Synthesis and characterization of Fe-Doped hydroxyapatite by in-situ method for use in bone tissue engineering: scaffold application, Biocompatibility and degradation studies
Subject Areas :
Maryam
Maskanati
1
(Department of chemistry, North Tehran Branch,Islamic Azad University, Tehran, Iran)
hamidreza
Aghabozorg
2
(استاد شیمی معدنی، دانشکده شیمی، واحد تهران شمال، دانشگاه آزاد اسلامی، تهران، ایران.)
Masoumeh
meskinfam
3
(استادیار شیمی معدنی، دانشکده شیمی، واحد لاهیجان، دانشگاه آزاد اسلامی، لاهیجان، ایران.)
Fereshteh
Motiei
4
(استادیار شیمی کاربردی، دانشکده شیمی، واحد تهران شمال، دانشگاه آزاد اسلامی، تهران، ایران.)
Keywords: Iron, Chitosan, hydroxyapatite, Tissue Engineering, In-situ,
Abstract :
In the present study, calcium hydroxyapatite-Fe (Fe-HAp) nanocrystalline powder was prepared from a combination of iron ions, calcium nitrate and phosphorus pentoxide by in-situ method. The properties and structure of the synthesized nanocomposite were investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The obtained results confirmed that the produced powder was hydroxyapatite-iron. The morphological properties of the scaffolds also confirmed that Fe-HAp particles distributed properly in the porous structure of chitosan (CS). The obtained samples were subjected to MTT in vitro test in terms of toxicity against fibroblast cells and also for quantitative evaluation of live cells attached and grown on the scaffolds. Therefore, according to the obtained results, this scaffold can be a suitable candidate for bone tissue reconstruction applications.
[1] Kim, C.W.; Talac, R.; Lichun, Lu.; Moore, M.; Bradford, L.; Currier, M.J.; Yaszemski, J ; Biomed. Mater. Res. A 85, 1114–9, 2008.
[2] Shi, X.; Sitharaman, B.; Pham, Q.P.; Liang, F.; Wu, K.; Billups, W.E.; Wilson, L.J.; Mikos, A.G.; J. Biomaterials. 28, 4078-90, 2007.
[3] Song, K.; Liu, T.; Cui, Z.; Li, X.; Ma, X.; J. Biomed. Mater. Res. A. 86, 323-32, 2008.
[4] Cengiz, B.; Gokce, Y.; Yildiz, N.; Aktas, Z.; Calimli, A.; Colloid Surface 32, 29-33, 2008.
[5] Wakamura, M.; Kandori, K.; Ishikawa, T.; Colloids and Surfaces 164, 297-305, 2000.
[6] Zhu, Y.; Zhou, D.; Zan, X.; Sheng, S. and Ye, Q.; Colloids and Surfaces B: Biointerfaces. In Press, 112319, 2022.
[7] Beattie, J.H.; Avenell, A.; Nutrition Rexarch Rrvien.s 5, 167-188, 1992.
[8] Li, Y.; Nam, C.T.; Ooi, C.P.; Journal of Physics: Conference Series 187 012024, 2009.
[9] Kramer, E.R.; Morey, A.M.; Staruch, M.; Suib, S.L.; Jain, M.; Budnick, J.I.; Wei, M.; Materials Science and Engineering 48, 665- 673, 2013.
[10] Kim, S.S.; Park, M.S.; Gwak, S.J.; Choi, C.Y.; Kim, B.S.; Tissue Eng 12, 2997-3006, 2006.
[11] Nie, H.; and Wang, C.H.; J. Control. Release 120, 111-121, 2007.
[12] Ren, J. Ren, T.; Zhao, P.; Huang, Y.; Pan, K.; J. Biomater. Sci. Polym. Ed 18, 505-517, 2007.
[13] Saravanan, S.; Leena, R.S.; Selvamurugan, N.; J. Biol. Macromol 93, 1354-1365, 2016.
[14] Aslani, M.; Meskinfam, M.; Aghabozorg, H.R.; Passdar, H.; Motiee, F.; Journal of Applied Research in Chemistry 10(4), 41-48, 2017.
[15] Yang, L.; Jin, S.; Shi, L.; Ullah, I.; Yu, K.; Zhang, W.; Bo, L.; Zhang, X. and Guo, X.; Chemical Engineering Journal 431(4), 133459, 2022.
[16] Khan, M.N.; Islam, J.M. and Khan, M.A.; J. Biomed. Mater. Res. 100, 3020-3028, 2012.
[17] Oliveira, S.M.; Ringshia, R.A.; Legeros, R.Z.; Clark, E.; Yost, M.J.; Terracio, L.; Teixeira, C.C.; J Biomed Mater Res A. 94, 371-379, 2010.
[18] Valente, J.F.A.; Valente, T.A.M.; Alves, P.; Ferreira, P.; Silva, A. and Correia, I.J.; Mater. Sci. Eng. C. 32, 2596-2603, 2012.
[19] Kim, J.; Kim, I.S.; Cho, T.H.; Lee, K.B.; Hwang, S.J.; Tae, G., Noh, I.; Lee, S.H.; Park, Y. and Sun, K.; Biomaterials 12, 2997-3006, 2007.
[20] Park, K.H.; Kim, S.J.; Lee, W.Y.; Song, H.J. and Park, Y.J.; Ceram. Int. 43, 2786-2790, 2017.
[21] Xianmiao, C.; Yubao, L.; Yi, Z., Li, Z.; Jidong, L.; Huanan, W.; Materials Science and Engineering: C. 29, 29-35, 2009.
[22] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G.; Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
[23] Heidari, F.; Razavi, M.; Bahrololoom, M.E.; Yazdimamaghani, M.; Tahriri, M.; Kotturi, H. and Tayebi, L.; Ceramics International 44, 275-281, 2018.
[24] Silva, D.M.; Caseiro, A.R.; Amorim, I.; Pereira, I.; Faria, F.; Pereira, T.; Santos, J.D.; Gama, F.M.; Maurício, A.C.; Biomedical Materials 11, 065004, 2016.
[25] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G. and Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
[26] Panseri, S.; Cunha, C.; D’Alessandro, T.; Sandri, M.; Giavaresi, G.; Marcacci, M.; Hung, C.T.; Tampieri, A.; Journal of Nanobiotechnology 10, 1-10, 2012.
[28] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G. and Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
_||_[1] Kim, C.W.; Talac, R.; Lichun, Lu.; Moore, M.; Bradford, L.; Currier, M.J.; Yaszemski, J ; Biomed. Mater. Res. A 85, 1114–9, 2008.
[2] Shi, X.; Sitharaman, B.; Pham, Q.P.; Liang, F.; Wu, K.; Billups, W.E.; Wilson, L.J.; Mikos, A.G.; J. Biomaterials. 28, 4078-90, 2007.
[3] Song, K.; Liu, T.; Cui, Z.; Li, X.; Ma, X.; J. Biomed. Mater. Res. A. 86, 323-32, 2008.
[4] Cengiz, B.; Gokce, Y.; Yildiz, N.; Aktas, Z.; Calimli, A.; Colloid Surface 32, 29-33, 2008.
[5] Wakamura, M.; Kandori, K.; Ishikawa, T.; Colloids and Surfaces 164, 297-305, 2000.
[6] Zhu, Y.; Zhou, D.; Zan, X.; Sheng, S. and Ye, Q.; Colloids and Surfaces B: Biointerfaces. In Press, 112319, 2022.
[7] Beattie, J.H.; Avenell, A.; Nutrition Rexarch Rrvien.s 5, 167-188, 1992.
[8] Li, Y.; Nam, C.T.; Ooi, C.P.; Journal of Physics: Conference Series 187 012024, 2009.
[9] Kramer, E.R.; Morey, A.M.; Staruch, M.; Suib, S.L.; Jain, M.; Budnick, J.I.; Wei, M.; Materials Science and Engineering 48, 665- 673, 2013.
[10] Kim, S.S.; Park, M.S.; Gwak, S.J.; Choi, C.Y.; Kim, B.S.; Tissue Eng 12, 2997-3006, 2006.
[11] Nie, H.; and Wang, C.H.; J. Control. Release 120, 111-121, 2007.
[12] Ren, J. Ren, T.; Zhao, P.; Huang, Y.; Pan, K.; J. Biomater. Sci. Polym. Ed 18, 505-517, 2007.
[13] Saravanan, S.; Leena, R.S.; Selvamurugan, N.; J. Biol. Macromol 93, 1354-1365, 2016.
[14] Aslani, M.; Meskinfam, M.; Aghabozorg, H.R.; Passdar, H.; Motiee, F.; Journal of Applied Research in Chemistry 10(4), 41-48, 2017.
[15] Yang, L.; Jin, S.; Shi, L.; Ullah, I.; Yu, K.; Zhang, W.; Bo, L.; Zhang, X. and Guo, X.; Chemical Engineering Journal 431(4), 133459, 2022.
[16] Khan, M.N.; Islam, J.M. and Khan, M.A.; J. Biomed. Mater. Res. 100, 3020-3028, 2012.
[17] Oliveira, S.M.; Ringshia, R.A.; Legeros, R.Z.; Clark, E.; Yost, M.J.; Terracio, L.; Teixeira, C.C.; J Biomed Mater Res A. 94, 371-379, 2010.
[18] Valente, J.F.A.; Valente, T.A.M.; Alves, P.; Ferreira, P.; Silva, A. and Correia, I.J.; Mater. Sci. Eng. C. 32, 2596-2603, 2012.
[19] Kim, J.; Kim, I.S.; Cho, T.H.; Lee, K.B.; Hwang, S.J.; Tae, G., Noh, I.; Lee, S.H.; Park, Y. and Sun, K.; Biomaterials 12, 2997-3006, 2007.
[20] Park, K.H.; Kim, S.J.; Lee, W.Y.; Song, H.J. and Park, Y.J.; Ceram. Int. 43, 2786-2790, 2017.
[21] Xianmiao, C.; Yubao, L.; Yi, Z., Li, Z.; Jidong, L.; Huanan, W.; Materials Science and Engineering: C. 29, 29-35, 2009.
[22] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G.; Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
[23] Heidari, F.; Razavi, M.; Bahrololoom, M.E.; Yazdimamaghani, M.; Tahriri, M.; Kotturi, H. and Tayebi, L.; Ceramics International 44, 275-281, 2018.
[24] Silva, D.M.; Caseiro, A.R.; Amorim, I.; Pereira, I.; Faria, F.; Pereira, T.; Santos, J.D.; Gama, F.M.; Maurício, A.C.; Biomedical Materials 11, 065004, 2016.
[25] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G. and Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
[26] Panseri, S.; Cunha, C.; D’Alessandro, T.; Sandri, M.; Giavaresi, G.; Marcacci, M.; Hung, C.T.; Tampieri, A.; Journal of Nanobiotechnology 10, 1-10, 2012.
[28] Sarath Chandra, V.; Baskar, G.; Suganthi, R.V.; Elayaraja, K.; Ahymah Joshy, M.I.; Sofi Beaula, W.; Mythili, R.; Venkatraman, G. and Narayana Kalkura, S.; ACS Applied Materials & Interfaces 4, 1200-1210, 2012.
