Effect of wind speed on the drag force and wall shear stress of domes in historical mosques of Iran: a case study

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Iman Pishkar ¹ , Mehdi Jahangiri ² , Rouhollah Yadollahi Farsani ³ , Ayoub Khosravi Farsani ⁴

1 - Department of Mechanical engineering, Payame Noor University (PNU),P.O.Box 19395-4697, Tehran, Iran
2 - Energy Research Center, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran.
3 - Energy Research Center, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran.
4 - Department of Mechanical Engineering, Faculty of Boroujen, Technical and Vocational University (TVU), Chaharmahal and Bakhtiari, Iran.

Received: 2023-01-27 Accepted : 2023-05-30 Published : 2023-06-01

Keywords:

References:

 

• Feizolahbeigi, A., Lourenço, P.B., Golabchi, M., Ortega, J., Rezazadeh, M. (2020). Discussion of the role of geometry, proportion and construction techniques in the seismic behavior of 16^th to 18^th century bulbous discontinuous double shell domes in central Iran. Journal of Building Engineering, 33: 101575.


• Bakhteari, S., Attarian, K. (2020). Geometry-based modeling for characterizing design and construction of Ourchin domes. Journal of Building Engineering, 29: 101199.


• (2020). Porticos, arches, domes and gardens, key elements of Persian architecture. https://www.tehrantimes.com/news/443707/Porticos-arches-domes-and-gardens-key-elements-of-Persian, accessed Jan. 3, 2020.


• Askari Chaverdi, A., Djamali, M. (2019). Sasanian Palaces of Persis According to the Absolute Chronology: Qal ‘a-ye Doxtar and Palace of Ardašīr I (Ātaškada) at Firūzābād, and the so-called Palace of Sarvestān, Iran. Archaeology Journal, 3(4): 23-32.


• Maroufi, H. (2020). Urban planning in ancient cities of Iran: understanding the meaning of urban form in the Sasanian city of Ardašīr-Xwarrah. Planning Perspectives, 35(6): 1055-1080.


• Vandaee, M., Tajbakhsh, R., Maghsoudi, R. (2013). Sassanid fire temple Discovered in Ardašīr Khore, Pars. Journal of American Science, 9: 105-114.


• Rezaeinia, A.A. (2018). Some Remarks on the Architectural Structure and Function of the Niasar Chahar Taq. Pazhoheshha-ye Bastan Shenasi Iran, 8(17): 141-160.


• Golombek, L., Wilber, D. (1988). The Timurid architecture of Iran & Turan. Princeton University Press, Princeton, New Jersey, United States.


• Gye, D.H. (1988). Arches and domes in Iranian Islamic Buildings: An engineer's perspective. Iran, 26(1): 129-144.


• Escrig, F. (1988). Towers & domes. WIT Press, Southampton SO40 7AA, UK.


• Grube, E.J., Dickie, J. (1995). Architecture of the Islamic world, its history & social meaning. George (EDT) Michell., William Morrow, NY.


• Ashkan, M., Ahmad, Y. (2010). Discontinuous double-shell domes through Islamic eras in the Middle East and central Asia: History, morphology, typologies, geometry, and construction. Nexus Network Journal, 12(2): 287-319.


• Ashkan, M., Ahmad, Y. (2012). Significance of conical and polyhedral domes in persia and surrounding areas: morphology, typologies and geometric characteristics. Nexus Network Journal, 14(2): 275-290.


• Yari, F., Silvayeh, S., Goodarzi, M., Amin, A., Hoorshenas, R. (2016). The Stability of Dome Structures in the Iranian Traditional Architecture, Case Study: Dome of Taj-al-Molk. Journal of Architectural Engineering Technology, 5(2):164.


• Shiri, T., Momeni, K. (2020). Investigation of the effects of sunlight on the surface of the domes of mosques in desert areas. The Journal of Geographical Research on Desert Areas, 8(1): 215-242.


• Behnamian, S., Behnamian, S., Fogh, F., Pashaei, F., Saran, M.M. (2020). Novelty architecture and mathematics in an Iranian mosque. Journal of Islamic Architecture, 6(1): 7-12.


• Danaeinia, A., Heydari Dehcheshmeh, M., Rahman, S. (2020). The Structural Solution of Light Suppling in Iranian Domeshouses. Iran University of Science & Technology, 30(1): 44-53.


• Faghih, A.K., Bahadori, M.N. (2009). Experimental investigation of air flow over domed roofs. Iranian Journal of Science and Technology Transaction B: Engineering, 33(3): 207–216.


• Cheng, C.M., Fu, C.L. (2010). Characteristic of wind loads on a hemispherical dome in smooth flow and turbulent boundary layer flow. Journal of Wind Engineering and Industrial Aerodynamics, 98(6-7): 328-344.


• Faghih, A.K., Bahadori, M.N. (2011). Thermal performance evaluation of domed roofs. Energy and Buildings, 43(6): 1254–1263.


• Abohela, I., Hamza, N., Dudek, S. (2013). Effect of roof shape on energy yield and positioning of roof mounting wind turbines. Renewable Energy, 50: 1106–1118.


• Sun, Y., Qiu, Y., Wu, Y. (2013). Modeling of wind pressure spectra on spherical domes. International Journal of Space Structures, 28(2): 87-99.


• Mahdavinejad, M., Javanroodi, K. (2014). Efficient roof shapes through wind flow and indoor temperature, case studies: Flat roofs and domed roofs. Armanshahr Architecture & Urban Development, 7(12): 55-68.


• Soleimani, Z., Calautit, J.K., Hughes, B.R. (2016). Computational analysis of natural ventilation flows in geodesic dome building in hot climates. Computation, 4(3): 31.


• Zhou, Y., Li, Y., Zhang, Y. and Yoshida, A., (2018). Characteristics of wind load on spatial structures with typical shapes due to aerodynamic geometrical parameters and terrain type. Advances in Civil Engineering, 2018: 9738038.


• Khosrowjerdi, S., Sarkardeh, H. and Kioumarsi, M., (2021). Effect of wind load on different heritage dome buildings. The European Physical Journal Plus, 136: 1-18.


• Khosrowjerdi, S. and Sarkardeh, H., (2022). Effect of wind load on combined arches in dome buildings. The European Physical Journal Plus, 137(2): 227.


• Nejati, A., Sadeghi, H. and Heristchian, M., (2023). Wind effect on scallop domes with negative amplitude and prominence using Experimental and Numerical Study. International Journal of Space Structures, 09560599231166897


• Farsani, R.Y., Mahmoudi, A., Jahangiri, M. (2020). How a conductive baffle improves melting characteristic and heat transfer in a rectangular cavity filled with gallium. Thermal Science and Engineering Progress, 16: 100453.


• Farsani, R.Y., Raeiszadeh, F., Jahangiri, M., Afrand, M. (2020). Melting characteristics of paraffin wax in a rectangular cavity under steady rotations. Journal of the Taiwan Institute of Chemical Engineers, 113: 135-141.


• Jahangiri, M., Saghafian, M., & Sadeghi, M. R. (2015). Numerical simulation of hemodynamic parameters of turbulent and pulsatile blood flow in flexible artery with single and double stenoses. Journal of Mechanical Science and Technology, 29: 3549-3560.


• Jahangiri, M., Saghafian, M., & Sadeghi, M. R. (2015). Effects of non-Newtonian behavior of blood on wall shear stress in an elastic vessel with simple and consecutive stenosis. Biomedical and Pharmacology Journal, 8(1): 123-131.


• Sharifzadeh, B., Kalbasi, R., Jahangiri, M., Toghraie, D., & Karimipour, A. (2020). Computer modeling of pulsatile blood flow in elastic artery using a software program for application in biomedical engineering. Computer methods and programs in biomedicine, 192: 105442.


• Jahangiri, M., Haghani, A., Ghaderi, R., & Hosseini Harat, S. M. (2018). Effect of non-Newtonian models on blood flow in artery with different consecutive stenosis. ADMT Journal: 11(1), 79-86.


• ANSYS, Inc. (2009). Filtered Navier-Stokes Equations, ANSYS FLUENT 12.0 Theory Guide. https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node94.htm, accessed Jan., 23, 2009.


• ANSYS, Inc. (2009). Standard k-Model, ANSYS FLUENT 12.0 Theory Guide. https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node58.htm, accessed Jan., 23, 2009.


• Jahangiri, M., Saghafian, M., Sadeghi, M.R., (2014). Numerical study of hemodynamic parameters in pulsatile turbulent blood flow in flexible artery with stenosis. In The 22^st Annual International Conference on Mechanical Engineering-ISME2014, Shahid Chamran University, Ahvaz, Iran.


• Moradicheghamahi, J., Sadeghiseraji, J., Jahangiri, M. (2019). Numerical solution of the Pulsatile, non-Newtonian and turbulent blood flow in a patient specific elastic carotid artery. International Journal of Mechanical Sciences, 150: 393-403.


• Jahangiri, M., Saghafian, M. (2011). Numerical simulation of climb and dispersion of pollutants in different atmospheric condition. In the 19th Annual Conference on Mechanical Engineering-ISME2011, Birjand, Iran.


• Pritchard, P.J., Mitchell, J.W. (2016). Fox and McDonald's Introduction to Fluid Mechanics. John Wiley & Sons. New Jersey, United States.


• Khosrowjerdi, S., Sarkardeh, H. (2021). Effect of arch height on wind load in shape dome structure, Amirkabir Journal of Civil Engineering, 53(2): 627-638.