Subject Areas :
حسین
شفیعی
1
(مربی، عضو هیئت علمی، دانشکده مهندسی مواد ، موسسه آموزشی عالی غیر انتفاعی صنعتی فولاد، فولاد شهر، اصفهان)
حسن
شفیعی
2
(مربی، عضو هیئت علمی، دانشکده مهندسی مواد ، موسسه آموزشی عالی غیر انتفاعی صنعتی فولاد، فولاد شهر، اصفهان)
علی
شفیعی
3
(دانشیار، عضو هیئت علمی، دانشکده مهندسی مواد ، موسسه آموزشی عالی غیر انتفاعی صنعتی فولاد، فولاد شهر، اصفهان)
Keywords:
Abstract :
[1] E. Lugscheider, O. Knotek, C. Barimani & H. Zimmermann, “Arc PVD-coated cutting tools for modern machining applications,” Surface and Coating Technology, Vol. 94-95, PP. 611-646, 1997.
[2] M. Nordin, M. Larsson & S. Hogmark, “Mechanical and tribological properties of multilayered PVD TiN/CrN”, Vol. 232, No. 2, pp. 221-225, 1999.
[3] Azushima, Y. Tanno, H. Iwata & K. Aoki, “Coefficients of friction of TiN coatings with preferred grain orientations under dry condition”, Vol. 265, PP. 1017-1022, 2008.
[4] S. V. Hainsworth & W. C. Soh, “The effect of the substrate on the mechanical properties of TiN coatings”, Surface and Coatings Technology, Vol. 163-164, PP.515-520, 2003.
[5] S. J. Bull, Bhat D. G. Staia & M. H, “Properties and performance of commercial TiCN coatings. Part 2: Tribological performance”, Surface & Coatings Technology, Vol. 163-164, pp. 507-514, 2003.
[6] J. Singh, J. Thomas Schriemp & D. E. Wolfe, “Electron Beam Physical Vapor Deposition Technology: Present and Future Applications”, The Applied Research Laboratory, The Pennsylvania State University, University Park, PA 16804.
[7] J. Singh, “Nano and macro-structured component fabrication by electron beam-physical vapor deposition (EB-PVD)”, journal of materia, Vol. 40, pp. 1– 26, 2005.
[8] S. PalDey & S. C. Deevi, “Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review”, Materials Science and Engineering A, Vol. 342, pp.58-79, 2003.
[9] Y. L. Su & W. H. Kao, “Optimum multilayer TiN-TiCN coatings for wear resistance and actual application”, Vol. 223, pp. 119-130, 1998.
[10] ASTM G99-05, “Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus”, ASTM Book of Standards; West Conshohocken, Pa, United States, Vol. 3, 2005.
[11] G. A. Fontalvo, R. Humer, C. Mitterer, K. Sammt & I. Schemmel, “Microstructural Aspects Determining the Adhesive Wear of Tool Steels”, Wear, Vol. 260, No. 9-10, pp. 1028 - 1034, 2006.
[12] T. Polcar, R. Novak & P. Siroky, “The tribological characteristics of TiCN coating at elevated temperatures”, Vol. 260, pp. 40-49, 2006.
[13] P.C. Jindal, A. T. Sathanam, U. Schleinkofer & A. F. Shuster, “Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning”, Refractory Metals & Hard Materials, Vol. 17, pp. 163-170, 1999.
[14] C. M. Cotell, J. A. Sprague & F. A. Smist, “ASM Handbook”, Surface Engineering, Second printing, Vol. 5, 1996.
[15] M. Ali, E. Hamzah, I. A. Qazi & M. R. M. Toff,” Effect of catholic arc PVD parameters on roughness of TiN coating on steel substrate”, Current Applied Physics, 2009.
