Investigating the effect of solid solution treatment on the corrosion properties of biodegradable Mg-Zn-RE-xCa (x = 0, 2.5) alloy

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Saeed Alibabaei ¹ , Masoud Kasiri-Asgarani ² , HamidReza Bakhsheshi-Rad ³

1 - Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
3 - Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

Received: 2020-04-14 Accepted : 2020-07-15 Published : 2019-11-01

Keywords:

References:

[1]     Zheng ,Y,F . Gu ,X,N .Witte ,F  “Biodegradable metals” ,Materials Science and Engineering, 77 , 1–34 , 2014.

[2]     Narayanan T,S,N,S . Park ,S . Lee ,M,H. “Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges” , Materials Science, 60 , 1–71 , 2014.

[3]     Montemor ,M,F. “Functional and smart coatings for corrosion protection: a review”  ,Surface and Coatings Technology , 258 , 17–37, 2014.

[4]     Hornberger ,H . Virtanen ,S . Boccaccini ,A,R  “Biomedical coatings on magnesium alloys – a review”. Acta Biomaterialia ;8:2442–2455, 2012.

[5]     Paital ,S,R . Dahotre ,N,B “Calcium phosphate coatings for bio-implant applications: materials, performance factors, and methodologies” Materials Science and Engineering, 66, 1–70, 2009.

[6]     Wu ,G . Ibrahim ,J,M . Chu ,P,K “Surface design of biodegradable magnesium alloys – a review” Surface and Coatings Technology , 233, 2–12, 2013.

[7]     Zhang ,H,X. Wang ,Z,N . Zhou ,Y,G. et al. “Temperature evolution analysis of AZ31B magnesiumalloy during quasistatic fracture” Mater Sci Technol ,32 ,1276–1281 ,2016.

[8]     Chen ,Y . Xu ,Z . Smith,C . et al “Recent advances on the development of magnesium alloys for biodegradable implants”. Acta Biomaterialia , 10, 4561–4573 , 2014.

[9]     Zhou ,L . Liu ,Y . Zhang ,J . et al. “Microstructure and mechanical properties of equal channel angular pressed Mg–Y–RE–Zr alloy”.  Materials Science Technology.;32:969–975 .2016.

[10]  Gu ,X . Zheng ,Y . Cheng ,Y . “In vitro corrosion and biocompatibility of binary magnesium alloys”. Biomaterials. ,30 ,484–498, 2009.

[11]  Sanchez ,A,H,M . Luthringer ,B,J,C . Feyerabend ,F . et al. “Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates: A review”. Acta Biomaterialia. 13, 16–31, 2015.

[12]  Witte ,F . “The history of biodegradable magnesium implants: a review”. Acta Biomaterialia., 6, 1680–1692, 2010.

[13]  Bakhsheshi-Rad ,H,R . Idris ,M,H . Kadir ,M,R,A . et al. “Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys”. Materials and Design. 33, 88–97, 2012.

[14]  Zheng ,Y,F . Gu ,X,N . Xi ,Y,L . et al. “In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy”. Acta Biomaterialia.;6:1783–791. 2010.

[15]  Bakhsheshi-Rad ,H,R . Hamzah ,E . Low ,H,T . et al. “Fabrication of biodegradable Zn-Al-Mg alloy: mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities”. Materials Science and Engineering C.;73: 215–219, 2017.

[16]  Wu,G . Ibrahim, J.M . Chu,P.K ‏. “Surface design of biodegradable magnesium alloys _ A review”; Surface and Coatings Technology, 233, 2-12, 2013.

[17]  Bakhsheshi-Rad, H.R., Abdul-Kadir, M.R., Idris, M.H., Farahany, S., “Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg-0.5Ca-xZn alloys”. Corrosion Science, 64:184–97, 2012.

[18]  Bakhsheshi-Rad, H., Abdellahi, M., Hamzah, E., Bahmanpour, M., “Modelling corrosion rate of biodegradable magnesium-based alloys:The case study of Mg-Zn-RE-xCa (x ¼ 0, 0.5, 1.5, 3 and 6 wt%) alloys”; Journal of Alloys and Compounds, 687, 630-642, 2016.

[19]  Zhou, W.R., Zheng ,Y.F., Leeflang ,M.A., Zhou, J.,  “Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg-Li-(Al)-(RE) alloys for future cardiovascular stent application”. Acta Biomaterialia. 9 (10):8488–98. 2013.

[20]  Witte ,F . Hort ,F. Vogt ,N . Cohen ,C . Kainer ,S . “Degradable Biomaterials Based on Magnesium Corrosion”. Current Opinion in Solid State and Materials Science, 12, 63-72, 2008.

[21]  Bakhsheshi-Rad. H.R , Hamzah, E . Joy , S,L . Medraj. M , Idris. M. H , Mostafa ,A ; “Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys‏”; Materials Science  and Thechnology, 33, 1333-1345 ,2017.

[22]  Zhang ,S,X . Zhang ,X,N . Zhao ,C,L . et al. “Research on an Mg-Zn alloy as a degrad-able biomaterial”. Acta Biomaterialia, 6 (2):626–40, 2010.

[23]  Zhou, T. Chen, D. Chen, Z.H. Chen, J.H. “Investigation on microstructures and properties of rapidly solidified Mg–6wt.%Zn–5 wt.% Ca–3 wt.% Ce alloy”; Journal of Alloys and Compounds , 475, L1-L4, 2009.

[24]  Levi, G. Avraham, S. Zilberov, A. Bamberger, M.; “Solidification, solution treatment and age hardening of a Mg–1.6 wt.% Ca–3.2 wt.% Zn alloy”; Acta Materialia, 54, 523-530, 2006.

[25]  Jun, J. H., Park, B. K., Kim, J. M., Kim, K. T. and Jung, W. J. “Microstructure and Tensile Creep Behavior of Mg-Nd-RE-Ca Casting Alloys”. Key Engineering Materials, 345-346, 557-560, 2007.

[26]  Cai, S. H . Lei, L . Li ,N,F and Feng ,F. “Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg-Zn alloys”. Materials Science and Engineering C-Materials for Biological Applications, 32 (8):2570–2577, 2012.

[27]  Meng, E.C., Guan, S.K., Wang, H.X. and Wang, L.G. “Effect of Electrodeposition Modes on Surface Characteristics and Corrosion Properties of Fluorine-doped Hydroxyapatite Coatings on Mg-Zn-Ca alloy”. Applied Surface Science, 257, 4811-4816, 2011.

[28]  Li, Z., Gu, X., Lou, S., and Zheng, Y., “The development of binary Mg–Ca alloys for use as biodegradable materials within bone”. Biomaterials, 29 (10):1329–44, 2008.

[29]  Wang, B., Gao, J.H., Wang, L.G., Zhu, S.J., and Guan, K ., “Biocorrosion of coated Mg-Zn-Ca alloy under constant compressive stress close to that of human tibia”. Materials Letters 70:174–6, 2012.

[30]  Du, H., Wei, Z.J., Liu, X.W., and Zhang, E.L., “Effects of Zn on the microstructure, mechanical property and bio-corrosion property of Mg-3Ca alloys for biomedical application”. Materials Chemistry and Physics, 125 (3):568–75, 2011.

[31]  Fahamin, A, Tabrizi, B. and Ebrahimi-Kahrizsangi, R . “Synthesis of Calciumphosphate-based Composite Nanopowders by Mechanochemical Process and Subsequent Thermal Treatment”. Ceramics International. 38, 6729-6738, 2012.

[32]  Zhang, E., Yin, D., Xu, L., Lei, Y. and Yang, K . “Microstructure, Mechanical and Corrosion   Properties and Biocompatibility of Mg–Zn–Mn Alloys for Biomedical Application”. Materials  Science and Engineering C, 29, 987-993, 2009.

[33]  Song, G. L. and Song, S. Z. “A Possible Biodegradable Magnesium Implant Material”.  Advanced Engineering Materials, 94, 298-302, 2007.