Temperature-dependent Vibration Analysis of Clamped-free Sandwich Beams with Porous FG Core
الموضوعات :
1 - Department of Mechanics, Tuyserkan Branch, Islamic Azad University, Tuyserkan, Iran
الکلمات المفتاحية: Porosity, Sandwich beam, FG Core, Temperature-dependent, Clamped-free,
ملخص المقالة :
In recent years, there has been a demand for the production of materials with high thermal resistance and manufacturing structures with high mechanical strength in modern industries. In this paper, the frequency responses analysis of the sandwich beams with functionally graded core and homogeneous face sheets are presented based on the high-order sandwich beam theory. All materials are temperature dependent and the properties of FGM are varied gradually by a power-law rule which is modified by considering even and uneven porosity distributions across the thickness. Nonlinear Lagrange strain and thermal stresses of the face sheets and in-plane strain and transverse flexibility of the core are considered. Governing equations of the motion are obtained based on Hamilton’s principle and solved by a Galerkin method for the clamped-free boundary condition. To verify the results of this study, they compared with special cases of the literature. Based on the numerical results, it is concluded that by increasing the temperature, power-law index, length, thickness, porosity volume fraction the fundamental frequency parameter decreases, and increasing the wave number causes the frequency increases.
[1] Vinson, J. 2018. The behavior of sandwich structures of isotropic and composite materials, TECHNOMIC, Pennsylvania.
[2] Rahmani, M., Mohammadi, Y. and Kakavand, F. 2019. Vibration analysis of sandwich truncated conical shells with porous FG face sheets in various thermal surroundings. Steel and Composite Structures. 32(2): 239-252.
[3] Frostig, Y., Baruch, M., Vilnay, O. and Sheinman, I. 1992. High-order theory for sandwich-beam behavior with transversely flexible core. Journal of Engineering Mechanics. 118(5): 1026-1043.
[4] Fazzolari, F. A. 2018. Generalized exponential, polynomial and trigonometric theories for vibration and stability analysis of porous FG sandwich beams resting on elastic foundations. Composites Part B: Engineering. 136:254-271.
[5] Chen, D., Kitipornchai, S. and Yang, J. 2016. Nonlinear free vibration of shear deformable sandwich beam with a functionally graded porous core. Thin-Walled Structures. 107:39-48.
[6] Akbaş, Ş. D. 2017. Thermal effects on the vibration of functionally graded deep beams with porosity. International Journal of Applied Mechanics. 9(05): 1750076.
[7] Bourada, F., Bousahla, A. A., Bourada, M., Azzaz, A., Zinata, A. and Tounsi, A. 2019. Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory. Wind and Structures. 28(1):19-30.
[8] Li, C., Shen, H. S. and Wang, H. 2019. Nonlinear vibration of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core. International Journal of Structural Stability and Dynamics. 19(03):1950034.
[9] Wu, H., Kitipornchai, S. and Yang, J. 2015. Free vibration and buckling analysis of sandwich beams with functionally graded carbon nanotube-reinforced composite face sheets. International Journal of Structural Stability and Dynamics. 15(07):1540011.
[10] Xu, G. D., Zeng, T., Cheng, S., Wang, X. H. and Zhang, K. 2019. Free vibration of composite sandwich beam with graded corrugated lattice core. Composite Structures. 229:111466.
[11] Li, M., Du, S., Li, F. and Jing, X. 2020. Vibration characteristics of novel multilayer sandwich beams: Modelling, analysis and experimental validations. Mechanical Systems and Signal Processing. 142:106799.
[12] Li, Y. H., Dong, Y. H., Qin, Y. and Lv, H. W. 2018. Nonlinear forced vibration and stability of an axially moving viscoelastic sandwich beam. International Journal of Mechanical Sciences. 138:131-145.
[13] Şimşek, M. and Al-Shujairi, M. 2017. Static, free and forced vibration of functionally graded (FG) sandwich beams excited by two successive moving harmonic loads. Composites Part B: Engineering. 108:18-34.
[14] Nguyen, T. K., Vo, T. P., Nguyen, B. D. and Lee, J. 2016. An analytical solution for buckling and vibration analysis of functionally graded sandwich beams using a quasi-3D shear deformation theory. Composite Structures. 156:238-252.
[15] Kahya, V. and Turan, M. 2018. Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element. Composites Part B: Engineering. 146:198-212.
[16] Tossapanon, P. and Wattanasakulpong, N. 2016. Stability and free vibration of functionally graded sandwich beams resting on two-parameter elastic foundation. Composite Structures. 142:215-225.
[17] Arikoglu, A. and Ozkol, I. 2010. Vibration analysis of composite sandwich beams with viscoelastic core by using differential transform method. Composite Structures. 92(12):3031-3039.
[18] Pradhan, S. C. and Murmu, T. 2009. Thermo-mechanical vibration of FGM sandwich beam under variable elastic foundations using differential quadrature method. Journal of Sound and Vibration. 321(1-2):342-362.
[19] Mashat, D. S., Carrera, E., Zenkour, A. M., Al Khateeb, S. A. and Filippi, M. 2014. Free vibration of FGM layered beams by various theories and finite elements. Composites Part B: Engineering. 59:269-278.
[20] Nguyen, T. K., Nguyen, T. T. P., Vo, T. P. and Thai, H. T. 2015. Vibration and buckling analysis of functionally graded sandwich beams by a new higher-order shear deformation theory. Composites Part B: Engineering. 76:273-285.
[21] Vo, T. P., Thai, H. T., Nguyen, T. K., Inam, F. and Lee, J. 2015. A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures. 119:1-12.
[22] Yang, Y., Lam, C. C., Kou, K. P. and Iu, V. P. 2014. Free vibration analysis of the functionally graded sandwich beams by a meshfree boundary-domain integral equation method. Composite Structures. 117:32-39.
[23] Mayandi, K. and Jeyaraj, P. 2015. Bending, buckling and free vibration characteristics of FG-CNT-reinforced polymer composite beam under non-uniform thermal load. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 229: 13-28.
[24] Mammano S.G. and Dragoni, E. 2017. Mechanical design of buckled beams for low-stiffness elastic suspensions: Theory and application. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 231: 140-150.
[25] Alijani, A., Darvizeh, M. and Darvizeh, A. 2015. Elasto-plastic pre-and post-buckling analysis of functionally graded beams under mechanical loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 229: 146-165.
[26] Majumdar, A. and Das, D. 2018. A study on thermal buckling load of clamped functionally graded beams under linear and nonlinear thermal gradient across thickness. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232: 769-784.
[27] Koissin, V., Shipsha, A., and Skvortsov, V. 2010. Effect of physical nonlinearity on local buckling in sandwich beams. Journal of Sandwich Structures & Materials.12: 477-494.
[28] Tran, T.T., Nguyen, N.H., Do, T.V., Minh,P.V. and Duc, N. D. 2019. Bending and thermal buckling of unsymmetric functionally graded sandwich beams in high-temperature environment based on a new third-order shear deformation theory. Journal of Sandwich Structures & Materials. 1099636219849268.
[29] Osofero, A.I., Vo, T.P., Nguyen, T-K. and Lee, J. 2016. Analytical solution for vibration and buckling of functionally graded sandwich beams using various quasi-3D theories. Journal of Sandwich Structures & Materials. 18: 3-29.
[30] Challamel, N. and Girhammar, U.A. 2011. Variationally-based theories for buckling of partial composite beam–columns including shear and axial effects. Engineering structures. 33: 2297-2319.
[31] Rahmani, M., Dehghanpour, S. and Barootiha, A. 2020. Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory. Journal of Modern Processes in Manufacturing and Production. 9(2): 57-71.
[32] Rahmani, M., Mohammadi, Y., Kakavand, F. and Raeisifard, H. 2020. Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings. Journal of Applied and Computational Mechanics. 6(3):416-432.
[33] Reddy, J.N. 2003. Mechanics of Laminated Composite Plates and Shells, Theory and Application. CRC Press, New York.
[34] Dariushi, S. and Sadighi, M. 2014. A new nonlinear high order theory for sandwich beams: An analytical and experimental investigation. Composite Structures. 108:779-788.
[35] Rahmani, M., Mohammadi, Y. and Kakavand, F. 2020. Buckling analysis of different types of porous fg conical sandwich shells in various thermal surroundings. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42(4):1-16.
[36] Rahmani, M. and Dehghanpour, S. 2021. Temperature-Dependent Vibration of Various Types of Sandwich Beams with Porous FGM Layers. International Journal of Structural Stability and Dynamics. 21(02):2150016.
[37] Mohammadi, Y. and Rahmani, M., 2020. Temperature-dependent buckling analysis of functionally graded sandwich cylinders. Journal of Solid Mechanics. 12(1):1-15.
[38] Rahmani M, Mohammadi Y. 2021. Vibration of two types of porous FG sandwich conical shell with different boundary conditions. Structural Engineering and Mechanics. 79(4):401-13.
[39] Şimşek, M. 2010. Fundamental frequency analysis of functionally graded beams by using different higher-order beam theories. Nuclear Engineering and Design. 240(4):697-705.
[40] Nguyen, T.K., Vo, T.P. and Thai, H.T. 2013. Static and free vibration of axially loaded functionally graded beams based on the first-order shear deformation theory. Composites Part B: Engineering. 55:147-157.
[41] Vo, T.P., Thai, H.T., Nguyen, T.K., Maheri, A. and Lee J. 2014. Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory. Engineering Structures. 64:12-22.
