Calculation of the Behavior Coefficient of the Combined System of Special Moment-resisting Frame and Concrete Shear Wall with Openings Reinforced with CFRP
Subject Areas : Analysis of Structure and Earthquake
Seyed Fathollah Sajedi
1
(
Associate professor, Department of Civil Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran
)
Mostafa Echresh Amiri
2
(
M.Sc. student, Department of Civil Engineering, Abadan Branch, Islamic Azad University, Abadan, Iran
)
Keywords: seismicity, behavior coefficient, Special concrete moment-resisting frame, Shear wall with opening, Carbon fiber reinforced polymers (CFRP),
Abstract :
Today, the reinforcing polymer composites are widely applied to improve the seismic behavior of the structures. The history of structures reinforced with polymer sheets is mostly related to the reinforcement of beams and columns. In this study, the behavior coefficient of a special concrete moment-resisting frame in combination with a concrete shear wall (CSW) with opening and retrofitted with Carbon fiber reinforced polymer (CFRP) was calculated. The CSW was added as a reinforcement to the pre-designed concrete moment-resisting frame at two heights of 8 and 12 floors, then circular, rhombic and rectangular openings were created in the walls and CFRP were added around the openings along 45 and 90 degrees on one side and both sides of the wall. The results of the analyses presented that the strength of the structure decreased with the opening of the wall, and when the fibers were added around the opening, the resistance increased slightly; this slight increase in strength is due to the low amount of fibers. To cope with this issue, a layer of fibers was glued to the wall area on one side, on both sides, and two layers of fibers on one side of the wall around the opening. The interpretation of the results indicated that the higher the level of reinforcing fibers on the wall, the higher the capacity and behavior coefficient of the structure. The addition of CFRP on both sides of the wall had a better effect on the behavior coefficient and capacity of the structure than the application of two layers of fibers on one side of the wall.
_||_
