فهرس المقالات Mg alloys

• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  1 - Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy
  Hooman Abedi Massoud Emamy Hamed Mirzadeh Jafar Rassizadehghani M. Ra'ayatpour
  The effects of micro-addition by rare earth (RE) elements (via cerium-based mischmetal) and hot deformation (via extrusion process) on the microstructure and mechanical properties of Mg-0.5Zn-0.5Zr alloy were studied. Optical microscopy, scanning electron microscopy (SE أکثر

  The effects of micro-addition by rare earth (RE) elements (via cerium-based mischmetal) and hot deformation (via extrusion process) on the microstructure and mechanical properties of Mg-0.5Zn-0.5Zr alloy were studied. Optical microscopy, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and tensile testing were used for characterization of alloys in the as-cast and wrought conditions. It was found that the addition of 0.5 wt% RE combined with the hot extrusion process could remarkably refine the grain size from 1320 µm for the as-cast Mg-0.5Zn-0.5Zr alloy to the recrystallized grain size of 1.3 µm for the extruded Mg-0.5Zn-0.5Zr-0.5RE alloy. Compared to the as-cast counterparts, the ultimate tensile strength (UTS) and total elongation to failure were significantly enhanced by the extrusion process. Quantitatively, the UTS of ~ 300 MPa with the total elongation of ~ 18% was obtained for the extruded Mg-0.5Zn-0.5Zr-0.5RE alloy, which reveals the favorable effects of the ultra grain refinement on the enhancement of the mechanical properties of magnesium alloys. تفاصيل المقالة