bearings are subjected to various load conditions which are rarely ideal in railroad applications. Furthermore, there are frequent variations in bearing loads, railcar wear conditions, maintenance procedures, and reliability vs utilization expectations when comparing global rail markets. In the current research paper, the bearing with different special shapes is modeled using the finite element method under loading conditions. Also, the obtained results are compared to those obtained theoretically. The results reveal that the finite element modeling can predict the theoretical observations and finally, it can be concluded that the shapes of the bearings influence the stress distributions in the systems.
[1] Z. Liu, Y. Wang, L. Cai, Y. Zhao, Q. Cheng, and X. Dong, “A review of hydrostatic bearing system: Researches and applications,” Adv. Mech. Eng., vol. 9, no. 10, Oct. 2017, doi: 10.1177/1687814017730536/ASSET/IMAGES/LARGE/10.1177_1687814017730536-FIG20.JPEG.
[2] A. Gunduz, J. T. Dreyer, and R. Singh, “Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly: Experiments on double row angular contact ball bearings,” Mech. Syst. Signal Process., vol. 31, pp. 176–195, Aug. 2012, doi: 10.1016/J.YMSSP.2012.03.013.
[3] C. Chaudhari, B. Thakare, S. Patil, and S. U. Gunjal, “A STUDY OF BEARING AND ITS TYPES,” 2015.
[4] G. G. Meyerhof, “Some Recent Research on the Bearing Capacity of Foundations,” https://doi.org/10.1139/t63-003, vol. 1, no. 1, pp. 16–26, Sep. 2011, doi: 10.1139/T63-003.
[5] R. K. Upadhyay, L. A. Kumaraswamidhas, and M. S. Azam, “Rolling element bearing failure analysis: A case study,” Case Stud. Eng. Fail. Anal., vol. 1, no. 1, pp. 15–17, Jan. 2013, doi: 10.1016/J.CSEFA.2012.11.003.
[6] E. L. Salih, L. Gardner, and D. A. Nethercot, “Bearing failure in stainless steel bolted connections,” Eng. Struct., vol. 33, no. 2, pp. 549–562, Feb. 2011, doi: 10.1016/J.ENGSTRUCT.2010.11.013.
[7] M. A. Molina and R. Gohar, “Hydrodynamic Lubrication of Ball-Bearing Cage Pockets,” http://dx.doi.org/10.1243/JMES_JOUR_1978_020_004_02, vol. 20, no. 1, pp. 11–20, Feb. 1978, doi: 10.1243/JMES_JOUR_1978_020_004_02.
[8] C. R. Gentle and M. Pasdari, “Measurement of Cage and Pocket Friction in a Ball Bearing for Use in a Simulation Program,” ASLE Trans., vol. 28, no. 4, pp. 536–541, 1985, doi: 10.1080/05698198508981652.
[9] C. R. Gentle and R. J. Boness, “Prediction of Ball Motion in High-Speed Thrust-Loaded Ball Bearings,” J. Lubr. Technol., vol. 98, no. 3, pp. 463–469, Jul. 1976, doi: 10.1115/1.3452889.
[10] S. Jiang, X. Chen, J. Gu, and X. Shen, “Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion,” Chinese J. Aeronaut., vol. 27, no. 5, pp. 1301–1311, Oct. 2014, doi: 10.1016/J.CJA.2014.08.005.
[11] H. Ohta and M. Kanatsu, “Running Torque of Ball Bearings with Polymer Lubricant (Effect of the Enclosure Form of Polymer Lubricant),” Tribol. Trans., vol. 48, no. 4, pp. 484–491, Oct. 2005, doi: 10.1080/05698190500313478.
[12] C. Brecher, A. Hassis, and J. Rossaint, “Cage Friction in High-Speed Spindle Bearings,” Tribol. Trans., vol. 57, no. 1, pp. 77–85, 2014, doi: 10.1080/10402004.2013.843738.
[13] H. Girish and R. Pai, “Theoretical investigation of the effect of offset loads on the static characteristics of a multi-pad adjustable bearing geometry,” Aust. J. Mech. Eng., vol. 20, no. 3, pp. 866–874, May 2022, doi: 10.1080/14484846.2020.1760435.
[14] B. Damiens, A. A. Lubrecht, and P. M. Cann, “Influence of Cage Clearance on Bearing Lubrication©,” Tribol. Trans., vol. 47, no. 1, pp. 2–6, 2004, doi: 10.1080/05698190490279128.
[15] D. Yousheng, Z. Keqin, L. Wenjie, Y. Zhigang, and Z. Huiling, “Bearing performance of diaphragm wall pile combination foundation under vertical and horizontal loads,” J. Eng. Res., Sep. 2023, doi: 10.1016/J.JER.2023.09.003.
[16] H. Molatefi, S. Najafian, and H. Mozafari, “Fracture mechanics of planetary gear set by using extended finite element method-linear elastic fracture mechanics approach,” Aust. J. Mech. Eng., vol. 13, no. 2, pp. 87–96, Jan. 2015, doi: 10.7158/M13-077.2015.13.2.
[17] A. Belhocine and A. Afzal, “Computational finite element analysis of brake disc rotors employing different materials,” Aust. J. Mech. Eng., vol. 20, no. 3, pp. 637–650, May 2022, doi: 10.1080/14484846.2020.1733175.
[18] S. H. Gawande, K. Balashowry, K. A. Raykar, and K. H. Munde, “Estimation of contact stresses in EN31 rolling contact bearings for screw compressor using Gauss quadrature & statistical analysis,” Aust. J. Mech. Eng., Apr. 2023, doi: 10.1080/14484846.2023.2195098.
[19] M. A. Gharaibeh, H. Tlilan, and B. M. Y. Gharaibeh, “Stress concentration factor analysis of countersunk holes using finite element analysis and response surface methodology,” Aust. J. Mech. Eng., vol. 19, no. 1, pp. 30–38, Jan. 2021, doi: 10.1080/14484846.2019.1565069.
[20] R. Gou, X. Zhang, W. Yang, and X. Chang, “Finite element analysis of surface indentation on turbo-drill thrust ball bearing,” Aust. J. Mech. Eng., vol. 18, no. 3, pp. 385–394, Sep. 2020, doi: 10.1080/14484846.2018.1531811.
