Evaluation of CO2/CH4 Gas Separation in PVA and PVC Mixed Matrix Membrane Permeation Models
الموضوعات : International Journal of Heterocyclic ChemistryElaheh Gandomkar Ghalhari 1 , Samaneh Koudzari Farahani 2 , Abdolreza Moghadassi 3 , Ezzatollah Joudaki 4 , Seyyed Mohsen Hosseini 5
1 - Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, 38156-8-8349, Iran
2 - Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, 38156-8-8349, Iran
3 - Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, 38156-8-8349, Iran
4 - Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, 38156-8-8349, Iran
5 - Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, 38156-8-8349, Iran
الکلمات المفتاحية: Maxwell model, PVA, Mixed Matrix Membrane, PVC, Mathematic modeling, CO2/CH4 separation,
ملخص المقالة :
The purpose of this paper is to examine, predict and compare gas transport behavior of mixed matrix membranes (MMMs) combined with porous particles with different polymeric matrix. In this regard, composite flat sheet membranes are prepared from different amounts of poly(Polyvinyl alcohol) (PVA) and poly vinyl chloride (PVC) Gas permeability were studied for the prepared membranes. Then these membranes modelled were performed by Maxwell, and the results of Maxwell model with the experimental data were compared and the percentage of error was shown. Studied results showed that despite higher permeability emissions of carbon dioxide with PVC membrane grid with carbon nanotubes in the membrane of PVA but Maxwell model for PVA membranes without any additive as a polymeric membrane has provided more acceptable results.
