ابرمومسانی فولادهای زنگ نزن دو فازی r/a
Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering
امین
کلاه دوز
1
(استادیار، دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی، واحد خمینی شهر)
مهدی
دشتی
2
(کارشناس ارشد، دانشکده مهندسی مکانیک، دانشگاه صنعتی نوشیروانی بابل، مازندران، ایران.کارشناس ارشد، دانشکده مهندسی مکانیک، دانشگاه صنعتی نوشیروانی بابل، مازندران، ایران.)
Keywords: فولاد زنگ نزن دو فازی, سرخوردن مرز دانه ها, ابر مومسانی, فازα, فازr,
Abstract :
در این مقاله مطالعات انجام شده در خصوص ابرمومسانی فولادهای زنگ نزن دو فازی مورد بررسی قرار گرفته است. هدف بدست آوردن مناسب­ترین شرایط عملیات ترمومکانیکی جهت ریزکردن ساختار (اندازه دانه) و القای خاصیت ابرمومسانی در فولادهای زنگ نزن دو فازی است. همچنین نشان دادن محدوده مناسب دمایی و نرخ کرنش مورد استفاده در فرآیند ابرمومسانی این نوع فولادها جهت بدست آوردن حداکثر ازدیاد طول می باشد. نتایج نشان می­دهد که با استفاده از عملیات ترمومکانیکی شامل حل سازی، نورد و آنیل می­توان به اندازه دانه­هایی تا µm4-5/0 دست یافت. بیشترین ازدیاد طول در حدود 1000% در محدوده دمایی ˚C1000-800 و نرخ کرنش s-1 1/0-01/0 بدست می­آید. تحت این شرایط ضریب حساسیت به نرخ کرنش در حدود 6/0 می باشد
[1] Matsushita, M., Suko, T., Ohfuji, H., Ogiyama, H., Analysis Of The Texture Of Superplastic Carburized Duplex Stainless Alloy, Materials Chemistry and Physics, vol. 114, 2009, pp. 522-524.
[2] Matsushita, M., Ogiyama, H., Diffusion of Boron on superplastic duplex stainless Steel, Journal of Phase Equilibria And Diffusion, vol. 31, No.1, 2001, pp. 2-5.
[3] Junior, A.M.J., Reis, G.S., Balancin, O., Influence of the microstructure on the plastic behavior of duplex stainless steels, Materials Science and Engineering A, In Press, 2010, Accepted Manuscript.
[4] Jimenez, J.A., Frommeyer, G., Carsi, M., Ruano, O.A., Superplastic properties of A δ/g stainless steel, Materials Science And Engineering A, vol. 307, 2001, pp. 134-142.
[5] Han, Y.S., Hong, S.H., Microstructural Changes During Superplastic Deformation Of Fe-24Cr-7Ni-3Mo-0.14N Duplex Stainless Steel, Materials Science And Engineering A, vol. 266, 1998, pp. 276-284.
[6] Sagradi, M., Sagradi, D.P., Medrano, R.E., The Effect of The Microstructure on The Superplasticity of A Duplex Stainless Steel, Acta Materialia, vol. 46, No. 11, 1998, pp. 3857-3862.
[7] Kassner, M.E., Fundamentals of Creep In Metals And Alloys, Elsevier, 2009.
[8] Maehara, Y., Ohmori, Y., Microstructural Change during Superplastic Deformation of δ-Ferrite/Austenite Duplex Stainless Steel, Metallurgical Transactions A, vol. 18A, 1987, pp. 663-672.
[9] Osada, K., Uekoh, S., Ebato, K., Superplasticity Of As Rolled Duplex Stainless Steel, Transactions ISI J, vol. 27, 1987, pp. 713-718.
[10] Maehara, Y., High Strain Rate Superplasticity Of A 25 Wt Pct Cr-7 Wt Pct Ni-3 Wt Pct Mo-0.14 Wt Pct N Duplex Stainless Steel, Metallurgical Transactions A, vol. 22A, 1991, pp. 1083-1091.
[11] Patankar, S.N., Lim, C.T., Tan, M.J., Superplastic Forming Of Duplex Stainless Steel, Metallurgical And Materials Transactions A, vol. 31A, 2000, pp. 2394-2396.
[12] Pulino-Sagradi, D., Nazar, A.M.M., Ammann, J.J., Medrano, R.E., Effect of Temperature And Strain Rate On Cavitation In A Superplastic Duplex Stainless Steel, Acta Materialia, vol. 45, No. 11, 1997, pp. 4663-4666.
[13] Maki, T., Furuhara, T., Tsuzaki, K., Microstructure Development By Thermo-mechanical Processing In Duplex Stainless Steel, ISI J International, vol. 41, 2001, pp. 571-579.
[14] Miyamoto, H., Miamaki, T., Hashimoto, S., Superplastic Deformation of Micro-Specimens of Duplex Stainless Steel, Materials Science and Engineering A, vol. 319-321, 2001, pp. 779-783.
[15] Han, Y.S., Hong, S.H., Phenomena and Mechanism on Super-plasticity of Duplex Stainless Steels, Metals And Materials, vol. 6, No. 2, 2000, pp. 161-167.
[16] Maehara Y., Superplastic Deformation of Duplex Stainless Steel, United States Patent, 1987, pp. 4637841.