Investigating the effect of different variables on the strength of the electro fusion welded polyethylene pipes

Subject Areas :

Alireza Araghi ¹ , Amin Akhbarizadeh ² , Mohamadhosein Paydar ³

1 - دانشجوی دکتری، گروه مهندسی متالورژی و مواد، دانشکده مهندسی شیمی و مواد، واحد شیراز، دانشگاه آزاد اسلامی
2 - دکتری، گروه مهندسی متالورژی و مواد، دانشکده مهندسی شیمی و مواد، واحد شیراز، دانشگاه آزاد اسلامی
3 - دکترا، گروه مهندسی متالورژی و مواد، دانشکده مهندسی، دانشگاه شیراز

Received: 2016-04-03 Accepted : 2016-04-03 Published : 2017-02-19

Keywords:

References:

[1]     Malpass DB. Introduction to Industrial Polyethylene: Properties, Catalysts, and Processes: John Wiley & Sons; 2010.

 

[2]     Peacock A. Handbook of Polyethylene: Structures: Properties, and Applications: CRC Press; 2000.

 

[3]     J. Bowman, “A review of the electrofusion joining process for polyethylene pipe systems”, Polymer Engineering & Science, Vol. 37, pp. 674-91, 1997.

 

[4]     J. R. Atkinson & I. M. Ward, “The joining of biaxially oriented polyethylene pipes”, Polymer Engineering & Science, Vol. 29, pp. 1638-41, 1989.

 

[5]     D. S. Caravaca, C. Bird & D. Kleiner, “Ultrasonic phased array inspection of electrofusion joints in polyethylene pipes”, Insight - Non-Destructive Testing and Condition Monitoring, Vol. 49, pp. 83-6, 2007.

 

[6]     Z. Chebbo, M. Vincent, A. Boujlal, D. Gueugnaut & Y. Tillier, “Numerical and experimental study of the electrofusion welding process of polyethylene pipes”, Polymer Engineering & Science, Vol. 55, pp. 123-31, 2015.

 

[7]     A. Guevara-Morales & P. Leevers, “Experimental and numerical investigation of barreling at the cut ends of solid and skinned PE pipes”, Polymer Testing, Vol. 31, pp. 557-63, 2012.

 

[8]     R. Kafieh, T. Lotfi & R. Amirfattahi, “Automatic detection of defects on polyethylene pipe welding using thermal infrared imaging”, Infrared Physics & Technology, Vol. 54, pp. 317-25, 2011.

 

[9]     M. Riahi, H. Arab & M. Ghanati, “Impact analysis of clearance occurring between polymeric pipe and connector in the process of electrofusion (EF) weldment of pipes”, Int J Adv Manuf Technol, Vol. 63, pp. 329-35, 2012.

 

[10] J. Shi, J. Zheng, W. Guo & Y. Qin, “Defects classification and failure modes of electrofusion joint for connecting polyethylene pipes”, Journal of Applied Polymer Science, Vol. 124, pp. 4070-80, 2012.

 

[11] ISO. lastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm, ISO 13954, 1997.