افزایش سطح شکست ناپذیری وکاهش هزینه های زنجیره تامین برمبنای فناوری شناسایی با استفاده از فرکانس رادیویی
الموضوعات :
Rahim Ranjbar
1
,
Amir Najafi
2
,
Ali Mohammadi
3
,
Naser Hamidi
4
1 - Industrial Management Department, Zanjan Branch, Islamic Azad University, Zanjan, Iran
2 - Department of industrial engineering, Zanjan Branch, Islamic Azad university, Zanjan, Iran
3 - Department of Management, Zanjan Branch, Islamic Azad University, Zanjan, Iran
4 - Department of Management, Qazvin Unit, Islamic Azad University, Qazvin, Iran
تاريخ الإرسال : 12 الأربعاء , ربيع الثاني, 1440
تاريخ التأكيد : 12 الأحد , جمادى الثانية, 1440
تاريخ الإصدار : 15 الإثنين , جمادى الأولى, 1440
الکلمات المفتاحية:
مدیریت زنجیره تامین,
صنایع تولیدی,
شناسایی با استفاده از فرکانس رادیویی,
هزینه,
ملخص المقالة :
هدف این تحقیق، بررسی تاثیر فناوری شناسایی با استفاده از فرکانس رادیویی در افزایش سطح شکست ناپذیری وکاهش هزینه های زنجیره تامین صنایع تولیدی ارومیه می باشد. در این تحقیق، با استفاده از روش آماری استقلال خی دو به آزمون فرضیات مطرح شده و جهت بررسی نقش پیش بینی کننده متغیر مستقل شناسایی با استفاده از فرکانس رادیویی بر متغیر میانجی (مداخله گر) یعنی مدیریت عوامل انسانی، سازمانی و محیطی و نیز اثر آنها بر متغیر وابسته کاهش هزینه های زنجیره تامین از مدل تحلیل مسیر استفاده شد. نتایج بیانگر وجود ارتباط بین بکارگیری شناسایی با استفاده از فرکانس رادیویی و کاهش هزینه های تامین کنندگان، تولید کنندگان، توزیع کنندگان، خرده فروشان و مصرف کنندگان نهایی است. نتایج تحلیل مسیر و آزمون مدل برازش شده بیانگر وجود ارتباط مستقیم بین عوامل انسانی و عوامل محیطی، عوامل سازمانی و عوامل محیطی و نهایتا عوامل انسانی و بکارگیری شناسایی با استفاده از فرکانس رادیویی است و عوامل محیطی نیز بطور مستقیم و غیر مستقیم در بکارگیری شناسایی با استفاده از فرکانس رادیویی تاثیر گذار می باشد.
المصادر:
Alp Ustundag, Mehmet Tany. (2009). The impacts of Radio Frequency Identification (RFID) technology on supply chain costs, Transportation Research Part E 45, 29–38.
Amiri, M .Hossaini Kalateh, F. (1997). The use of RFID in Electronic Municipality, Second International Conference on commerce.
Asadi, Majid. (2017). Familiarity with the theory of reliability. Tehran: University Press Publication Center.
Ben, Z., Yung, K., Rohit, S., Rainer, F. (2006). The international jurnal of modern engineering, 7, 1.
Berry, D., Towill, D.R., Wadsley, N. (1994). supply chain management in the electronics productindustry, International Journal of physical Distribution & Logistics Management 24 (10), 20-32.
Carbone P., Katsifodimos A., Ewen S., Markl V., Haridi S., TzoumasApache K. (2015). flink: Stream and batch processing in a single engine Bulletin of the IEEE Computer Society Technical Committee on Data Engineering, 36 (4).
Chalie Q., Prabhu B.S., Xiaoyong S., Harish R., Peter C., Rajit G. (2005). WinRFID- Middleware for Distributed RFID Infrastrure.
Dadkhah, N. (2007). The Impact of RFID on supply chain management in the automotive industry, The Frist International Conference on Supply Chain Management and Information Systems.
Dorudchi, M. Nickmehr, N. (2007). Study and application of information technology in supply chain management, Fourth National Conference on Electronic Commerce.
Erabuild. (2006). Revivew of the Current State of Technology, Its and Potential Future Use in Construction, Final Report, December.
Gao RFID Inc. (2009). High Performance RFID enabled parking barrier gate.
Heidari Garehbagh, H. (2008). The Model implementation of supply chain management in small and medium enterprises. Journal of Technology Management, 5(17), 43-50.
Hugos, M. (2003). Essentials of Supply Chain Management, Supply Chain Management Review.
I-Hsuan Hong, Jr-Fong Dang, Yi-Hsuan Tsai, Chen-Shen Liu, Wang Kopezak. (1997). Logistic Partnership and Supply chain restructuring: survey results from the US Computer industry, Production and Operation Management 6 (3), 226-247.
Jiapeng Huang, Zhenzao Wen, Linghe Kong, Li Ge, Min-You Wu, Guihai Chen. (2018). Accelerate the classification statistics in RFID systems. Theoretical Computer Science.
Ladani, M., Larry, M. Esfahan, M. (2011). The role of RFID systems in reducing the cost of economic activity, the first national conference on the development of economic activities.
Mazaheri, G. Salimian, P. (2011). The use of RFID technology in the transportation industry, the first regional conference on new approaches in computer engineering and information technology.
Moorman, R. (2005). RFID in the supply chain, Air Transport World, 42, 52-60.
Parvarshkaran, Ebrahim (2006). Incrase Labor Productivity Utilizing RFID.
Patterson Krik, A., Grimm Curtis, M., Corsi Thomas, M. (2003). Adopting new technologies for supply chain management. Transportation Research part E 39, 95-121.
Raee, A. Nakhaee kamalabadi, A. (2007). The RFID in the supply chain industry (case study: the household appliances industry), The Second National Conference of RFID.
Rausand, Marvin, Høyland, Arnljot. (2003). System Reliability Theory: Models, Statistical Methods, and Applications, 2nd Edition (Wiley Series in Probability and Statistics. Translator: Amir Najafi, Tehran: Arvin Publishing.
Ruhina, M. (2008). The types of automatic identification systems, the Second National Conference of RFID.
Sacks, R., Navon, R., and Goldschmidt, E. (2003). Building progect model support for automared labor monitoring. J. Computer Civ.Eng. 147, 324-330.
Safari, H. Mehreban, A. Mogdehi, N. (2007). Application of RFID Technology in electronic Supply Chain, 1st International Conference on supply chain management and information systems.
Sarac, A. Abil, N.Dauzere-Peres, S. (2010). A literature review on the impact of RFID technologies on supply chain management. Int.J. Production Economics, 128 77-95.
Saunders, M.J. (1995). Chains, Pipelines, networks and value stream: the role, nature and value of suchmetaphors in forming perceptions of the task of purchasing and supplymanagement, First Worldwide.
Sharifzadeh, A. (2008). Design the Comprehensive system to identify and control the speed of vehicles by using RFID technology, The Second National Conference of RFID.
Shen Guo-qiang, Sun Chun-Jie, Zhang Chao. (2001). Influence of information Technology on Supply Chain Management. Science Management of Railway Material, 2, 37-38.
Tajima, M. (2007). Strategic value of RFID in supply chain management. Journal of Purchasing & Supply Management, 13, 261-273.
Tamil, E.M., Idris M.Y.I., Razak. Z., Noor N.M., Kin L.W. ( 2009). Car park system: a review of smart parking system and its technology. Information Technology Journal, 8(2), 101-113.
Tsang Lee, Ming-Li Wang, Pei-Chun Chen. (2011).An RFID application in the food supply chain: A case study of convenience stores in Taiwan, Journal of Food Engineering 106, 119–126.
Zhu, Weiping, and Sun, Shengchao. (2019). Supporting Interval Time Complex Events Processing in an RFID System. Procedia Computer Science
Xiaowei, Zhu, Samar, K. Mukhopadhyay, Hisashi, Kurata. (2012), A review of RFID technology and its managerial applications in different industries, J. Eng. Technol. Manage, 29, 152–161.
Yeganeh, B., Farooqi, E. Rahimifard, A. (2007). Products sequencing error analysis in stores using RFID technology, International Conference on Supply Chain Management and Information Systems.
_||_
Alp Ustundag, Mehmet Tany. (2009). The impacts of Radio Frequency Identification (RFID) technology on supply chain costs, Transportation Research Part E 45, 29–38.
Amiri, M .Hossaini Kalateh, F. (1997). The use of RFID in Electronic Municipality, Second International Conference on commerce.
Asadi, Majid. (2017). Familiarity with the theory of reliability. Tehran: University Press Publication Center.
Ben, Z., Yung, K., Rohit, S., Rainer, F. (2006). The international jurnal of modern engineering, 7, 1.
Berry, D., Towill, D.R., Wadsley, N. (1994). supply chain management in the electronics productindustry, International Journal of physical Distribution & Logistics Management 24 (10), 20-32.
Carbone P., Katsifodimos A., Ewen S., Markl V., Haridi S., TzoumasApache K. (2015). flink: Stream and batch processing in a single engine Bulletin of the IEEE Computer Society Technical Committee on Data Engineering, 36 (4).
Chalie Q., Prabhu B.S., Xiaoyong S., Harish R., Peter C., Rajit G. (2005). WinRFID- Middleware for Distributed RFID Infrastrure.
Dadkhah, N. (2007). The Impact of RFID on supply chain management in the automotive industry, The Frist International Conference on Supply Chain Management and Information Systems.
Dorudchi, M. Nickmehr, N. (2007). Study and application of information technology in supply chain management, Fourth National Conference on Electronic Commerce.
Erabuild. (2006). Revivew of the Current State of Technology, Its and Potential Future Use in Construction, Final Report, December.
Gao RFID Inc. (2009). High Performance RFID enabled parking barrier gate.
Heidari Garehbagh, H. (2008). The Model implementation of supply chain management in small and medium enterprises. Journal of Technology Management, 5(17), 43-50.
Hugos, M. (2003). Essentials of Supply Chain Management, Supply Chain Management Review.
I-Hsuan Hong, Jr-Fong Dang, Yi-Hsuan Tsai, Chen-Shen Liu, Wang Kopezak. (1997). Logistic Partnership and Supply chain restructuring: survey results from the US Computer industry, Production and Operation Management 6 (3), 226-247.
Jiapeng Huang, Zhenzao Wen, Linghe Kong, Li Ge, Min-You Wu, Guihai Chen. (2018). Accelerate the classification statistics in RFID systems. Theoretical Computer Science.
Ladani, M., Larry, M. Esfahan, M. (2011). The role of RFID systems in reducing the cost of economic activity, the first national conference on the development of economic activities.
Mazaheri, G. Salimian, P. (2011). The use of RFID technology in the transportation industry, the first regional conference on new approaches in computer engineering and information technology.
Moorman, R. (2005). RFID in the supply chain, Air Transport World, 42, 52-60.
Parvarshkaran, Ebrahim (2006). Incrase Labor Productivity Utilizing RFID.
Patterson Krik, A., Grimm Curtis, M., Corsi Thomas, M. (2003). Adopting new technologies for supply chain management. Transportation Research part E 39, 95-121.
Raee, A. Nakhaee kamalabadi, A. (2007). The RFID in the supply chain industry (case study: the household appliances industry), The Second National Conference of RFID.
Rausand, Marvin, Høyland, Arnljot. (2003). System Reliability Theory: Models, Statistical Methods, and Applications, 2nd Edition (Wiley Series in Probability and Statistics. Translator: Amir Najafi, Tehran: Arvin Publishing.
Ruhina, M. (2008). The types of automatic identification systems, the Second National Conference of RFID.
Sacks, R., Navon, R., and Goldschmidt, E. (2003). Building progect model support for automared labor monitoring. J. Computer Civ.Eng. 147, 324-330.
Safari, H. Mehreban, A. Mogdehi, N. (2007). Application of RFID Technology in electronic Supply Chain, 1st International Conference on supply chain management and information systems.
Sarac, A. Abil, N.Dauzere-Peres, S. (2010). A literature review on the impact of RFID technologies on supply chain management. Int.J. Production Economics, 128 77-95.
Saunders, M.J. (1995). Chains, Pipelines, networks and value stream: the role, nature and value of suchmetaphors in forming perceptions of the task of purchasing and supplymanagement, First Worldwide.
Sharifzadeh, A. (2008). Design the Comprehensive system to identify and control the speed of vehicles by using RFID technology, The Second National Conference of RFID.
Shen Guo-qiang, Sun Chun-Jie, Zhang Chao. (2001). Influence of information Technology on Supply Chain Management. Science Management of Railway Material, 2, 37-38.
Tajima, M. (2007). Strategic value of RFID in supply chain management. Journal of Purchasing & Supply Management, 13, 261-273.
Tamil, E.M., Idris M.Y.I., Razak. Z., Noor N.M., Kin L.W. ( 2009). Car park system: a review of smart parking system and its technology. Information Technology Journal, 8(2), 101-113.
Tsang Lee, Ming-Li Wang, Pei-Chun Chen. (2011).An RFID application in the food supply chain: A case study of convenience stores in Taiwan, Journal of Food Engineering 106, 119–126.
Zhu, Weiping, and Sun, Shengchao. (2019). Supporting Interval Time Complex Events Processing in an RFID System. Procedia Computer Science
Xiaowei, Zhu, Samar, K. Mukhopadhyay, Hisashi, Kurata. (2012), A review of RFID technology and its managerial applications in different industries, J. Eng. Technol. Manage, 29, 152–161.
Yeganeh, B., Farooqi, E. Rahimifard, A. (2007). Products sequencing error analysis in stores using RFID technology, International Conference on Supply Chain Management and Information Systems.
