Lattice Boltzmann method for natural convection of nanofluid flow in a trapezoidal-shaped sinusoidal cavity by considering Brownian motion

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Nemat  Ebrahimi ¹ (Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran)
Hossein  Ahmadi Danesh Ashtiani ² (Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran)
Davood  Toghraie ³ (Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran, [e-mail])

Received: 2022-12-12 Accepted : 2022-12-31 Published : 2023-03-01

Keywords:

References:

 

[1]	Ashorynejad, H.R., Mohamad, A.A. and Sheikholeslami, M., 2013. Magnetic field effects on natural convection flow of a nanofluid in a horizontal cylindrical annulus using Lattice Boltzmann method. International Journal of Thermal Sciences, 64, pp.240-250.
[2]	Kahwaji, G., and Ali, O.M., "Numerical Investigation of Natural Convection Heat Transfer from Square Cylinder in an Enclosed Enclosure Filled with Nanofluids", International Journal of Recent Advances in Mechanical Engineering (IJMECH), Vol. 4, No. 4, pp. 1-17, (2015).
[3]	Sheikholeslami, M., Gorji-Bandpy, M., and Ganji, D., "Lattice Boltzmann Method for MHD Natural Convection Heat Transfer using Nanofluid", Powder Technology, Vol. 254, pp. 82-93, (2014).
[4]	Choi, S.U.S., "Enhancing Thermal Conductivity of Fluids with Nanoparticles", ASME Fluids Engineering Division, Vol. 231, pp. 99-106, (1995).
[5]	Heris, S.Z., Esfahany, M.N. and Etemad, S.G., 2007. Experimental investigation of convective heat transfer of Al2O3/water nanofluid in circular tube. International journal of heat and fluid flow, 28(2), pp.203-210.
[6]	Zarringhalam, M., Karimipour, A. and Toghraie, D., 2016. Experimental study of the effect of solid volume fraction and Reynolds number on heat transfer coefficient and pressure drop of CuO–water nanofluid. Experimental Thermal and Fluid Science, 76, pp.342-351.
[7]	Esfe, M.H., Saedodin, S., Mahian, O. and Wongwises, S., 2014. Efficiency of ferromagnetic nanoparticles suspended in ethylene glycol for applications in energy devices: effects of particle size, temperature, and concentration. International Communications in Heat and Mass Transfer, 58, pp.138-146.
[8]	Kefayati, G.R., Gorji-Bandpy, M., Sajjadi, H. and Ganji, D.D., 2012. Lattice Boltzmann simulation of MHD mixed convection in a lid-driven square cavity with linearly heated wall. Scientia Iranica, 19(4), pp.1053-1065.
[9]	Nemati, H., Farhadi, M., Sedighi, K., Fattahi, E. and Darzi, A.A.R., 2010. Lattice Boltzmann simulation of nanofluid in lid-driven cavity. International Communications in Heat and Mass Transfer, 37(10), pp.1528-1534.
[10]	Hasib, M.H., Hossen, M.S. and Saha, S., 2015. Effect of tilt angle on pure mixed convection flow in trapezoidal cavities filled with water-Al2O3 nanofluid. Procedia Engineering, 105(1), pp.388-397.
[11]	Ma, Y., Mohebbi, R., Rashidi, M.M., Yang, Z. and Sheremet, M., 2020. Nanoliquid thermal convection in I-shaped multiple-pipe heat exchanger under magnetic field influence. Physica A: Statistical Mechanics and its Applications, 550, p.124028.
[12]	Sheikholeslami, M., Gorji-Bandpy, M., and Ganji, D., "Lattice Boltzmann Method for MHD Natural Convection Heat Transfer using Nanofluid", Powder Technology, Vol. 254, pp. 82-93, (2014).
[13]	Mliki, B., Abbassi, M.A., Guedri, K., and Omri, A., "Lattice Boltzmann Simulation of Natural Convection in an L-Shaped Enclosure in the Presence of Nanofluid", Engineering Science and Technology, an International Journal, Vol. 18, pp. 503-511, (2015).
[14]	Jafari, M., Farhadi, M., Akbarzade, S., and Ebrahimi, M., "Lattice Boltzmann Simulation of Natural Convection Heat Transfer of SWCNT-Nanofluid in an Open Enclosure", Ain Shams Engineering Journal, Vol. 6, pp. 913-927, (2015).
[15]	Chamkha, A.J., and Ismael, M.A., "Magnetic Field Effect on Mixed Convection in Liddriven Trapezoidal Cavities Filled with a Cu–water Nanofluid with an Aiding or Opposing Side Wall", Journal of Thermal Science and Engineering Applications, Vol. 8, pp. 310-319, (2016).
[16]	Mahmoudi, A., Mejri, I., Abbassi, M.A., and Omri, A., "Lattice Boltzmann Simulation of MHD Natural Convection in a Nanofluid-filled Cavity with Linear Temperature Distribution", Powder Technology, Vol. 256, pp. 257-271, (2014).
[17]	Kefayati, G.R., Gorji-Bandpy, M., Sajjadi, H. and Ganji, D.D., 2012. Lattice Boltzmann simulation of MHD mixed convection in a lid-driven square cavity with linearly heated wall. Scientia Iranica, 19(4), pp.1053-1065.
[18]	Ma, Y., Rashidi, M.M., Mohebbi, R. and Yang, Z., 2020. Nanofluid natural convection in a corrugated solar power plant using the hybrid LBM-TVD method. Energy, 199, p.117402.
[19]	Mehryan, S.A.M., Izadpanahi, E., Ghalambaz, M. and Chamkha, A.J., 2019. Mixed convection flow caused by an oscillating cylinder in a square cavity filled with Cu–Al2O3/water hybrid nanofluid. Journal of Thermal Analysis and Calorimetry, 137(3), pp.965-982.
[20]	Bellout, S. and Bessaïh, R., 2021. Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid. Journal of Applied and Computational Mechanics, 7(3), pp.1501-1513.
[21]	Mehryan, S.A.M., Ghalambaz, M., Chamkha, A.J. and Izadi, M., 2020. Numerical study on natural convection of Ag–MgO hybrid/water nanofluid inside a porous enclosure: A local thermal non-equilibrium model. Powder Technology, 367, pp.443-455.
[22]	Mehryan, S.A.M., Ghalambaz, M., Gargari, L.S., Hajjar, A. and Sheremet, M., 2020. Natural convection flow of a suspension containing nano-encapsulated phase change particles in an eccentric annulus. Journal of Energy Storage, 28, p.101236.
[23]	Rahman, A., Redwan, D.A., Thohura, S., Kamrujjaman, M. and Molla, M.M., Natural convection and entropy generation of non-Newtonian nanofluids with different angles of external magnetic field using GPU accelerated MRT-LBM. Case Studies in Thermal Engineering, p.101769, 2022.
[24]	Rahimi, A., Kasaeipoor, A., Malekshah, E.H. and Amiri, A., 2018. Natural convection analysis employing entropy generation and heatline visualization in a hollow L-shaped cavity filled with nanofluid using lattice Boltzmann method-experimental thermo-physical properties. Physica E: Low-Dimensional Systems and Nanostructures, 97, pp.82-97.
[25]	Hussein, A.K., Lioua, K., Chand, R., Sivasankaran, S., Nikbakhti, R., Li, D., Naceur, B.M. and Habib, B.A., 2016. Three-dimensional unsteady natural convection and entropy generation in an inclined cubical trapezoidal cavity with an isothermal bottom wall. Alexandria Engineering Journal, 55(2), pp.741-755.
[26]	Armaghani, T., Esmaeili, H., Mohammadpoor, Y.A. and Pop, I., 2018. MHD mixed convection flow and heat transfer in an open C-shaped enclosure using water-copper oxide nanofluid. Heat and Mass Transfer, 54(6), pp.1791-1801.
[27]	Zhang, X., Xu, Y., Zhang, J., Rahmani, A., Sajadi, S.M., Zarringhalam, M. and Toghraie, D., 2021. Numerical study of mixed convection of nanofluid inside an inlet/outlet inclined cavity under the effect of Brownian motion using Lattice Boltzmann Method (LBM). International Communications in Heat and Mass Transfer, 126, p.105428.