فهرس المقالات Triton X-100

• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  1 - Photocatalytic Degradation of Triton X-100 by Zinc oxide Nanoparticles
  Masoud Giahi Faegheh Ghanbari
  In this study the application of ZnO nanoparticles to UV photocatalytic degradation of nonionic surfactantTriton X-100 in aqueous media was investigated. The affecting factors on the photodegradation such as TritonX-100 initial concentration, nanocatalyst weight, pH, te أکثر

  In this study the application of ZnO nanoparticles to UV photocatalytic degradation of nonionic surfactantTriton X-100 in aqueous media was investigated. The affecting factors on the photodegradation such as TritonX-100 initial concentration, nanocatalyst weight, pH, temperature and other parameters were studied anddescribed in details. The degradation rate was found to be strongly influenced by all the above parameters .Theoptimized conditions for maximum amount of degradation were also determined Results showed that thephotocatalytic degradation process using UV light as an irradiation source, and Nanoparticles of ZnO as aphotocatalyst, was applicable for the degradation of Triton X-100 in aqueous solution and wastewater samples. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  2 - photocatalytic degradation of Triton X-100 in aqueous phase with Zinc oxide as a nanoparticle under UV light irradiation
  M. Giahi F. Ghanbari
  The photocatalytic degradation of nonionic surfactant Triton X-100 was studied by a batch process using ZnOcommercial powders as the catalyst on irradiation with UV light and its behaviour comparatively with respect toZnO nanoparticles with diameter size 20 nm. The effe أکثر

  The photocatalytic degradation of nonionic surfactant Triton X-100 was studied by a batch process using ZnOcommercial powders as the catalyst on irradiation with UV light and its behaviour comparatively with respect toZnO nanoparticles with diameter size 20 nm. The effects of different conditions such as catalyst type, amount ofthe photocatalyst, pH of the system, initial concentration and electron acceptors were investigated ondegradation. The results showed that the photocatalytic degradation of Triton X-I00 was strongly influenced bythese parameters. Therefore, the best conditions for the photocatalytic degradation of Triton X-100 wereobtained. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  3 - Synthesis and Surfactant Effect on Structural Analysis of Nickel Doped Cobalt Ferrite Nanoparticles by C-precipitation Method
  Pirouz Derakhshi Roshanak Lotfi
  Nanoparticles of nickel substituted cobalt ferrite (Nix Co1-xFe2 O4 : 0£ X£ 1) have been synthesized by co-precipitation method. Triton x-100 and oleic acid as surfactants were used. Particles size as estimated by the full width half maximum (FWHM) of the st أکثر

  Nanoparticles of nickel substituted cobalt ferrite (Nix Co1-xFe2 O4 : 0£ X£ 1) have been synthesized by co-precipitation method. Triton x-100 and oleic acid as surfactants were used. Particles size as estimated by the full width half maximum (FWHM) of the strongest X-ray diffraction (XRD) peak were found 17 and 21nm. Their morphology structure have been determined by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis confirms the presence of Co, Ni, Fe and oxygen as well as the desired phases in the prepared nanoparticles. The results of SEM show that the surfactant played an important role in morphology of nanoparticles. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  4 - Sol-gel synthesis of nanoporous γ-alumina using TX-100 or gelatin/TX-100 mixture as effective catalysts for dehydration of alcohols
  Soheyl Alidoust Mehdi Zamani Morteza Jabbari
  In this study, the nanoporous γ-alumina catalysts were prepared by the sol-gel method using hydrolysis of aluminum isopropoxide in the presence of TX-100 or gelatin/TX-100 mixture. Catalysts were characterized by XRD, FT-IR, TEM, BET-BJH and N2 adsorption-desorpti أکثر

  In this study, the nanoporous γ-alumina catalysts were prepared by the sol-gel method using hydrolysis of aluminum isopropoxide in the presence of TX-100 or gelatin/TX-100 mixture. Catalysts were characterized by XRD, FT-IR, TEM, BET-BJH and N2 adsorption-desorption isotherms. To investigate reactivity and selectivity of the synthesized catalysts, dehydration reaction of 2-octanol was carried out in a plug flow vertical reactor at 200 °C. The main products of elimination reaction were 1-octene, 3-octene, cis- and trans-2-octene, which were identified by GC-MS. The reaction conversion and yieldof the products were determined using GC. The prepared catalysts had nanometer-sized pores, high surface area and large pore volume. Their catalytic activity for dehydration of 2-octanol was higher than non-porous γ-alumina catalysts. These compounds could be used as effective catalysts for dehydration of alcohols. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  5 - Remediation of Glyphosate Polluted Soil Using Commelina Erecta and Triton X-100
  Sebastian Komi Comfort Monago-Ighorodje Ogechukwu Ezim Idongesit Archibong Kelechi Nwauche Justice Osuoha
  10.22034/jchr.2019.669293
  This study was carried out to investigate the potentials of Commelina erecta and triton X-100 in remediating glyphosate polluted soil. Humus soil sample was collected from a vegetable garden in Alakahia community in Rivers State, Nigeria and was subsequently divided int أکثر

  This study was carried out to investigate the potentials of Commelina erecta and triton X-100 in remediating glyphosate polluted soil. Humus soil sample was collected from a vegetable garden in Alakahia community in Rivers State, Nigeria and was subsequently divided into different treatment groups I-VI each containing 2 kilograms of the soil sample mixed with 50ml of glyphosate in a polypropylene bag. The different treatment groups were incubated at 28-30 oC for 60 days and thereafter analysed for pH, conductivity, heavy metals, mineral elements, organic ions, total organic carbon (TOC) and nitrogen (TON) contents of the soil. The least pH value (7.01) was recorded in group III while the highest conductivity value (4173.33µs/cm) was observed in group IV. Copper, nickel and cadmium levels in all the amended groups were reduced when compared with the control. Generally, the mineral levels were increased in the amended groups when compared with the control. The TOC and TON contents of the amended soil did not exhibit significant difference when compared with the control except for group IV. تفاصيل المقالة