فهرس المقالات Graphite Electrode

• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  1 - Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining
  Hossein Alian Moghadam majid jabbari Saeed Daneshmand Saeid Rasouli Jazi Arezoo Khosravi
  10.30495/admt.2021.1923176.1251
  Needle graphite electrodes are one of the main parts used in electric arc furnaces. These electrodes have a significant impact on melt quality and product quality, and their consumption is one of the most important parameters of steel production cost in EAF furnaces. Th أکثر

  Needle graphite electrodes are one of the main parts used in electric arc furnaces. These electrodes have a significant impact on melt quality and product quality, and their consumption is one of the most important parameters of steel production cost in EAF furnaces. Therefore, reducing the consumption of needle graphite electrodes in these furnaces is very important. The main reasons for continuous use of needle graphite electrodes in arc furnaces are oxidation of the sidewalls and sublimation of their tips, and many solutions have been proposed to reduce them. In the present study, the effect of coating consisting of TiO2/SiC/SiO2 elements on the wear rate of the needle graphite electrode in the sublimation state is investigated using EDM (Electrical Discharge Machining- Spark device). For this purpose, the effect of voltage, current, pulse on time and pulse off time on the electrode wear rate are investigated and in this regard, Taguchi design method has been used to reduce the number of experiments. Based on the test results, TiO2/SiC/SiO2 coating reduces the wear rate of the needle graphite electrode due to sublimation. تفاصيل المقالة
• حرية الوصول المقاله
  • صفحة الملخص
  • نص كامل
  
  2 - Investigating the effect of graphite electrodes structures on the synthesized graphene using electrochemistry method
  Zahra Mehrvar Mohammad Ali Kiani Hani Sayahi
  In this study, a simple and efficient approach is reported to product graphene using electrochemical exfoliation of graphite electrodes, in acidic solutions. The electrolyte concentration, applied voltages, electrodes distance and preparation time were taken as control أکثر

  In this study, a simple and efficient approach is reported to product graphene using electrochemical exfoliation of graphite electrodes, in acidic solutions. The electrolyte concentration, applied voltages, electrodes distance and preparation time were taken as control parameters to optimize the produced graphene structures. The optimized graphene sample was prepared in a H2SO4 (0.5 M) at a bias of +10 V. The interlayer spaces, crystallite size and the average number of layers were determined by XRD. Surface morphology, layer thickness and characteristics of obtained samples were investigated by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and FTIR. The obtained results confirmed the graphene structures. تفاصيل المقالة