Machining of Makrana White Marble Surfaces by Abrasive Water Jet Machining
الموضوعات :Vishal Gupta 1 , M.P. Garg Garg 2 , N.K. Batra 3 , Arjun S. Wadwa 4
1 - Indian Institute of Technology Delhi, Delhi, India
2 - Mechanical Engineering Department, M. M. University, Mullana, India
3 - Mechanical Engineering Department, M. M. University, Mullana, India
4 - École de Technologie Supérieure, Montreal, Canada
الکلمات المفتاحية: Surface Roughness, Taguchi Method, AWJM, White Marble,
ملخص المقالة :
In the present study, experimental investigations were conducted to find out the effect of abrasive water jet machining (AWJM) process parameters on the surface roughness (Ra) of white Makrana Marble. The approach was based on Taguchi’s method and analysis of variance (ANOVA) to optimize the AWJM process parameters for effective machining. Nozzle transverse speed, water pressure, and stand of distance were selected as the input parameters while the other was kept constant. It was found that the water pressure and nozzle transverse speed were significant control factors and the stand of distance was the insignificant control factor in controlling the surface roughness (Ra).
[1] Domiaty, A. A., Shabara, M. A., Abdel-Rahman, A. A. and AI-Sabeeh, A. K. 1996. On the Modelling of Abrasive Waterjet Cutting. International Journal Advance Manufacturing Technology. 12: 255-265.
[2] Mazurkiewicz, M. 2000. A manufacturing tool for a new century. Journal of Materials Processing Technology 106:112-118.
[3] Akkurt, A., Kulekc¸i, M.K., Seker, U. and Ercan, F. 2004. Effect of feedrate on surface roughness in abrasive waterjet cutting applications. Journal of Materials Processing Technology. 147:389–396.
[4] Momber, A. and Kovacevic, R. 1998. Principles of Abrasive Waterjet Machining. Springer–Verlag, London.
[5] Hashish, M. 1991. Optimization factors in abrasive waterjet machining. Transact. ASME Journal of Engineering for Industry. 113: 29–37.
[6] Nalbant, M., G¨ okkaya, H. and Sur, G. 2007. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials & Design. 28: 1379–1385.
[7] Rahmah, A., Khan, A.A. and Ramulu, M. 2003. A study of abrasive waterjet machining of Kevlar composite. Proceedings of the 12th U.S. Water Jet Conference, 4-F.
[8] Schwetz, K.A., Sigl, L.S., Greim, J. and Knoch, H. 1995. Wear of boron carbide ceramics by abrasive waterjets. 10th International Conference on Wear of Materials. 181-183:148-155.
[9] Conner, I., Hashish, M. and Ramulu, M. 2003. Abrasive waterjet machining of aerospace structural sheet and thin plate materials. Proceedings of the 12th U.S. Water Jet Conference, 1-G.
[10] Wang, J., Wong and W.C.K. 1999. A study of abrasive water jet cutting of metallic coated sheet steels. International Journal of Machine Tools & Manufacture. 39: 855–870.
[11] Hocheng, H., Tsai, H.Y., Shiue, J.J. and Wang, B. 1997. Feasibility study of abrasive-waterjet milling of fibre-reinforced plastics. Journal of Manufacturing Science and Engineering. 119:133–142.
[12] Selvan, M., Chithirai Pon, R. and N. Sundara, M. 2012. Analysis of surface roughness in abrasive waterjet cutting of cast iron. International Journal of Science, Environment and Technology. 1:174-182.
[13] Wang, J. 1999. A machinability study of polymer matrix composites using abrasive water jet cutting technology. Journal of Materials Processing Technology. 94:30–35.
[14] Azmira, M.A., and Ahsan, A.K. 2009. A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology. 209:6168–6173.
