شناسایی عوامل موثر در سطح توانمندی های فناوری تجهیزات پزشکی کشور با استفاده از تکنیک دلفی فازی

الموضوعات :

fatemeh hamidi ¹ , sadegh abedi ² , Mohammadreza Sanaie ³

1 - Department of Information Technology Management, Qazvin Branch, Islamic Azad University, Qazvin, Iran
2 - Department of Industrial management, Qazvin Branch, Islamic Azad University, Qazvin, Iran
3 - Department of Information Technology Management, Qazvin Branch, Islamic Azad University, Qazvin, Iran

تاريخ الإرسال : 10 الأحد , ذو القعدة, 1442 تاريخ التأكيد : 30 الأحد , رمضان, 1443 تاريخ الإصدار : 12 الإثنين , ذو الحجة, 1443

الکلمات المفتاحية: توانمندی های فناوری, تکنیک دلفی فازی, تجهیزات پزشکی,

ملخص المقالة :

تولید تجهیزات پزشکی، ضمن ایفای نقشی کلیدی در تامین نیازمندی های نظام سلامت، پتانسیل اقتصادی و فناورانه قابل ملاحظه ای برای رشد و توسعه دارد. لذا هدف اصلی پژوهش شناسایی عوامل موثر بر سطح توانمندی های فناوری تجهیزات پزشکی می باشد. ﭘﮋوﻫﺶ حاضر از حیث هدف کاربردی و از حیث اجرا اکتشافی ﺑــﻪ ﺷــﻴﻮة کتابخانه ای، اسنادی و ﭘﻴﻤﺎﻳﺸــﻲ با ﻧﻈﺮﺳﻨﺠﻲ از 15 نفر از متخصصان و صاحب نظران داخلی در حوزه تجهیزات پزشکی انجام شده است که پس از مرور ادبیات تحقیق 22 عامل تاثیرگذار جهت ارزیابی سطح توانمندی های فناوری تجهیزات پزشکی توسط خبرگان استخراج گردید. سپس از روش دلفی فازی جهت شناسایی و انتخاب متغیرهای تصمیم گیری استفاده شد که نتایج تحقیق نشان می دهد 5 عامل خلاقیت و نوآوری، توسعه فناوری، طراحی و مهندسی، ساخت و تولید و رقابت پذیری جهت ارزیابی سطح توانمندی های فناوری تجهیزات پزشکی به عنوان مهم ترین عوامل در سطح توانمندی های فناوری تجهیزات پزشکی شناسایی شدند.

المصادر:

1. Abbaszadeh, M. (2012). Considerations on Validity and Reliability in Qualitative Research, Journal of Applied Sociology, 23 (1): 4-19. (In Persian)


2. Ahmadvand, N., Fitras, M. H. (2018). The Impact of Import and Export of Low Technology Industries on Iran's Economic Growth, Iranian Journal of Applied Economic Studies, 7(27): 215-195. (In Persian(


3. Ashraf Kharamani, A., & Khamseh, A. (2019). Evaluation of Technology Capability of Wind Turbines Industry Using Panda and Ramanassen Model. Quarterly Journal of Industrial Technology Development, (37): 29-36. (In Persian)


4. Alavi Matin, Y., & Tolouei Ashlaghi, A. (2015). Assessing the technology capability of industrial The East Azerbaijan province and providing a suitable model for improve and upgrad technology, Journal of Productivity Management, 9 (35). (In Persian)


5. Arasti, M. R., Karimpour Kloo, A., & Firoozfar, B. (2016). A Conceptual Model for Technology Evaluation at Corporate Level Regarding Supply Chain Motives and Capabilities, Journal of Science & Technology Policy, 7 (4):40-55. (In Persian)


6. Boyd, D., & Crawford, K. (2012). Critical Questions for Big Data: Provocations for a Cultural, Technological, and Scholarly Phenomenon, Inf. Commun. Soc, 15 662–679.


7. Brito, J., Moreno, J. A., & Verdegay, J. L. (2012). Transport route planning models based on fuzzy approach. Iranian Journal of Fuzzy Systems, 9 (1): 141-158


8. Chang-Fu, H., Rong-Kwei, L., He-Yau, K., & Amy, H. I., L. (2014). A Systematic Evaluation Model for Solar Cell Technologies, Machematical Problems in Engineering, Article ID 542351.


9. Cho, S. P., Park, S. Y., Park, G. S., Lee, W. K. & Song, W. H. (2009). Comparative analysis on the performance evaluation of national R&D projects, Asian J. Technol. Innovat, 17, 121–142, http://dx.doi.org/10.1080/19761597.2009.9668669.


10. Chu, T.C., & Lin, Y. (2009). An Extension to Fuzzy MCDM. Computers and Mathematics with Applications, 57, 445–454.


11. Damnei, N., Babaei, F., & Dana, T. (2019). Determining and Rating Environmental Aspects Caused by the Production Process of Oxygenating Machine, Infectious Wastes Disinfection Device, and an Autoclave System with an Emphasis on Fuzzy AHP, TOLOO E BEHDASHT, School of Public Health, Yazd Shahid Sadoughi Univ Med Sci, 18(6):90-105.(In Persian)


12. Dehghani Sanich, A., & Behroznia, A. R. (2015). Identifying Effective Factors in the Level of Technological Capability of Electrical Industries (Case study: Iran Transfo Company), Quarterly Journal of Industrial Technology Development, (25): 84-77. (In Persian)


13. Ershadi Sis, M., Khodaei Mahmoudi, R., & Khezrloui Aghdam, R. (2013). Investigation and Evaluation of Technology Components with the Help of the Technology Atlas Model.Quarterly Journal of Industrial Technology Development, (22): 9-19. (In Persian)


14. Forghani, A. (2010). Measuring Technology Capability at the National Level, Studied in Iran. Quarterly Journal of Industrial Technology Development, 15. (In Persian)


15. Garshasbi, M., Salavati, A., Taheri, Z. & Mir Hosseini, T. S. (2016). Development practical Model for Technology Roadmap Formulation at the Enterprise Level Based on Change Management, Sixth International Conference and Tenth National Conference on Technology Management, Tehran, Association Iran Technology Management. (In Persian)


16. Ghazi Nouri, S. S. (2004). Technology Assessment: Tools to Help Policy, Tehran: Publish of New Industries Center. (In Persian)


17. Gholi Motlagh, M., Ghasemi, H., Mohammad Hosseini, B., Masaeli, R., & Fazli, S. (1400). Identification and ranking of factors affecting the policy of medical equipment production in Iran, Quarterly Journal of Public Policy, 7 (1): 9-29. (In Persian)


18. Grant, R. A. (2014). Strategy Analysis in the Present Age. Edited by Tehran: Rasa Institute. (In Persian)


19. Heshmati, M. M., Rahmani, K., & Feghhe Farahmand, N. (2019). Evaluation of technological capability for new technology strategies using Panda, Hex and Majlouf model in Sina Food Industries Holding, Quarterly Journal of Animal Environment, 11 (1): 400-391. (In Persian)


20. Hughes, t. & Evens, e. (2018). Emerging Technology Strategy: A strategy for guiding innovation to support the greater Portland region’s goals. Metro, 1-36.


21. Karimi Kashani, A. h., & Seyed Esfahani, A. M. (2005). Designing and explaining the pattern of technology development of the automotive industry in Iran with emphasis on export development. Quarterly Journal of Teacher of Humanities, 9 (2): 58-29. (In Persian)


22. Keramat, Sh., Manteghi, M., & Jafarnejad, A. (2019). Providing a Model for the Development of Space Technological Capabilities, Quartery Journal of Innovation Management, 8 (3): 75-53. (In Persian)


23. Khamseh, A. & Barati, S. (2017). Evaluation and prioritization of technological capabilities with a model developed in the automotive industry. Quarterly Journal of Technology Growth, 13 (52): 38-32. (In Persian)


24. Lal, S. (2006). Technology Policy and Market Encouragement. Sharif University Industrial Policy Office, Center for Technology Studies, Tehran. (In Persian)


25. Lindsay, J. (2011). The Technology Management: Audit, Cambridge Strategy Pub, UK New Models of Technology Assessment for Development, From STEPS Working Paper 45.


26. Mai, N., Phuong, N., Tung, N., & Vu, T. (2013). Assessment of the Capabilities of Technology and Research Development (R&D) at Food-Processing Firms in HO CHI MINH City, Vietnam, 3^rd International Conference on Management.


27. Majidifar, M. M., Zahedi, SH. S., Jafari, A., & Hashemi, S. S. (2021), the Prioritization of Technological Capability Assessment Indicators in Hotel Industry Case Study: Parsian Chain Hotels in Tehran.Tourism Management Studies, Quarterly Journal of Management & Accounting School, 10, (53). (In Persian)


28. Ocampo, L., Ebisa, J. A., Ombe, J., & Geen Escoto, M. (2018). Sustainable Ecotourism Indicators with fuzzy Delphi method – A Philippine Perspective. Ecological Indicators, 93, 874–888.


29. Powell,, (2003). The Delphi Techngue Myths and Realities. Journal of Advanced Nursing.


30. Radfar, R., & Khamseh, A. (2016). Technology Management (Comprehensive Attitude to Technology, Innovation and Commercialization). Scientific and Cultural Publications. (In Persian)


31. Radfar, R., Khamseh, A., Shieh, E., & Saghebi, M. (2014). Assessment of Technological Capability Level of Iranian Pharmaceutical Industry. Indian Journal of Science Research, 1, (2): 556-562.


32. Radfar, R., Moradpour, M., & Ehteshami Al-Agha, M. (2008). Providing a Model for Evaluation the Technological Capability of Auto-spare Parts Manufacturers. Journal of Management, 76. (In Persian)


33. Rao, S., & Perry, C. (2003). Convergent Interviewing To Build a Theory in Under-Researched Areas: Principles and An Example Investigation of Internet Usage In Inter-Firm.


34. Sadeghi, I., Saadabadi AA., Mazaraei, SH., & Nowroozi K. (2016). Investigating the Role of Intermediary Bodies of Innovation in Electromic Industries. 5^th International Conference and 9th National Conference on Technology Management. (In Persian)


35. Sarvar, R. & et al. (2010). The Place of Delphi Technique in Management and Urban Planning. Quarterly Journal of Urban Management, 2(4). (In Persian)


36. Shahlani, N., Naderi Sharif, A., & Mirzaei Azandariani, H. (2020). Designing an Assessing Model for the Capacity of Technology in Tactical Vehicle Production (Comparing a Defense Company with Similar Industries in the World). Scientific Quarterly Journal of Defense Strategy, 18 (71), 103-75. (In Persian)


37. Somervill, A. (2008). Effective us of the Delphi Process in Resrarch, Its Characteristes Strengths and Limitation.


38. Tabatabayan, S. A. A., Bagheri, S. K., Goodarzi, M., & Nodeh, A. (2010). Evaluation of Technology Policy in Indian Software Industry. Second Conference on Management of Technology. (In Persian)


39. Toloui, A., & Yaghoubi, A. (2012). Measuring Technological Level and Capability of the Industries in East Azerbaijan and Providing Proper Strategies for Improvement and Promotion of Technology. Journal of Basic and Applied Scientific Research, 2, 3664-3669. (In Persian)


40. Yuan, T., & Chen, P. (2012). Data Mining Applications in E-Government Information Security. Procedia Engineering, 29, 235–240.


41. Zaha, Z., Tian, Y. & Zillante, G. (2014). Modeling and Evaluation of the Wind Power Industry Chain: A Chain Study. Renewable and Sustainable Energy Reviews. 31, 397- 406.


42. Zarei, Gh. A., & Parsamehr, B. (2018). Identification of Effective Factors on the Development of Export of Medical Equipment Using Grounded Theory, Journal of Healthcare Management, 9 (3): 7-18. (In Persian)


43. Ziaee, A.M., Simforoosh, N., & Tabatabai, Sh. (2014). Evaluation of Postgraduate Medical Education Progress and Foresight: (a Necessity for Purposeful Development of P.G.M.E in IRAN)-Teb va Tazkiyeh, 23(1): 45-56. (In Persian)