Subject Areas :
مرتضی طیبی 1 , حسن شریفی 2 , حمید غیور 3
1 - دانشجوی کارشناسی ارشد، دانشگاه شهرکرد، دانشکده فنی و مهندسی، شهر کرد
2 - استادیار، دانشگاه شهرکرد، دانشکده فنی و مهندسی، شهر کرد
3 - استادیار، دانشکده مواد، واحد نجفآباد، دانشگاه آزاد اسلامی، نجف آباد، اصفهان
Keywords:
Abstract :
[1] T. Schmitt, “Al/SiC composites as a base material for high power”, PCIM Europe, Vol. 6, pp. 70–3, 2000.
[2] T. Huber, H. P. Degischer, G. Lefranc & T. Schmitt, “Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles”, Composites Science and Technology, Vol. 66, pp. 2206–2217, 2006.
[3] J. K. Chen, I. S. Huang, “Thermal properties of aluminum–graphite composites by powder metallurgy”, Composites: Vol. 44B, pp. 698–703, 2013.
[4] B. G. Kim, S. L. Dong & S. D. Park, “Effects of thermal processing on thermal expansion coefficient of a 50 vol. % SiCp/Al composite,” Mater. Chem. Phys, vol. 72, pp. 42–47, 2001.
[5] C. H. Jiang, D. Z. Wang & Z. K. Yao, “Analysis of thermal mismatch stress in the particle reinforced composite”, Act Metall. Sin, Vol. 36 (5), pp. 555–560, 2000.
[6] Y. C. Qin, S. Y. He & D. Z. Yang, “Effect of thermal–mechanical cycling on thermal expansion behavior of boron fiber-reinforced aluminum matrix composite,” Mater. Chem. Phys, Vol. 86, pp. 204–209, 2004.
[7] M. Taya, W. D. Armstrong & M. Dunn, “Analytical study on dimensional changes in thermally cycling of metal matrix composites,” Mater. Sci. Eng, Vol. 143A, pp. 143–154, 1991.
[8] J. B. Fogagnolo, D. Amador, E. M. Ruiz-Navas & J. M. Torralba, “Solid solution in Al–4.5 wt% Cu produced by mechanical alloying”, Materials Science and Engineering A, vol. 433, pp. 45–49, 2006.
[9] K. Mizuuchi, K. Inoue, Y. Agari, T. Nagaoka, M. Sugioka, M. Tanaka, T. Takeuchi, J. Tani, M. Kawahara, Y. Makino & M. Ito, “Processing of Al/SiC composites in continuous solid–liquid co existent state by SPS and their thermal properties”, Composites, vol. 43B, pp. 2012–2019, 2012.
[10] R. Arpo´n, J. M. Molina, R. A. Saravanan, C. Garcı´a-Cordovilla, E. Louis & J. Narciso, “Thermal expansion behaviour of aluminium/SiC composites with bimodal particle distributions”, Acta Materialia, Vol. 51, pp. 3145–3156, 2003.
[11] R. J. Arsenault & N. Shi, “Dislocation Generation Due to Differences between the Coefficients of Thermal Expansion”, Materials Science and Engineering, Vol. 81, pp. 175-187, 1986.
[12] S. Ochiai, “Mechanical Properties of Metallic Composites”, Taylor & Francis, 1993.
[13] Z. Wei, P. Maa, H. Wanga, C. Zou, S. Scudino, K. Song, K. G. Prashanth, W. Jiang & J. Eckert, “The thermal expansion behaviour of SiCp/Al–20Si composites solidified under high pressures”, Materials and Design, Vol. 65, pp. 387–394, 2015.
[14] W. A. Uju & I. N. A. Oguocha, “A study of thermal expansion of Al–Mg alloy composites containing fly ash”, Materials and Design, Vol. 33, pp. 503–509, 2012.
[15] Y. Zhang, J. Li, L. Zhao, H. Zhang & X. Wanga, “Effect of metalloid silicon addition on densification, microstructure and thermal–physical properties of Al/diamond composites consolidated by spark plasma sintering”, Materials and Design, Vol. 63, pp. 838–847, 2014.
[16] C. Zhou, G. Ji, Z. Chen, M. Wang, A. Addad, D. Schryvers & H. Wanga, “Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications”, Materials and Design, Vol. 63, pp. 719–728, 2014.
[17] J. M. Lee, S. K. Lee, S. J. Hong & Y. N. Kwon, “Microstructures and thermal properties of A356/SiCp composites fabricated by liquid pressing method”, Materials and Design, Vol. 37, pp. 313–316, 2012.
