Novel Circularly Polarized Substrate Integrated Waveguide Slot Antenna By Using A Polarizer Technique
الموضوعات : journal of Artificial Intelligence in Electrical Engineering
Omid Khodadad
1
()
Pejman Mohammadi
2
()
الکلمات المفتاحية: circularly-polarized, cavity-backed, RHCP, SIW,
ملخص المقالة :
circularly-polarized antenna is built based on new SIW(substrate integrated waveguide)structure which contains cavity-backed resonator and a conventional polarized ring with twosquare slits in inner and outer ring that differ 90° at position and is proposed for right-handedcircular polarization (RHCP) and fabricated in two separate layers. A broadband impedancebandwidth of 13.9% and a RHCP axial ratio of 0.5GHz have been obtained under thecondition of less than VSWR ≤2 and axial ratio≤ 3 dB, respectively.
[1] H. Uchimura, T. Takenoshita, and M. Fujii
(1998). “Development of a ‘laminated
waveguide’,” IEEE Trans.Microw. Theory
Tech., vol. 46, no. 12, pp. 2438–2443.
[2] J. Hirokawa and M. Ando (2000). “Efficiency
of 76-GHz post-wall waveguide- fed parallelplate
slot arrays,” IEEE Trans. Antennas
Propag., vol. 48, no. 11, pp. 1742–1745.
[3] D. Deslandes and K. Wu (2006). “Accurate
modeling, wave mechanisms, and design
considerations of a substrate integrated
waveguide,” IEEE Trans. Microw. Theory
Tech., vol. 54, no. 6, pp. 2516–2526.
[4] G. Q. Luo, Z. F. Hu, L. X. Dong, and L. L.
Sun (2008). “Planar slot antenna backed by
substrate integrated waveguide cavity,” IEEE
Antennas Wireless Propag. Lett.IEEE, vol. 7,
pp. 236–239.
[5] J. Liu, D. R. Jackson, and Y. Long (2012).
“Substrate integrated waveguide (SIW) leakywave
antenna with transverse slots,” IEEE
Trans. Antennas Propag., vol. 60, no. 1, pp.
20–29.
[6] O. Kramer, T. Djerafi, and K. Wu (2011).
“Very small footprint 60 GHz stacked Yagi
antenna array,” IEEE Trans. Antennas
Propag., vol. 59, no. 9, pp. 3204–3210.
[7] G.Q. Luo, Z. F.Hu, Y. Liang, L. Y.Yu, and L.
L. Sun (2009). “Development of low profile
cavity backed crossed slot antennas for planar
integration,” IEEE Trans. Antennas Propag.,
vol. 57, no. 10, pp. 2972–2979.
[8] S. Razavi and M. Neshati (2013).
“Development of a low profile circularly
polarized cavity backed antenna using
HMSIW technique,”.
[9] C. Jin, R. Li, A. Alphones, and X. Bao (2013).
“Quarter-mode substrate integrated waveguide
and its application to antennas design,” IEEE
Trans. Antennas Propag., vol. 61, no. 6, pp.
2921–2928.
[10] S. Sam and S. Lim (2013). “Electrically small
eighth-mode substrate-integrated waveguide
antenna with different resonant frequencies
depending on rotation of complementary split
ring resonator,” IEEE Trans. Antennas
Propag., vol. 61, no. 10, pp. 4933–4939.
[11] J. Xu, W. Hong, H. Tang, Z. Kuai, and K. Wu
(2008). “Half-mode substrate integrated
waveguide (HMSIW) leaky-wave antenna for
millimeter wave applications,” IEEE Antennas
Wireless Propag. Lett., vol. 7, pp. 85–88.
[12] B. Liu, W. Hong, Y.-Q.Wang, Q.-H. Lai, and
K.Wu (2007). “Half mode substrate integrated
waveguide (HMSIW) 3-dB coupler,” IEEE
Microw. Wireless Compon. Lett., vol. 17, no.
1, pp. 22–24.
[13] N. Grigoropoulos, B. Sanz-Izquierdo, and P.
R. Young (2005). “Substrate integratedfolded
waveguides (SIFW) and filters,” IEEE
Microw. Wireless Compon. Lett., vol. 15, no.
12, pp. 829–831.
[14] S. Zhang, T.-J. Bian, Y. Zhai,W. Liu, G.
Yang, and F.-L. Liu (2012). “Quarter substrate
integrated waveguide resonator applied to
fractal-shaped BPFs,” Microw. J., vol. 55, pp.
200–208.
[15] Q. Lai, C. Fumeaux, W. Hong, and R.
Vahldieck (2009). “Characterization of the
propagation properties of the half-mode
substrate integrated waveguide,” IEEE Trans.
Microw. Theory Tech., vol. 57, no. 8, pp.
1996–2004.
