The liquid environment effect on photoluminescence properties of carbon nanoparticles prepared by laser ablation method in liquids with possible biocompatibility applications
الموضوعات :Rasoul Malekfar 1 , Samad Moemen Bellah 2 , Fatemeh Kazemizadeh 3
1 - Department of Physics, Faculty of Basic Sciences, Tarbiat Modares University, Tehran, I.R. Iran
2 - Department of Physics, Faculty of Basic Sciences, Tarbiat Modares University, Tehran, I.R. Iran
3 - Department of Physics, Faculty if basic Sciences, Tarbiat Modares University, Tehran, I.R. Iran.
الکلمات المفتاحية: Biocompatibility, Photoluminescence, fluorescent, carbon nanoparticle, laser ablation in liquids,
ملخص المقالة :
Fluorescent carbon nanoparticles (CNPs) were prepared by nanosecond laser ablation of graphite powder in liquid. The effect of the liquid medium on photoluminescence (PL) efficiency and wavelength range were studied experimentally. Four solvents, polyethylene glycol, diethanolamine, diethylamine, and ethylenediamine were used as liquid platforms in the synthesis process. Analyzing the chemical components and optical spectral characterization of CNPs was carried out by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy and photoluminescence (PL) spectroscopy, respectively. Moreover, the size of CNPs was estimated by using dynamic light scattering (DLS) measurements. Liquid components are determined to be a key factor affecting PL properties and nanoparticle size. The results are valuable in practical applications.
[1] H. Li, Z. Kang, Y. Liu, and S.-T. Lee, "Carbon nanodots: synthesis, properties and applications," J. Mater. Chem, vol. 22, pp. 24230 (1-24), 2012.
[2] P. Namdari, B. Negahdari, and A. Eatemadi, "Synthesis, properties and biomedical applications of carbon-based quantum dots: An updated review," Biomedicine & Pharmacotherapy, vol. 87, pp. 209-222, 2017.
[3] R. Wang, K.-Q. Lu, Z.-R. Tang, and Y.-J. Xu, "Recent progress in carbon quantum dots: synthesis, properties and applications in photocatalysis," Journal of Materials Chemistry A, vol. 5, pp. 3717-3734, 2017.
[4] S. Y. Lim, W. Shen, and Z. Gao, "Carbon quantum dots and their applications," Chemical Society Reviews, vol. 44, pp. 362-381, 2015.
[5] D. L. Zhao and T.-S. Chung, "Applications of carbon quantum dots (CQDs) in membrane technologies: A review," Water research, vol. 147, pp. 43-49, 2018.
[6] R. Das, R. Bandyopadhyay, and P. Pramanik, "Carbon quantum dots from natural resource: A review," Materials today chemistry, vol. 8, pp. 96-109, 2018.
[7] J. Deng, Q. Lu, N. Mi, H. Li, M. Liu, M. Xu, L. Tan, Q. Xie, Y. Zhang, and Sh. Yao, "Electrochemical synthesis of carbon nanodots directly from alcohols," Chemistry–A European Journal, vol. 20, pp. 4993-4999, 2014.
[8] M. Liu, Y. Xu, F. Niu, J. J. Gooding, and J. Liu, "Carbon quantum dots directly generated from electrochemical oxidation of graphite electrodes in alkaline alcohols and the applications for specific ferric ion detection and cell imaging," Analyst, vol. 141, pp. 2657-2664, 2016.
[9] H. Ming, Z. Ma, Y. Liu, K. Pan, H. Yu, F. Wang, Z. Kang, "Large scale electrochemical synthesis of high quality carbon nanodots and their photocatalytic property," Dalton Transactions, vol. 41, pp. 9526-9531, 2012.
[10] J. Lu, J.-x. Yang, J. Wang, A. Lim, S. Wang, and K. P. Loh, "One-pot synthesis of fluorescent carbon nanoribbons, nanoparticles, and graphene by the exfoliation of graphite in ionic liquids," ACS nano, vol. 3, pp. 2367-2375, 2009.
[11] P. Saheeda, K. Sabira, J. Joseph, and S. Jayaleksmi, "Green chemistry route to realize, high quantum yield carbon quantum dots for cellular imaging applications," Materials Research Express, vol. 6, pp. 075025 (1-10), 2019.
[12] A. Sidorov, V. Lebedev, A. Kobranova, and A. Nashekin, "Formation of carbon quantum dots and nanodiamonds in laser ablation of a carbon film," Quantum Electronics, vol. 48, pp. 45-48, 2018.
[13] F. Kazemizadeh, R. Malekfar, and P. Parvin, "Pulsed laser ablation synthesis of carbon nanoparticles in vacuum," J. Phys. Chem. Solids, vol. 104, pp. 252-256, 2017.
[14] Y. Suda, T. Ono, M. Akazawa, Y. Sakai, J. Tsujino, and N. Homma, "Preparation of carbon nanoparticles by plasma-assisted pulsed laser deposition method—size and binding energy dependence on ambient gas pressure and plasma condition," Thin Solid Films, vol. 415, pp. 15-20, 2002.
[15] X. Li, H. Wang, Y. Shimizu, A. Pyatenko, K. Kawaguchi, and N. Koshizaki, "Preparation of carbon quantum dots with tunable photoluminescence by rapid laser passivation in ordinary organic solvents," Chem. Commun. vol. 47, pp. 932-4, Jan 21 2011.
[16] S.-L. Hu, K.-Y. Niu, J. Sun, J. Yang, N.-Q. Zhao, and X.-W. Du, "One-step synthesis of fluorescent carbon nanoparticles by laser irradiation," J. Mater. Chem. vol. 19, pp. 484-488, 2009.
[17] S. Hu, J. Liu, J. Yang, Y. Wang, and S. Cao, "Laser synthesis and size tailor of carbon quantum dots," J. Nanopart. Res., vol. 13, pp. 7247-7252, 2011.
[18] S. Hu, Y. Guo, Y. Dong, J. Yang, J. Liu, and S. Cao, "Understanding the effects of the structures on the energy gaps in carbon nanoparticles from laser synthesis," Journal of Materials Chemistry, vol. 22, pp. 12053-12057, 2012.
[19] S. Hu, Y. Guo, W. Liu, P. Bai, J. Sun, and S. Cao, "Controllable synthesis and Photoluminescence (PL) of amorphous and crystalline carbon nanoparticles," Journal of Physics and Chemistry of Solids, vol. 72, pp. 749-754, 2011.
[20] S. Hu, Y. Dong, J. Yang, J. Liu, and S. Cao, "Simultaneous synthesis of luminescent carbon nanoparticles and carbon nanocages by laser ablation of carbon black suspension and their optical limiting properties," Journal of Materials Chemistry, vol. 22, pp. 1957-1961, 2012.
[21] H. P. S. Castro, V. S. Souza, J. D. Scholten, J. H. Dias, J. A. Fernandes, F. S. Rodembusch, R. dos Reis, J. Dupont, S. R. Teixeira, and R. R. B. Correia, "Synthesis and characterisation of fluorescent carbon nanodots produced in ionic liquids by laser ablation," Chemistry–A European Journal, vol. 22, pp. 138-143, 2016.
[22] V. Nguyen, L. Yan, J. Si, and X. Hou, "Femtosecond laser-induced size reduction of carbon nanodots in solution: Effect of laser fluence, spot size, and irradiation time," Journal of Applied Physics, vol. 117, pp. 084304 (1-6), 2015.
[23] D. Tan, Y. Yamada, S. Zhou, Y. Shimotsuma, K. Miura, and J. Qiu, "Carbon nanodots with strong nonlinear optical response," Carbon, vol. 69, pp. 638-640, 2014.
[24] V. Nguyen, J. Si, L. Yan, and X. Hou, "Direct demonstration of photoluminescence originated from surface functional groups in carbon nanodots," Carbon, vol. 108, pp. 268-273, 2016.
[25] H. Asano, S. Muraki, H. Endo, S. Bandow, and S. Iijima, "Strong magnetism observed in carbon nanoparticles produced by the laser vaporization of a carbon pellet in hydrogen-containing Ar balance gas," J. Phys.: Condens. Matter, vol. 22, pp. 334209, 2010.
[26] H. Baweja and K. Jeet, "Economical and green synthesis of graphene and carbon quantum dots from agricultural waste," Materials Research Express, 2019.
[27] Y.-P. Sun, B. Zhou, Y. Lin, W. Wang, K. A. Shiral Fernando, P. Pathak, M. J. Meziani, B. A. Harruff, X. Wang, H. Wang, P. G. Luo, H. Yang, M. E. Kose, B. Chen, L. M. Veca, S.-Y. Xie, "Quantum-sized carbon dots for bright and colorful photoluminescence," J. Am. Chem. Soc., vol. 128, pp. 7756-7757, 2006.
[28] L. Cao, X. Wang, M. J. Meziani, F. Lu, H. Wang, P. G. Luo, Y. Lin, B. A. Harruff, L. M. Veca, D. Murray, S.-Y. Xie, and Y.-P. Sun, "Carbon dots for multiphoton bioimaging," J. Am. Chem. Soc. vol. 129, pp. 11318-11319, 2007.
[29] Y.-P. Sun, X. Wang, F. Lu, L. Cao, M. J. Meziani, P. G. Luo, L. Gu, and L. Monica Veca, "Doped carbon nanoparticles as a new platform for highly photoluminescent dots," J. Phys. Chem. C, vol. 112, pp. 18295-18298, 2008.
[30] S.-T. Yang, X. Wang, H. Wang, F. Lu, P. G. Luo, L. Cao, M. J. Meziani, J.-H. Liu, Y. Liu, M. Chen, Y. Huang, and Y.-P. Sun, "Carbon dots as nontoxic and high-performance fluorescence imaging agents," J. Phys. Chem. C, vol. 113, pp. 18110-18114, 2009.
[31] Q.-L. Zhao, Z.-L. Zhang, B.-H. Huang, J. Peng, M. Zhang, and D.-W. Pang, "Facile preparation of low cytotoxicity fluorescent carbon nanocrystals by electrooxidation of graphite," Chem. Commun., pp. 5116-5118, 2008.
[32] H. Nie, M. Li, Q. Li, S. Liang, Y. Tan, L. Sheng, W. Shi, and S. Xiao-An Zhang, "Carbon dots with continuously tunable full-color emission and their application in ratiometric pH sensing," Chemistry of Materials, vol. 26, pp. 3104-3112, 2014.
[33] Y. Dong, H. Pang, H. B. Yang, C. Guo, J. Shao, Y. Chi, C. M. Li, and T. Yu, "Carbon‐based dots co‐doped with nitrogen and sulfur for high quantum yield and excitation‐independent emission," Angewandte Chemie International Edition, vol. 52, pp. 7800-7804, 2013.
[34] O. e. Kozák, K. K. R. Datta, M. Greplová, V. c. Ranc, J. Kašlík, and R. Zbořil, "Surfactant-derived amphiphilic carbon dots with tunable photoluminescence," The Journal of Physical Chemistry C, vol. 117, pp. 24991-24996, 2013.
[35] W.-J. Niu, Y. Li, R.-H. Zhu, D. Shan, Y.-R. Fan, and X.-J. Zhang, "Ethylenediamine-assisted hydrothermal synthesis of nitrogen-doped carbon quantum dots as fluorescent probes for sensitive biosensing and bioimaging," Sensors and Actuators B: Chemical, vol. 218, pp. 229-236, 2015.
