Investigation and Application of Nanomaterials in Sustainable Architecture
الموضوعات : Journal of Nanoanalysis
1 - M.A. in Architectural Technology, College of Architecture, Faculty of Fine Arts, University of Tehran, Tehran, Iran
الکلمات المفتاحية: Nanotechnology, Nanomaterials, Sustainable Architecture,
ملخص المقالة :
The review article seeks to highlight current developments in the investigation of nanotechnology in sustainable architecture. Nanotechnologies play a important role in architectural design. In fact, building materials combined with nanotechnology and nano materials developed smaller, with work better than other materials. Some of the developments on the application of nanotechnology on sustainable architecture, comprises the improvement of the durability and strength properties of concrete; production of self-cleaning surface and glass and thermal and moisture nano-insulation. Any alteration at the nanoscopic level of concrete, ceramic, glass and surfaces and its constituent influences its behavior, including its strength, durability and self-cleaning characteristics. In fact, nanotechnology further influences architecture and design and even design ideas in the world by introducing new materials and how to use energy. Sustainable architecture can be achieved by using materials produced from nanotechnology correctly. The unforeseen consequences of the development of this significant technology should also be considered
المصادر:
[1]. Singh, P.K., G. Jairath, and S.S. Ahlawat, Nanotechnology: a future tool to improve quality and safety in meat industry. Journal of food science and technology, 2016. 53(4): p. 1739-1749.
[2]. Asha, A.B. and R. Narain, Chapter 15 - Nanomaterials properties, in Polymer Science and Nanotechnology, R. Narain, Editor. 2020, Elsevier. p. 343-359.
[3]. Hutchison, J., The Road to Sustainable Nanotechnology: Challenges, Progress and Opportunities. ACS Sustainable Chemistry & Engineering, 2016. 4.
[4]. Ahmadi, S., et al., Stimulus-responsive sequential release systems for drug and gene delivery. Nano Today, 2020. 34: p. 100914.
[5]. Sciau, P., Nanoparticles in Ancient Materials: The Metallic Lustre Decorations of Medieval Ceramics. 2012. p. 525-540.
[6]. Deng, Y., et al., Application of the Nano-Drug Delivery System in Treatment of Cardiovascular Diseases. Frontiers in Bioengineering and Biotechnology, 2020. 7(489).
[7]. Ahmadi, S., et al., Controlled Gene Delivery Systems: Nanomaterials and Chemical Approaches. J Biomed Nanotechnol, 2020. 16(5): p. 553-582.
[8]. Nasrollahzadeh, M., et al., Chapter 4 - Applications of Nanotechnology in Daily Life, in Interface Science and Technology, M. Nasrollahzadeh, et al., Editors. 2019, Elsevier. p. 113-143.
[9]. Ahmadi, S., et al., Thiol-Capped Gold Nanoparticle Biosensors for Rapid and Sensitive Visual Colorimetric Detection of Klebsiella pneumoniae. Journal of Fluorescence, 2018. 28(4): p. 987-998.
[10]. Abdin, A.R., A.R. El Bakery, and M.A. Mohamed, The role of nanotechnology in improving the efficiency of energy use with a special reference to glass treated with nanotechnology in office buildings. Ain Shams Engineering Journal, 2018. 9(4): p. 2671-2682.
[11]. Hossain, K. and S. Rameeja, Importance of Nanotechnology in Civil Engineering. European Journal of Sustainable Development, 2015. 4: p. 161-166.
[12]. Moreno, S.H. and S.C.S.d.l. Torre. Applications of Nanocomposites in Architecture and Construction. 2017.
[13]. Ngô, C. and M.H. Van de Voorde, Nanomaterials: Doing More with Less, in Nanotechnology in a Nutshell: From Simple to Complex Systems, C. Ngô and M. Van de Voorde, Editors. 2014, Atlantis Press: Paris. p. 55-70.
[14]. Khan, I., K. Saeed, and I. Khan, Nanoparticles: Properties, applications and toxicities. Arabian Journal of Chemistry, 2019. 12(7): p. 908-931.
[15]. Li, X. and J. Wang, One-dimensional and two-dimensional synergized nanostructures for high-performing energy storage and conversion. InfoMat, 2020. 2(1): p. 3-32.
[16]. Wang, Z., et al., Application of Zero-Dimensional Nanomaterials in Biosensing. Frontiers in Chemistry, 2020. 8(320).
[17]. Jiang, J., et al., Does Nanoparticle Activity Depend upon Size and Crystal Phase? Nanotoxicology, 2008. 2(1): p. 33-42.
[18]. Daveiga, J. and P. Ferreira, Smart and Nano materials in architecture. ACADIA 2005 Conference: Smart Architecture, 2005: p. 58-67.
[19]. Gu, H., et al., Biofunctional magnetic nanoparticles for protein separation and pathogen detection. Chemical Communications, 2006(9): p. 941-949.
[20]. Bashir, S. and J. Liu, Chapter 1 - Nanomaterials and Their Application, in Advanced Nanomaterials and their Applications in Renewable Energy, J.L. Liu and S. Bashir, Editors. 2015, Elsevier: Amsterdam. p. 1-50.
[21]. Jia, X. and F. Wei, Advances in Production and Applications of Carbon Nanotubes. Topics in Current Chemistry, 2017. 375(1): p. 18.
[22]. Sankar, D.P.A.G. and U. Kaithamalai, Mechanical and Electrical Properties of Single Walled Carbon Nanotubes: A Computational Study. European Journal of Scientific Research, 2011. 60: p. 1450-216.
[23]. Shah, K.W. and T. Xiong, Multifunctional Metallic Nanowires in Advanced Building Applications. Materials (Basel, Switzerland), 2019. 12(11): p. 1731.
[24]. Mei, L., et al., Two-dimensional nanomaterials beyond graphene for antibacterial applications: current progress and future perspectives. Theranostics, 2020. 10(2): p. 757-781.
[25]. Yang, F., et al., Recent progress in two-dimensional nanomaterials: Synthesis, engineering, and applications. FlatChem, 2019. 18: p. 100133.
[26]. Dahlan, A.S., Smart and Functional Materials Based Nanomaterials in Construction Styles in Nano-Architecture. Silicon, 2019. 11(4): p. 1949-1953.
[27]. Farag, A., Applications of nanomaterials in corrosion protection coatings and inhibitors. Corrosion Reviews, 2020. 38.
[28]. Yousaf, S., et al., Chapter 16 - Nanocoatings in medicine: Antiquity and modern times, in Emerging Nanotechnologies for Manufacturing (Second Edition), W. Ahmed and M.J. Jackson, Editors. 2015, William Andrew Publishing: Boston. p. 418-443.
[29]. Babu, V.J., et al., Review of one-dimensional and two-dimensional nanostructured materials for hydrogen generation. Physical Chemistry Chemical Physics, 2015. 17(5): p. 2960-2986.
[30]. Hamidi, F. and F. Aslani, TiO(2)-based Photocatalytic Cementitious Composites: Materials, Properties, Influential Parameters, and Assessment Techniques. Nanomaterials (Basel, Switzerland), 2019. 9(10): p. 1444.
[31]. Majumder, S., et al., ZnO based nanomaterials for photocatalytic degradation of aqueous pharmaceutical waste solutions – A contemporary review. Environmental Nanotechnology, Monitoring & Management, 2020. 14: p. 100386.
[32]. Mateo, D., et al., The mechanism of photocatalytic CO2 reduction by graphene-supported Cu2O probed by sacrificial electron donors. Photochemical & Photobiological Sciences, 2018. 17(6): p. 829-834.
[33]. Anjali Acharya and V.A. Gokhale, Titanium: A New Generation Material for Architectural
[34]. Applications. Anjali Acharya Int. Journal of Engineering Research and Applications, 2015. 5(2): p. 22-29.
[35]. Goffredo, G.B., et al., TiO2 nanocoatings fOr Architectural Heritage: Self-Cleaning Treatments On Historical Stone Surfaces. Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanoengineering and Nanosystems, 2014. 228: p. 2-10.
[36]. Mansour, A.M.H. and S.K. Al-Dawery, Sustainable self-cleaning treatments for architectural facades in developing countries. Alexandria Engineering Journal, 2018. 57(2): p. 867-873.
[37]. Valenzuela, L., et al., Antimicrobial surfaces with self-cleaning properties functionalized by photocatalytic ZnO electrosprayed coatings. Journal of Hazardous Materials, 2019. 369: p. 665-673.
[38]. Stieberova, B., et al., Application of ZnO Nanoparticles in a Self-cleaning Coating on a Metal Panel: An Assessment of Environmental Benefits. ACS Sustainable Chemistry & Engineering, 2017. 5(3): p. 2493-2500.
[39]. Hikku, G.S., et al., Alkyd resin based hydrophilic self-cleaning surface with self-refreshing behaviour as single step durable coating. Journal of Colloid and Interface Science, 2018. 531: p. 628-641.
[40]. Querido, M.M., et al., Self-disinfecting surfaces and infection control. Colloids and surfaces. B, Biointerfaces, 2019. 178: p. 8-21.
[41]. Shah, K.W. and G.F. Huseien, Inorganic nanomaterials for fighting surface and airborne pathogens and viruses. Nano Express, 2020. 1(3): p. 032003.
[42]. Naseem, T. and T. Durrani, The role of some important metal oxide nanoparticles for wastewater and antibacterial applications: A review. Environmental Chemistry and Ecotoxicology, 2021. 3: p. 59-75.
[43]. Jalvo, B., et al., Antimicrobial and antibiofilm efficacy of self-cleaning surfaces functionalized by TiO2 photocatalytic nanoparticles against Staphylococcus aureus and Pseudomonas putida. Journal of Hazardous Materials, 2017. 340: p. 160-170.
[44]. Park, K.-H., et al., Antibacterial activity of the thin ZnO film formed by atomic layer deposition under UV-A light. Chemical Engineering Journal, 2017. 328: p. 988-996.
[45]. Schifano, E., et al., Antibacterial Effect of Zinc Oxide-Based Nanomaterials on Environmental Biodeteriogens Affecting Historical Buildings. Nanomaterials, 2020. 10: p. 335.
[46]. Franci, G., et al., Silver Nanoparticles as Potential Antibacterial Agents. Molecules, 2015. 20: p. 8856-8874.
[47]. Wang, J., et al., Silver-nanoparticles-modified biomaterial surface resistant to staphylococcus: new insight into the antimicrobial action of silver. Scientific Reports, 2016. 6(1): p. 32699. Gurunathan, S., et al., Enhanced antibacterial and anti-biofilm activities of silver nanoparticles against Gram-negative and Gram-positive bacteria. Nanoscale Res Lett, 2014. 9(1): p. 373.
[48]. Xie, Y., et al., Antibacterial Activity and Mechanism of Action of Zinc Oxide Nanoparticles against <em>Campylobacter jejuni</em>. Applied and Environmental Microbiology, 2011. 77(7): p. 2325.
[49]. Yadav, N., et al., Graphene Oxide-Coated Surface: Inhibition of Bacterial Biofilm Formation due to Specific Surface–Interface Interactions. ACS Omega, 2017. 2(7): p. 3070-3082.
[50]. Shakibaie, M., et al., Anti-biofilm activity of biogenic selenium nanoparticles and selenium dioxide against clinical isolates of Staphylococcus aureus, Pseudomonas aeruginosa, and Proteus mirabilis. J Trace Elem Med Biol, 2015. 29: p. 235-41.
[51]. Mohamed, M.M., et al., Antibacterial effect of gold nanoparticles against Corynebacterium pseudotuberculosis. International Journal of Veterinary Science and Medicine, 2017. 5(1): p. 23-29.
[52]. Ortiz-Benítez, E.A., et al., Antibacterial mechanism of gold nanoparticles on Streptococcus pneumoniae. Metallomics, 2019. 11(7): p. 1265-1276.
[53]. Casini, M., Nano insulating materials and energy retrofit of buildings. AIP Conference Proceedings, 2016. 1749(1): p. 020005.
[54]. Rostam, N.G., M.J. Mahdavinejad, and M.G. Rostam, Commercializing Usage of Nano-insulating Materials in Building Industry and Future Architecture. Procedia Materials Science, 2015. 11: p. 644-648.
[55]. Gao, T., et al., Nano Insulation Materials for Energy Efficient Buildings: From Theory to Practice. 2012.
[56]. Riffat, S.B. and G. Qiu, A review of state-of-the-art aerogel applications in buildings. International Journal of Low-Carbon Technologies, 2013. 8(1): p. 1-6.
[57]. Olar, R. NANOMATERIALS AND NANOTECHNOLOGIES FOR CIVIL ENGINEERING. 2012.
[58]. Kırgız, M.S., Green cement composite concept reinforced by graphite nano-engineered particle suspension for infrastructure renewal material. Composites Part B: Engineering, 2018. 154: p. 423-429.
[59]. Kirgiz, M.S., Advance treatment by nanographite for Portland pulverised fly ash cement (the class F) systems. Composites Part B: Engineering, 2015. 82: p. 59-71.
[60]. Cho, H.-B., et al., Insulating polymer nanocomposites with high-thermal-conduction routes via linear densely packed boron nitride nanosheets. Composites Science and Technology, 2016. 129: p. 205-213.
[61]. Azizi, N. and K. Yusoh, The Application of Thermal Building Nano-Insulation Materials Based on the Diffusivity Characteristic of Polyurethane Nanocomposite. International Journal of Chemical Engineering and Applications, 2014. 5(69-72).
[62]. Al Marri, M.G., et al., Date pits based nanomaterials for thermal insulation applications-Towards energy efficient buildings in Qatar. PLoS One, 2021. 16(3): p. e0247608.
[63]. Ali, R.A. and O.H. Kharofa, The impact of nanomaterials on sustainable architectural applications smart concrete as a model. Materials Today: Proceedings, 2021. 42: p. 3010-3017.
[64]. Norhasri, M.S.M., M.S. Hamidah, and A.M. Fadzil, Applications of using nano material in concrete: A review. Construction and Building Materials, 2017. 133: p. 91-97.
[65]. Olafusi, O.S., et al., Application of nanotechnology in concrete and supplementary cementitious materials: a review for sustainable construction. SN Applied Sciences, 2019. 1(6): p. 580.
[66]. Spiesz, P. and H.J.H. Brouwers, Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, 2014. 65: p. 140–150.
[67]. Adak, D., M. Sarkar, and S. Mandal, Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Construction and Building Materials, 2014. 70: p. 453-459.
[68]. Massa, M.A., et al., Synthesis of new antibacterial composite coating for titanium based on highly ordered nanoporous silica and silver nanoparticles. Mater Sci Eng C Mater Biol Appl, 2014. 45: p. 146-53.
[69]. Qing, Y., et al., Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume. Construction and Building Materials, 2007. 21(3): p. 539-545.
[70]. Quercia, G., G. Hüsken, and H.J.H. Brouwers, Water demand of amorphous nano silica and its impact on the workability of cement paste. Cement and Concrete Research, 2012. 42(2): p. 344-357.
[71]. Du, M., et al., Carbon nanomaterials enhanced cement-based composites: advances and challenges. Nanotechnology Reviews, 2020. 9: p. 115-135.
[72]. Du, M.R., et al., Role of Multiwalled Carbon Nanotubes as Shear Reinforcing Nanopins in Quasi-Brittle Matrices. ACS Applied Nano Materials, 2018. 1(4): p. 1731-1740.
[73]. Rostamiyan, Y., et al., Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite. Composites Part B: Engineering, 2015. 69: p. 304-316.
[74]. Morsy, M.S., S.H. Alsayed, and M. Aqel, Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar. Construction and Building Materials, 2011. 25(1): p. 145-149.
[75]. Hassan, A., H. Elkady, and I.G. Shaaban, Effect of Adding Carbon Nanotubes on Corrosion Rates and Steel-Concrete Bond. Scientific Reports, 2019. 9(1): p. 6285.
[76]. Pietrzak, A., J. Adamus, and B. Langier, Application of Titanium Dioxide in Cement and Concrete Technology. Key Engineering Materials, 2016. 687: p. 243-249.
[77]. Chen, J. and C.-s. Poon, Photocatalytic construction and building materials: From fundamentals to applications. Building and Environment, 2009. 44(9): p. 1899-1906.
[78]. Yu, X., S. Kang, and X. Long, Compressive strength of concrete reinforced by TiO2 nanoparticles. AIP Conference Proceedings, 2018. 2036(1): p. 030006.
[1]. Singh, P.K., G. Jairath, and S.S. Ahlawat, Nanotechnology: a future tool to improve quality and safety in meat industry. Journal of food science and technology, 2016. 53(4): p. 1739-1749.
[2]. Asha, A.B. and R. Narain, Chapter 15 - Nanomaterials properties, in Polymer Science and Nanotechnology, R. Narain, Editor. 2020, Elsevier. p. 343-359.
[3]. Hutchison, J., The Road to Sustainable Nanotechnology: Challenges, Progress and Opportunities. ACS Sustainable Chemistry & Engineering, 2016. 4.
[4]. Ahmadi, S., et al., Stimulus-responsive sequential release systems for drug and gene delivery. Nano Today, 2020. 34: p. 100914.
[5]. Sciau, P., Nanoparticles in Ancient Materials: The Metallic Lustre Decorations of Medieval Ceramics. 2012. p. 525-540.
[6]. Deng, Y., et al., Application of the Nano-Drug Delivery System in Treatment of Cardiovascular Diseases. Frontiers in Bioengineering and Biotechnology, 2020. 7(489).
[7]. Ahmadi, S., et al., Controlled Gene Delivery Systems: Nanomaterials and Chemical Approaches. J Biomed Nanotechnol, 2020. 16(5): p. 553-582.
[8]. Nasrollahzadeh, M., et al., Chapter 4 - Applications of Nanotechnology in Daily Life, in Interface Science and Technology, M. Nasrollahzadeh, et al., Editors. 2019, Elsevier. p. 113-143.
[9]. Ahmadi, S., et al., Thiol-Capped Gold Nanoparticle Biosensors for Rapid and Sensitive Visual Colorimetric Detection of Klebsiella pneumoniae. Journal of Fluorescence, 2018. 28(4): p. 987-998.
[10]. Abdin, A.R., A.R. El Bakery, and M.A. Mohamed, The role of nanotechnology in improving the efficiency of energy use with a special reference to glass treated with nanotechnology in office buildings. Ain Shams Engineering Journal, 2018. 9(4): p. 2671-2682.
[11]. Hossain, K. and S. Rameeja, Importance of Nanotechnology in Civil Engineering. European Journal of Sustainable Development, 2015. 4: p. 161-166.
[12]. Moreno, S.H. and S.C.S.d.l. Torre. Applications of Nanocomposites in Architecture and Construction. 2017.
[13]. Ngô, C. and M.H. Van de Voorde, Nanomaterials: Doing More with Less, in Nanotechnology in a Nutshell: From Simple to Complex Systems, C. Ngô and M. Van de Voorde, Editors. 2014, Atlantis Press: Paris. p. 55-70.
[14]. Khan, I., K. Saeed, and I. Khan, Nanoparticles: Properties, applications and toxicities. Arabian Journal of Chemistry, 2019. 12(7): p. 908-931.
[15]. Li, X. and J. Wang, One-dimensional and two-dimensional synergized nanostructures for high-performing energy storage and conversion. InfoMat, 2020. 2(1): p. 3-32.
[16]. Wang, Z., et al., Application of Zero-Dimensional Nanomaterials in Biosensing. Frontiers in Chemistry, 2020. 8(320).
[17]. Jiang, J., et al., Does Nanoparticle Activity Depend upon Size and Crystal Phase? Nanotoxicology, 2008. 2(1): p. 33-42.
[18]. Daveiga, J. and P. Ferreira, Smart and Nano materials in architecture. ACADIA 2005 Conference: Smart Architecture, 2005: p. 58-67.
[19]. Gu, H., et al., Biofunctional magnetic nanoparticles for protein separation and pathogen detection. Chemical Communications, 2006(9): p. 941-949.
[20]. Bashir, S. and J. Liu, Chapter 1 - Nanomaterials and Their Application, in Advanced Nanomaterials and their Applications in Renewable Energy, J.L. Liu and S. Bashir, Editors. 2015, Elsevier: Amsterdam. p. 1-50.
[21]. Jia, X. and F. Wei, Advances in Production and Applications of Carbon Nanotubes. Topics in Current Chemistry, 2017. 375(1): p. 18.
[22]. Sankar, D.P.A.G. and U. Kaithamalai, Mechanical and Electrical Properties of Single Walled Carbon Nanotubes: A Computational Study. European Journal of Scientific Research, 2011. 60: p. 1450-216.
[23]. Shah, K.W. and T. Xiong, Multifunctional Metallic Nanowires in Advanced Building Applications. Materials (Basel, Switzerland), 2019. 12(11): p. 1731.
[24]. Mei, L., et al., Two-dimensional nanomaterials beyond graphene for antibacterial applications: current progress and future perspectives. Theranostics, 2020. 10(2): p. 757-781.
[25]. Yang, F., et al., Recent progress in two-dimensional nanomaterials: Synthesis, engineering, and applications. FlatChem, 2019. 18: p. 100133.
[26]. Dahlan, A.S., Smart and Functional Materials Based Nanomaterials in Construction Styles in Nano-Architecture. Silicon, 2019. 11(4): p. 1949-1953.
[27]. Farag, A., Applications of nanomaterials in corrosion protection coatings and inhibitors. Corrosion Reviews, 2020. 38.
[28]. Yousaf, S., et al., Chapter 16 - Nanocoatings in medicine: Antiquity and modern times, in Emerging Nanotechnologies for Manufacturing (Second Edition), W. Ahmed and M.J. Jackson, Editors. 2015, William Andrew Publishing: Boston. p. 418-443.
[29]. Babu, V.J., et al., Review of one-dimensional and two-dimensional nanostructured materials for hydrogen generation. Physical Chemistry Chemical Physics, 2015. 17(5): p. 2960-2986.
[30]. Hamidi, F. and F. Aslani, TiO(2)-based Photocatalytic Cementitious Composites: Materials, Properties, Influential Parameters, and Assessment Techniques. Nanomaterials (Basel, Switzerland), 2019. 9(10): p. 1444.
[31]. Majumder, S., et al., ZnO based nanomaterials for photocatalytic degradation of aqueous pharmaceutical waste solutions – A contemporary review. Environmental Nanotechnology, Monitoring & Management, 2020. 14: p. 100386.
[32]. Mateo, D., et al., The mechanism of photocatalytic CO2 reduction by graphene-supported Cu2O probed by sacrificial electron donors. Photochemical & Photobiological Sciences, 2018. 17(6): p. 829-834.
[33]. Anjali Acharya and V.A. Gokhale, Titanium: A New Generation Material for Architectural
[34]. Applications. Anjali Acharya Int. Journal of Engineering Research and Applications, 2015. 5(2): p. 22-29.
[35]. Goffredo, G.B., et al., TiO2 nanocoatings fOr Architectural Heritage: Self-Cleaning Treatments On Historical Stone Surfaces. Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanoengineering and Nanosystems, 2014. 228: p. 2-10.
[36]. Mansour, A.M.H. and S.K. Al-Dawery, Sustainable self-cleaning treatments for architectural facades in developing countries. Alexandria Engineering Journal, 2018. 57(2): p. 867-873.
[37]. Valenzuela, L., et al., Antimicrobial surfaces with self-cleaning properties functionalized by photocatalytic ZnO electrosprayed coatings. Journal of Hazardous Materials, 2019. 369: p. 665-673.
[38]. Stieberova, B., et al., Application of ZnO Nanoparticles in a Self-cleaning Coating on a Metal Panel: An Assessment of Environmental Benefits. ACS Sustainable Chemistry & Engineering, 2017. 5(3): p. 2493-2500.
[39]. Hikku, G.S., et al., Alkyd resin based hydrophilic self-cleaning surface with self-refreshing behaviour as single step durable coating. Journal of Colloid and Interface Science, 2018. 531: p. 628-641.
[40]. Querido, M.M., et al., Self-disinfecting surfaces and infection control. Colloids and surfaces. B, Biointerfaces, 2019. 178: p. 8-21.
[41]. Shah, K.W. and G.F. Huseien, Inorganic nanomaterials for fighting surface and airborne pathogens and viruses. Nano Express, 2020. 1(3): p. 032003.
[42]. Naseem, T. and T. Durrani, The role of some important metal oxide nanoparticles for wastewater and antibacterial applications: A review. Environmental Chemistry and Ecotoxicology, 2021. 3: p. 59-75.
[43]. Jalvo, B., et al., Antimicrobial and antibiofilm efficacy of self-cleaning surfaces functionalized by TiO2 photocatalytic nanoparticles against Staphylococcus aureus and Pseudomonas putida. Journal of Hazardous Materials, 2017. 340: p. 160-170.
[44]. Park, K.-H., et al., Antibacterial activity of the thin ZnO film formed by atomic layer deposition under UV-A light. Chemical Engineering Journal, 2017. 328: p. 988-996.
[45]. Schifano, E., et al., Antibacterial Effect of Zinc Oxide-Based Nanomaterials on Environmental Biodeteriogens Affecting Historical Buildings. Nanomaterials, 2020. 10: p. 335.
[46]. Franci, G., et al., Silver Nanoparticles as Potential Antibacterial Agents. Molecules, 2015. 20: p. 8856-8874.
[47]. Wang, J., et al., Silver-nanoparticles-modified biomaterial surface resistant to staphylococcus: new insight into the antimicrobial action of silver. Scientific Reports, 2016. 6(1): p. 32699. Gurunathan, S., et al., Enhanced antibacterial and anti-biofilm activities of silver nanoparticles against Gram-negative and Gram-positive bacteria. Nanoscale Res Lett, 2014. 9(1): p. 373.
[48]. Xie, Y., et al., Antibacterial Activity and Mechanism of Action of Zinc Oxide Nanoparticles against <em>Campylobacter jejuni</em>. Applied and Environmental Microbiology, 2011. 77(7): p. 2325.
[49]. Yadav, N., et al., Graphene Oxide-Coated Surface: Inhibition of Bacterial Biofilm Formation due to Specific Surface–Interface Interactions. ACS Omega, 2017. 2(7): p. 3070-3082.
[50]. Shakibaie, M., et al., Anti-biofilm activity of biogenic selenium nanoparticles and selenium dioxide against clinical isolates of Staphylococcus aureus, Pseudomonas aeruginosa, and Proteus mirabilis. J Trace Elem Med Biol, 2015. 29: p. 235-41.
[51]. Mohamed, M.M., et al., Antibacterial effect of gold nanoparticles against Corynebacterium pseudotuberculosis. International Journal of Veterinary Science and Medicine, 2017. 5(1): p. 23-29.
[52]. Ortiz-Benítez, E.A., et al., Antibacterial mechanism of gold nanoparticles on Streptococcus pneumoniae. Metallomics, 2019. 11(7): p. 1265-1276.
[53]. Casini, M., Nano insulating materials and energy retrofit of buildings. AIP Conference Proceedings, 2016. 1749(1): p. 020005.
[54]. Rostam, N.G., M.J. Mahdavinejad, and M.G. Rostam, Commercializing Usage of Nano-insulating Materials in Building Industry and Future Architecture. Procedia Materials Science, 2015. 11: p. 644-648.
[55]. Gao, T., et al., Nano Insulation Materials for Energy Efficient Buildings: From Theory to Practice. 2012.
[56]. Riffat, S.B. and G. Qiu, A review of state-of-the-art aerogel applications in buildings. International Journal of Low-Carbon Technologies, 2013. 8(1): p. 1-6.
[57]. Olar, R. NANOMATERIALS AND NANOTECHNOLOGIES FOR CIVIL ENGINEERING. 2012.
[58]. Kırgız, M.S., Green cement composite concept reinforced by graphite nano-engineered particle suspension for infrastructure renewal material. Composites Part B: Engineering, 2018. 154: p. 423-429.
[59]. Kirgiz, M.S., Advance treatment by nanographite for Portland pulverised fly ash cement (the class F) systems. Composites Part B: Engineering, 2015. 82: p. 59-71.
[60]. Cho, H.-B., et al., Insulating polymer nanocomposites with high-thermal-conduction routes via linear densely packed boron nitride nanosheets. Composites Science and Technology, 2016. 129: p. 205-213.
[61]. Azizi, N. and K. Yusoh, The Application of Thermal Building Nano-Insulation Materials Based on the Diffusivity Characteristic of Polyurethane Nanocomposite. International Journal of Chemical Engineering and Applications, 2014. 5(69-72).
[62]. Al Marri, M.G., et al., Date pits based nanomaterials for thermal insulation applications-Towards energy efficient buildings in Qatar. PLoS One, 2021. 16(3): p. e0247608.
[63]. Ali, R.A. and O.H. Kharofa, The impact of nanomaterials on sustainable architectural applications smart concrete as a model. Materials Today: Proceedings, 2021. 42: p. 3010-3017.
[64]. Norhasri, M.S.M., M.S. Hamidah, and A.M. Fadzil, Applications of using nano material in concrete: A review. Construction and Building Materials, 2017. 133: p. 91-97.
[65]. Olafusi, O.S., et al., Application of nanotechnology in concrete and supplementary cementitious materials: a review for sustainable construction. SN Applied Sciences, 2019. 1(6): p. 580.
[66]. Spiesz, P. and H.J.H. Brouwers, Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, 2014. 65: p. 140–150.
[67]. Adak, D., M. Sarkar, and S. Mandal, Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Construction and Building Materials, 2014. 70: p. 453-459.
[68]. Massa, M.A., et al., Synthesis of new antibacterial composite coating for titanium based on highly ordered nanoporous silica and silver nanoparticles. Mater Sci Eng C Mater Biol Appl, 2014. 45: p. 146-53.
[69]. Qing, Y., et al., Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume. Construction and Building Materials, 2007. 21(3): p. 539-545.
[70]. Quercia, G., G. Hüsken, and H.J.H. Brouwers, Water demand of amorphous nano silica and its impact on the workability of cement paste. Cement and Concrete Research, 2012. 42(2): p. 344-357.
[71]. Du, M., et al., Carbon nanomaterials enhanced cement-based composites: advances and challenges. Nanotechnology Reviews, 2020. 9: p. 115-135.
[72]. Du, M.R., et al., Role of Multiwalled Carbon Nanotubes as Shear Reinforcing Nanopins in Quasi-Brittle Matrices. ACS Applied Nano Materials, 2018. 1(4): p. 1731-1740.
[73]. Rostamiyan, Y., et al., Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite. Composites Part B: Engineering, 2015. 69: p. 304-316.
[74]. Morsy, M.S., S.H. Alsayed, and M. Aqel, Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar. Construction and Building Materials, 2011. 25(1): p. 145-149.
[75]. Hassan, A., H. Elkady, and I.G. Shaaban, Effect of Adding Carbon Nanotubes on Corrosion Rates and Steel-Concrete Bond. Scientific Reports, 2019. 9(1): p. 6285.
[76]. Pietrzak, A., J. Adamus, and B. Langier, Application of Titanium Dioxide in Cement and Concrete Technology. Key Engineering Materials, 2016. 687: p. 243-249.
[77]. Chen, J. and C.-s. Poon, Photocatalytic construction and building materials: From fundamentals to applications. Building and Environment, 2009. 44(9): p. 1899-1906.
[78]. Yu, X., S. Kang, and X. Long, Compressive strength of concrete reinforced by TiO2 nanoparticles. AIP Conference Proceedings, 2018. 2036(1): p. 030006.
