Number 3 Volume 9

Open Access Article

1 - Adsorption of Ni(II) and Cd(II) Ions from Aqueous Solutions by Modified Surface of Typha latifolia L. Root, as an Economical Adsorbent
Gholamreza Ebrahimzadeh Rajaei Hossein Aghaie Karim Zare Mehran Aghaie

The modified surface of Typha latifolia L. root (MSTL), as an alternative economical adsorbent, wasused for the removal of Ni (II) and Cd(II) ions from aqueous solutions. The effect of initial pH, initialconcentration of metal ion, and contact time was investigated in a More

The modified surface of Typha latifolia L. root (MSTL), as an alternative economical adsorbent, wasused for the removal of Ni (II) and Cd(II) ions from aqueous solutions. The effect of initial pH, initialconcentration of metal ion, and contact time was investigated in a batch system at room temperature.The kinetics data could be fitted well by pseudo-second-order model with correlation coefficientvalues greater than 0.99. The mechanism of adsorption process was tested by fitting the experimentaldata by intraparticle diffusion kinetic and Boyd kinetic equations. The adsorption data could be fittedwell by Langmuir and Freundlich adsorption isotherms. The maximum adsorption capacity of MSTLwas determined to be 37.31 mg g-1 for Ni2+ and 28.90 mg g-1 for Cd2+ at room temperature when theinitial concentration of both metal ion was 100 mg/L, and the pH of the solution was 5.00 and 4.00for Ni2+ and Cd2+, respectively. It has been suggested that the MSTL can be successfully applied forthe removal of toxic heavy metal ions such as Ni2+ and Cd2+ from aqueous solutions. Manuscript profile

Open Access Article

2 - Investigation of the Effect of Vanillin as a Green Corrosion Inhibitor for Stainless Steel Using Electrochemical Techniques
M. Shahidi E. Sasaei M. Ganjehkaviri M.R. Gholamhosseinzadeh

Vanillin offers interesting possibilities for corrosion inhibition because of its safe use and highsolubility in water. The effect of vanillin on the corrosion inhibition of AISI 304 stainless steel in0.5M H2SO4 solution has been studied using potentiodynamic polarizati More

Vanillin offers interesting possibilities for corrosion inhibition because of its safe use and highsolubility in water. The effect of vanillin on the corrosion inhibition of AISI 304 stainless steel in0.5M H2SO4 solution has been studied using potentiodynamic polarization and electrochemicalimpedance spectroscopy (EIS). Furthermore, this paper demonstrates that the electrochemical noise(EN) technique under open circuit conditions as the only truly noninvasive electrochemical methodcan be applied to investigate the corrosion inhibition. According to calculation of the total amount ofnoise charges due to all partial signals resulted from wavelet analysis of EN current data, it ispossible to obtain the inhibition efficiency (IE) of an inhibitor. These IE values show a reasonableagreement with those obtained from potentiodynamic polarization and EIS measurements. Manuscript profile

Open Access Article

3 - Interaction of Pyrimidine Nucleobases with Silicon Carbide Nanotube: Effect of Functionalization on Stability and Solvation
S. Ketabi S. M. Hashemianzadeh

This study is about Complexes of Li doped silicon carbide nanotube with Thymine and Cytosine ingas phase and aqueous solutions. Li doped silicon carbide nanotube and its pyrimidine nucleobasecompounds were first modeled by Quantum mechanical calculations in gas phase an More

This study is about Complexes of Li doped silicon carbide nanotube with Thymine and Cytosine ingas phase and aqueous solutions. Li doped silicon carbide nanotube and its pyrimidine nucleobasecompounds were first modeled by Quantum mechanical calculations in gas phase and in water.Calculated binding energies indicated the stronger ability of thymine to functionalize silicon carbidenanotube than Cytosine. After that, Monte Carlo simulation and Free Energy Perturbation methodwas utilized to calculate solvation free energies and complexation free energies to evaluate solvationbehavior and stability of the related structures. The results indicated that Li doped silicon carbidenanotube-thymine has more stability in water. Manuscript profile

Open Access Article

4 - The study of Lysozyme adsorption onto 2-hydroxyethylmethacrylates and Silicon Hydrogel Contact Lenses
Omid Moradi

In order to increase the water content and the oxygen permeability of hydrogels used in themanufacture of contact lenses, the polar monomer Silicon Hydrogel Contact Lenses (SHCL), and 2-hydroxyethyl methacrylate (HEMA) were copolymerized with the hydrogels. Due to the p More

In order to increase the water content and the oxygen permeability of hydrogels used in themanufacture of contact lenses, the polar monomer Silicon Hydrogel Contact Lenses (SHCL), and 2-hydroxyethyl methacrylate (HEMA) were copolymerized with the hydrogels. Due to the presence ofpolar monomers in the conventional contact lenses, the major component of the human tear,lysozyme is extensively adsorbed onto their surfaces. The adsorption of lysozyme onto the contactlens’ surface leads to limitations in its application. The present study concentration of lysozyme,adsorbed onto the surface of HEMA and SHCL hydrogels were measured by UV-Vis spectroscopy.The lysozyme employed was obtained from solutions with similar to concentration of artificial tear.The adsorption results were examined by the Langmuir adsorption isotherm and the constants of thisisotherm were also evaluated. Manuscript profile

Open Access Article

5 - Computational study of chemical properties of Captopril drug and the connected form to Fullerene (C60) as a medicine nano carrier
Roya Ahmadi

In this research at the first, captopril drug (CA) and its fullerene connected form (FCA) wereoptimized. Natural Bond Orbital (NBO) calculations for these compounds were carried out at theB3LYP/6-31G quantum chemistry level, in the gas phase and the liquid phase. These More

In this research at the first, captopril drug (CA) and its fullerene connected form (FCA) wereoptimized. Natural Bond Orbital (NBO) calculations for these compounds were carried out at theB3LYP/6-31G quantum chemistry level, in the gas phase and the liquid phase. These calculations canbe performed at different accuracy levels depending on the aim of the theoretical study [1]. Forinstance, Density Functional Theory (DFT) can be used to calculate an accurate electronic structure,HOMO and LUMO energies, Mulliken charge of atoms, energetic_orbital levels, chemical hardness,chemical potential and electrophilicity of systems, and finally chemical, physical, biological,pharmacological and industrial of fullerene and fullerene derivatives [47]. Theoretical calculationssuch as NBO are very important to understand the pathways of electron transfer in assemblies.Consequently, the obtained results showed that energy orbital levels decreased considerably bylinking structure of Captopril to structure of fullerene C60. In the study some other characteristicssuch as chemical potential, chemical hardness, electrophilicity in these structures; it was found thatthey changed considerably. These changes show dependency of the results, on power of electronaffinity of C60. In another part, the valence electrons populations for carbons, nitrogen, oxygens andhydrogens atoms in similar position for FCA and CA were compared. Finally the data were comparedand discussed. Manuscript profile

Open Access Article

6 - (1E,2E) -bis (2-aminophenyl) N'1,N'2-dihydroxyethane bis (imidothioate) as a neutral carrier in ion-selective electrode for Ni(II) and it computational studies
M. H. Fekri M. Darvishpour

A PVC membrane Ni(II) ion selective electrode has been constructed using (1E,2E)-bis(2-aminophenyl)N'1,N'2-dihydroxyethanebis as membrane carrier. The electrode exhibited a goodpotentiometric response for Ni(II) over a wide concentration range 1.0×10-4 to 1.0&time More

A PVC membrane Ni(II) ion selective electrode has been constructed using (1E,2E)-bis(2-aminophenyl)N'1,N'2-dihydroxyethanebis as membrane carrier. The electrode exhibited a goodpotentiometric response for Ni(II) over a wide concentration range 1.0×10-4 to 1.0×10-1M with aslope of 29.4±0.5 mV/decade a and a working pH range of 6.5-9.0. It had a fast response time of≤20s. The best performance was observed with the membrane having 30.5% PVC, 3.0% ligand,61.0% acetophenone and 5.5% oleic acid composition.In this work, the ligand structure studied by ab initio HF calculations using a standard 6-31G* basisset and LanL2DZ. Manuscript profile

Open Access Article

7 - Preparation and Characterization of Activated Carbon derived from olive stone as adsorbent for Congo Red
S. Javad Hosseini H. Aghaie M. Ghaedi

Carbon activated powdered was prepared from activated carbon derived from olive stone. Then byusing the surface methodology, many parameters such as pH, furnace temperature (T), acid ratio,time of activation that affect on the qualities prepared activated carbon produce More

Carbon activated powdered was prepared from activated carbon derived from olive stone. Then byusing the surface methodology, many parameters such as pH, furnace temperature (T), acid ratio,time of activation that affect on the qualities prepared activated carbon produced and its efficiencywere investigated. In addition, the adsorption of Congo Red onto the activated olive stone carbonactive was studied and removal or adsorption percent as response was reported. By applying surfacemethodology we obtained optimum conditions, at the other hand next researches can use theseconditions to produce activated carbon by high efficiency from Olive stone as natural adsorbent. Manuscript profile

Open Access Article

8 - Application of a New Macrocyclic -PVC Electrode to Potentiometric Studies of Fe(III) Ion
R. Aminameli M. H. Fekri H. Shafie M. Darvishpour H. Khanmohammadi

A PVC membrane Fe(III) ion selective electrode has been constructed using a new macrocyclic asmembrane carrier.The electrode exhibits a good potentiometric response for Fe(III) over a wideconcentration range 1.0×10-4 to 1.0×10-1M with a slope 19.4±0.5 More

A PVC membrane Fe(III) ion selective electrode has been constructed using a new macrocyclic asmembrane carrier.The electrode exhibits a good potentiometric response for Fe(III) over a wideconcentration range 1.0×10-4 to 1.0×10-1M with a slope 19.4±0.5 mV/decade a and a working pHrange of 6.5-9.0. It has a fast response time ≤30s.The best performance was observed with themembrance having the 30.5% PVC,3.0% ligand, 61.0% acetophenone and 5.5% oleic acidcomposition. Manuscript profile

XML

List of Articles