XML
-
-
List of Articles
-
Open Access Article
1 - Application of Magnetic Nano Adsorbent Fe2O3 for Removal of Hazardous Ponceau-S Dye from Aqueous Solution
B. N. Patil D. S. Shirsath Y. V. Marathe V. S. ShrivastavaThe photodegradation of Ponceau-S dye was investigated using UV radiation in presence of nanosized Fe2 O3 .Removal efficiency of Ponceau-S was sensitive to the operational parameters such as dye concentration, catalyst dose, pH, contact time, TOC and COD. The photocatal MoreThe photodegradation of Ponceau-S dye was investigated using UV radiation in presence of nanosized Fe2 O3 .Removal efficiency of Ponceau-S was sensitive to the operational parameters such as dye concentration, catalyst dose, pH, contact time, TOC and COD. The photocatalytic treatment of red colored Ponceau-S dye by magnetic nano semiconductor (Fe2 O3 )is an effective, economic and faster mode. The kinetics and isotherm studies were carried out. A simple kinetics model was proposed which confirmed pseudo second order reaction. Langmuir isotherm fitted this study. The optimum conditions for the degradation of the dye were initial concentration 50 mgL-1, pH 8, contact time 20 minutes and catalyst dose 5 gL-1 of Fe2 O3 .The semiconductor photocatalyst was also carried out for SEM and XRD analysis which confirms the utilized semiconductor was nanosized. Manuscript profile -
Open Access Article
2 - Synthesis and Characterizations of Silica Nanoparticles by a New Sol-Gel Method
B. Gorji M.R. Allahgholi Ghasri R. Fazaeli N. NiksiratSilica nanoparticles were synthesized by chemical methods from tetraethylorthosilicate (TEOS), polyethylene glycol 5% and hydrochloric acid 0.001 N. The sol-gel process was applied for the preparation of nano silica gel. This method is hydrolysis and condensation reacti MoreSilica nanoparticles were synthesized by chemical methods from tetraethylorthosilicate (TEOS), polyethylene glycol 5% and hydrochloric acid 0.001 N. The sol-gel process was applied for the preparation of nano silica gel. This method is hydrolysis and condensation reactions of TEOS as precursor of silica. The optimal synthesis conditions for the preparation of silica nanoparticles were obtained and the produced silica nanoparticles were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicated that the silica nanoparticles were successfully formed. The prepared samples change from amorphous to α-crystallite phase. The XRD analysis indicated the amorphous structure of the synthesized silica nanoparticles while the SEM and TEM images exhibited monodispersedNano sized silica particles with a size about 34 nm. In this study, the soft process of sol-gel reaction is favourable from a view point of energy conservation. Additionally, the advantages of this technique were the purity of products and ability to control nanometer sized internal structure. Manuscript profile -
Open Access Article
3 - The Study of Biodiesel Characterization Obtained from CapparisSpinosa Oil Seed
K. Tahvildari A. Sharifi E. DelrishBiodiesel is usually produced from food-grade vegetable oil using trans-esterification process. As an effective factor on the biodiesel characteristics of the biodiesel is the kind of feedstock which is used, so finding a proper feedstock for using initially has an impo MoreBiodiesel is usually produced from food-grade vegetable oil using trans-esterification process. As an effective factor on the biodiesel characteristics of the biodiesel is the kind of feedstock which is used, so finding a proper feedstock for using initially has an important role for different places. So, in this research, disposal substances of Capparis Spinosa are used as a feedstock for producing biodiesel because it was found that it contains nearly 30% triglyceride oils which are mostly based on linoleic and oleic triglycerides. After the extraction of oil, oil seeds of Capparis Spinosa were reacted with methanol 99% in press of basic homogenous catalyst (KOH) and (NaOH). Properties of biodiesel are evaluated by fuel standard test, and the results are compared with ASTM D6751 standards. Saponification number (SN), Iodine value (IV), Cetane number (CN), Viscosity (VS), Flash point (FP), Density (DN), Pour point (PP), and Cloud point (CP) of fatty acid methyl esters of Capparis Spinosa seed oil were empirically determined. Fatty acid composition, IV and CN were used to predict the quality of fatty acid methyl esters of oil for use as biodiesel. All its properties were in allowed limitation of ASTM D6751 standards. The obtained products were analyzed with FTIR and GC-MS spectrum. And by the GC-MS, all sorts of methyl ester composition were identified. Concerning the obtained results from the analysis of the sample, it showed that reaction progress was more in four hours of reaction. Manuscript profile -
Open Access Article
4 - Determination of Sitagliptin Phosphate in Bulk Drugs by Extractive Spectrophotometric Method
C. Bala Sekaran D. RavisankarAn extractive spectrophotometric method is described for the assay of sitagliptin phosphate in bulk drug and in tablets. Sitagliptin phosphatewas extracted as an ion-pair complex from the solution containing Eriochrome black T and 0.1N HCl into chloroform and the absorb MoreAn extractive spectrophotometric method is described for the assay of sitagliptin phosphate in bulk drug and in tablets. Sitagliptin phosphatewas extracted as an ion-pair complex from the solution containing Eriochrome black T and 0.1N HCl into chloroform and the absorbance of the complex was measured at 500nm.The working conditions of the method were investigated and optimized. Beer’s law plot showed a good correlation in the concentration range of 1–25 µg ml-1. Sensitivity indices such as molar absorptivity, Sandell’s sensitivity, limits of detection and quantification are reported. Precision and accuracy of the methods were established. The method was successfully applied to the assay of sitagliptin phosphate in tablet dosage forms with recoveries varying from 99.70 to 101.23% and standard deviation from 0.428 to 0.983. The results were statistically compared with those of the reference method. Manuscript profile -
Open Access Article
5 - Synthesis of Functionalized Aryl-vinyl Ethers as Building Blocks and Auxiliaries in Organic Synthesis
B. Mohtat L. Pirhadi S. Azimzadeh H. Djahaniani5- hydroxyisoquinoline undergoes a smooth reaction with alkyl propiolates in the presence of triphenylphosphine (15 mol%) to produce the corresponding (E)-alkyl 3-(isoquinolin-5-yloxy) acrylate in good yields. When the reaction was performed by 2-methyl 4-hydroxyquinoli More5- hydroxyisoquinoline undergoes a smooth reaction with alkyl propiolates in the presence of triphenylphosphine (15 mol%) to produce the corresponding (E)-alkyl 3-(isoquinolin-5-yloxy) acrylate in good yields. When the reaction was performed by 2-methyl 4-hydroxyquinoline and 3-nitro 4-hydroxypyridine, similar aryl vinyl ethers were obtained. Manuscript profile -
Open Access Article
6 - Unidimensional Thin Layer Chromatography of Salicylic Acid Derivatives on Boric Acid-Impregnated Plates in Drugs Studies
H. Ahmad Panahi E. Moniri A. Izadi M. M. Parvin A. Rahimi M. ManoochehriA unidimensional Thin Layer Chromatography system for the separation of salicylic acid and its derivatives (sulfosalicylic acid and Aspirin) has been developed. The separation was successfully using a solvent system of chloroform-methanol-water-ammonium hydroxide 120:75 MoreA unidimensional Thin Layer Chromatography system for the separation of salicylic acid and its derivatives (sulfosalicylic acid and Aspirin) has been developed. The separation was successfully using a solvent system of chloroform-methanol-water-ammonium hydroxide 120:75:6:2 (V/V) as mobile phase on TLC plates impregnated with boric acid. The method is based on different behavior of investigated compounds in impregnated TLC plates with different amount of boric acid. The effect of boric acid contents of TLC plates on separation factors like resolution (Rs ), capacity factor (k’) and selectivity factor (α) were investigated. Manuscript profile -
Open Access Article
7 - Synthesis of Iron Yttrium Garnet Nanoparticles by Reverse Microemulsion Method
A.S. Emami Meibodi A. Ghorbani M. AdeliColloidal nanodispersion of Iron Yttrium Garnet has been preparedbymixing the two ternary mixture of Triton X-100 (surfactant), n-heptane and aqueous solution that differing only in the aqueous phase.Ethanolwas added as cosurfactant and mixed them by ultrasound bath. By MoreColloidal nanodispersion of Iron Yttrium Garnet has been preparedbymixing the two ternary mixture of Triton X-100 (surfactant), n-heptane and aqueous solution that differing only in the aqueous phase.Ethanolwas added as cosurfactant and mixed them by ultrasound bath. By mixing these twomicroemulsions, Iron Yttrium garnet (Y3 Fe5 O12) nanodispersionwas obtained. Solids were settled by centrifuge, washed and dried,then solids were calsinatedat 800 ◦C, 2 hour, and were characterized them by Scanning Electronic Microscope (SEM). Manuscript profile -
Open Access Article
8 - Application of Hammett Constant for Prediction of Acidity Properties of Substituted Benzoic Acid
F.R. Nikmaram A. Mohamadi M. Agaie F. Moradi M. GhahrmaniHammett constants (σ) can be important factor to understanding substitution and position effects on benzoic acid. This report describes a computational study of ∆G◦ and σ for six substituted benzoic acid (X= F,Cl ,OH ,NH2 ,CN,NO2 )and phenylacetic acid subst MoreHammett constants (σ) can be important factor to understanding substitution and position effects on benzoic acid. This report describes a computational study of ∆G◦ and σ for six substituted benzoic acid (X= F,Cl ,OH ,NH2 ,CN,NO2 )and phenylacetic acid substituted (X=OH ,NH2 ) at para and meta positions ingas and aqueousphases by DFT method and comparesit to available experimental and theoretical results. Manuscript profile
-
The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024