Oxidative desulfurization of light fuel oil by using hydrogen peroxide in the presence of acetic acid catalyst

Subject Areas : Iranian Journal of Catalysis

Neda Ghaeli ¹ ( Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran. )
Mohammad Hassan Vakili ² ( Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran. )

Received: 2020-02-01 Accepted : 2020-03-11 Published : 2020-06-01

Keywords:

References:

[1] R. Javadli, A. De Klerk, Appl. Petrochem. Res. 1 (2012) 3-19.
[2] P. Leprince, Petroleum Refining. Vol. 3 Conversion Processes, Editions Technip. 2001.
[3] S. G. McKinley, R.J. Angelici, Energ. Fuel. 17 (2003) 1480-1486.
[4] X. Ma, J.H. Kim, C. Song,   Fuel Chem. Division Prep. 48 (2003) 135-137.
[5] C. Canales, J. Eyzaguirre, P. Baeza, P. Aballay, J. Ojeda,  Ecol. Chem. Eng.  S. 25 (2018) 549-556.
[6] Mao, C., Zhao, R., Li, X., X. Gao, RSC Adv. 7 (2017) 12805-12811.
[7] S. Gao, X. Chen, X. Xi, M. Abro, W. Afzal, R. Abro, G. Yu, ACS Sustain. Chem. Eng. 7 (2019) 5660-5668.
[8] T.A. Saleh, K.O. Sulaiman, S.A. AL-Hammadi, H. Dafalla, G.I. Danmaliki, J. Clean. Prod. 154 (2017) 401-412.
[9] S. K. Thaligari, V.C. Srivastava, B. Prasad, Int. J. Chem. React. Eng. 15 (2016).
[10] J. Yu, Z. Zhu, Q. Ding, Y. Zhang, X. Wu, L. Sun, J. Du,  Catal. Today 339 (2020) 105-112.
[11] H. Bian, H. Zhang, D. Li, Z. Duan, H. Zhang, S. Zhang, B. Xu, Microporous Mesoporous Mater. 294 (2020) 109837.
[12] A. Moslemi, A.N. Chermahini, J.N. Sarpiri, S.  Rezaei, M. Barati, J Taiwan Inst Chem Eng. 97 (2019) 237-246.
[13] B. Torres, L. Alvarez-Contreras, D. Bahena-Uribe, R.R. Chianelli, M. Ramos, Advanced Catalytic Materials, Current Status and Future Progress, Springer, 2019, pp. 209-216
[14] F. Boshagh, B. Mokhtarani, H.R. Mortaheb, J. Hazard. Mater. 280 (2014) 781-787.
[15] Y. Shiraishi, T. Hirai, I. Komasawa, Ind. Eng. Chem. Res. 37 (1998) 203-211.
[16] P.S. Tripathi, K.K.  Mishra, R.R.   Roy, D.N. Tewary, Appl Radiat Isot. 56 (2002) 975-984.
[17] B.M. Vogelaar, M. Makkee, J.A. Moulijn, Fuel Process. Technol. 61 (1999) 265-277.
[18] K.X. Lee, J.A. Valla, Reaction Chem.  Eng. 4 (2019) 1357-1386.
[19] T.A. Saleh, J. Clean. Prod. 172 (2018) 2123-2132.
[20] K.X. Lee, J.A. Valla, Appl. Catal.  201 (2017) 359-369.
[21] Srivastava, V.C. RSC Adv. 2 (2012) 759-783.
[22] P.T. Vasudevan, J.G. Fierro, Catal Rev Sci Eng. 38 (1996), 161-188.
[23] H. Mei, B.W. Mei, T.F. Yen, Fuel 82 (2003) 405-414.
[24] E. W.Qian, J. Japan Pet. Inst. 51 (2008) 14-31.
[25] J. P. Nehlsen, Developing clean fuels: Novel techniques for desulfurization. Princeton, New Jersey, 2006.
[26] M.F. Ali, A. Al-Malki, B. El-Ali, G. Martinie, M.N. Siddiqui, Fuel 85 (2006) 1354-1363.
[27] J.L. García-Gutiérrez, G.A. Fuentes, M.E. Hernández-Terán, P. Garcia,  F. Murrieta-Guevara, F. Jiménez-Cruz, Appl. Catal. A 334 (2008) 366-373.
[28] R. Javadli, A. De Klerk, Appl. Petrochem. Res. 1 (2012) 3-19.
[29] J. M. Fraile, C. Gil, J. A. Mayoral, B. Muel, L. Roldán, E. Vispe, F. Puente, Appl. Catal. 180 (2016) 680-686.
[30] A. Bourane, O. Koseoglu, A. Al-Hajji, F. Adam, H. Muller, React. Kinet. Mech. Catal. 126 (2019) 365-382.
[31] M.D.G. de Luna, M.W. Wan, L.R. Golosinda, C.M. Futalan, M.C. Lu,  Energy Fuels 31 (2017) 9923-9929.
[32] Y. Muhammad, A. Shoukat, A.U. Rahman, H.U. Rashid, W. Ahmad, Chin. J. Chem. Eng. 26 (2018) 593-600.
[33] J. Xiao, L. Wu, Y. Wu, B. Liu, L. Dai, Z. Li, H. Xi, Appl. Energy 113 (2014) 78-85.
[34] J. Wang, D. Zhao, K. Li, Energy Fuels 24 (2010) 2527-2529.
[35] Z. Ismagilov, S. Yashnik, M. Kerzhentsev, V. Parmon, A. Bourane, F.M. Al-Shahrani, O.R. Koseoglu, Catal. Rev. Sci. Eng. 53 (2011) 199-255.
[36] D. Margeta, K. Sertić-Bionda, L. Foglar, Appl Acoust. 103 (2016) 202-206.
[37] Zhang Q., M. Zhu, I. Jones, Z. Zhang, D. Zhang. Chemeca 2019: Chemical Engineering Megatrends and Elements, Sydney, Australia, 2019: 509-519.
[38] L. Hao, L. Sun, T. Su, D. Hao, W. Liao, C. Deng, H. Lü, Chem. Eng. J. 358 (2019) 419-426.
[39] S. Xun, W. Jiang, T. Guo, M. He, R. Ma, M. Zhang, H. Li, J. Colloid Interface Sci. 534 (2019) 239-247.
[40] P. S. Sinhmar, P.R. Gogate, Ultrason Sonochem. 63 (2020) 104925.
[41] R.C. Weast, M.J. Astle, W.H. Beyer, CRC handbook of chemistry and physics (Vol. 69). Boca Raton, FL: CRC Press, 1988.
[42] I. Babich, J, A. Moulijn, Fuel  82 (2003) 607–631
[43] I. Funakoshi, T. Aida, (1998) U.S. Patent No. 5,753,102. Washington, DC: U.S. Patent and Trademark Office.
[44] P. Forte, U.S. Patent No. 5,582,714. Washington, DC: U.S. Patent and Trademark Office, 1996.
[45] A. Haghighat Mamaghani, S. Fatemi, M. Asgari, Int. J. Chem. Eng. 2013 (2013) 1-10.
[46] M.R. Jalali, M.A.  Sobati, Appl. Therm. Eng. 111 (2017) 1158-1170.
[47] H. Aydın, C. İlkılıç, Fuel 102 (2012) 605-612.
[48] F.A. Duarte,  P.D.A. Mello, C.A. Bizzi, M.A. Nunes, E.M. Moreira, M.S. Alencar, E.M. Flores,  Fuel 90 (2011) 2158-2164.
[49] A. M. Dehkordi, Z. Kiaei, M.A. Sobati, Fuel Process. Technol. 90 (2009) 435-445.
[50] P.D.A. Mello, F.A. Duarte, M.A.  Nunes, M.S. Alencar, E.M. Moreira, M.  Korn, E.M.  Flores, Ultrason Sonochem. 16 (2009) 732-736.
[51] F. Zannikos, E. Lois, S. Stournas, Fuel Process. Technol. 42 (1995) 35-45.
[52] A. Bösmann, L. Datsevich, A. Jess, A. Lauter, C. Schmitz, P. Wasserscheid, Chem. Comm. 23 (2001) 2494-2495.
[53] M. A. Sobati, A. M. Dehkordi, M. Shahrokhi. Fuel Process. Technol. 91 (2010) 1386-1394.
[54] M. Iqbal, A. Ghaffar, A. Nazir, M. Yameen, B. Munir, N. Nisar, T.H. Bokhari, Energ Source Part A 39 (2017) 1109-1115.