Application of Nanoscience in Self-cleaning Properties of Concrete Facade for Development of Sustainable Environment

Subject Areas :

Sayedeh Fatemeh  Khoshkalam Soleimandarabi ¹ (Department of Architecture Engineering, Nour Branch, Islamic Azad University, Nour, Iran)
Raheleh  rostami ² (Department of Architecture Engineering, Sari Branch, Islamic Azad University, Sari, Iran)
Mehdi  Nezhadnaderi ³ (Department of Civil Engineering, Tonekabon Branch, Islamic Azad University.)

Received: 2020-02-10 Accepted : 2020-02-29 Published : 2020-03-01

Keywords:

References:

Aly M, Hashmi M.S.J, Olabi A.G, Messeiry M, Abadir EF, Hussain AI, 2012, Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar, Mater. Des. 33: 127–135. Doi: 10.1016/j.matdes.2011.07.008.

ASTM C150-07, (2007) Standard Specification for Portland Cement, ASTM International, West Conshohocken, Pennsylvania, USA.

ASTM C494-08, 2008, Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, Pennsylvania, USA.

ASTM C109-08, 2008, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, Pennsylvania, USA.

ASTM C642-06, 2008, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, Pennsylvania, USA.

ASTM C642-13, 2013, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, PA.

ASTM C497-19,(2019, Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile, ASTM International, West Conshohocken, PA.

BS EN 1340, 2003, Concrete kerb units. Requirements and test methods.

Chen J, Poon CS. 2009, Photocatalytic construction and building materials: from fundamentals to applications. Build Environ. 44(9): 1899–1906. Doi:10.1016/j.buildenv.2009.01.002.

Crupi V, Faio B, Gessini A, Kis Z, La Russa M.F, Majolino D, Masciovecchio C, Ricca M, Rossi B, Ruffolo S.A, Venuti V. 2018, TiO2- SiO2- PDMS nanocomposite coating with self- cleaning effect for stone material: Finding the optimal amount of TiO2. Construction and Building Materials. 166: 464-471. Doi:10.1016/j.conbuildmat.2018.01.172.

Dalvand A, Sharbatdar M.K, Kheyroddin A, Nikui A. 2014, Assessment of statistical variations in experimental impact resistance and mechanical properties of silica fume concrete, J. Sci. Iran. Trans. A: Civ. Eng. 21: 1577–1590.

Du H, Du S, Liu X. 2014, Durability performances of concrete with nano-silica, Constr. Build. Mater. 73: 705–712.

Gesoglu M, Guneyisi E, Sabah Asaad, D, Muhyaddin, GF, 2016, Properties of low binder ultra-high performance cementitious composites: Comparison of nanosilica and microsilica, Construction and Building Materials, 102: 706-713.

ISIRI, No. 8906, 2007, Standard water and wastewater pipelines of Iran. 1st.edition: 34-35.

Jayapalan AR, Kurtis KE. 2009, Effect of nano-sized titanium dioxide on early age hydration of Portland cement In: Bittnar Z, Bartos PJM, Nemecek J, Smilauer V, Zeman J, editors", Nanotechnology in construction: proceedings of the NICOM3 (3rd international symposium on nanotechnology in construction). Prague, Czech Republic. 267–273.

Lackhoff M, Prieto X, Nestle N, Dehn F, Niessner R. 2003, Photocatalytic activity of semiconductor-modified cement–influence of semiconductor type and cement ageing. Appl Catal B Environ. 43(3): 205–216. Doi:10.1016/S0926-3373(02)00303-X.

Li H, Zhang M.H, Ou J.P, (2006) Abrasion resistance of concrete containing nanoparticles for pavement.  Wear, 260(11–12): 1262–1266.  Doi: 10.1016/j.wear.2005.08.006.

 Li H, Zhang M.H, Ou J.P, (2007) Flexural fatigue performance of concrete containing nano-particles for pavement. Int J Fatig. 29(7): 1292–1301. DOI: 10.1016/j.ijfatigue.2006.10.004.

 Mohammadi Aloucheh R.  Alaee Mollabashi, Y, Asadi A, Baris O, Gholamzadeh, S. 2018, The role of nanobiosensors in identifying pathogens and environmental hazards. Anthropogenic Pollution Journal, 2 (2): 10-17. Doi:10.22034/AP.2018.572812.1024.

Murata Y, Obara KT. 1999, Takeuchi. Air purifying pavement: development of photocatalytic concrete blocks. J Adv Oxidat Technol. 4(2): 227–230.

Senff L, Hotza D, Lucas S, Ferreira VM, Labrincha  JA. 2012, Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars. Materials Science and Engineering A, 532: 354-361. Doi:10.1016/j.msea.2011.10.102.

Taheri-Behrooz F, Memar Maher B, Shokrieh MM. 2015, Mechanical properties modification of a thin film phenolic resin filled with nano silica particles, Comput. Mater. Sci. 96: 411–415. DOI: 10.1016/j.commatsci.2014.08.042

Qing Z, Zenan Z, Deyu K and Rongshen C. 2007, Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume. Construct Build Mater, 21(3): 539–545. DOI: 10.1016/j.conbuildmat.2005.09.001.

Shannag MJ. 2000, High strength concrete containing natural pozzolan and silica fume, Cem. Concr. Compos. 22 (6): 399–406. DOI: 10.1016/S0958-9465(00)00037-8.

Yazici H. 2007, The effect of curing conditions on compressive strength of ultra-high strength concrete with high volume mineral admixtures, Build. Environ. 42 (5): 2083–2089. DOI: 10.1016/j.buildenv.2006.03.013. .