Determine folding mechanism of Lali structure, northern Dezful, Zagros, Iran

الموضوعات :

Gholamreza Asgari ¹ , Farzin Ghaemi ² , Bahman Soleimany ³ , Behnam Rahimi ⁴ , Mehrdad Maleki ⁵

1 - Department of Geology, Faculty of Science, Ferdowsi University of Mashad, Iran
2 - Department of Geology, Faculty of Science, Ferdowsi University of Mashad, Iran
3 - Exploration Directorate of the National Iranian Oil Company (NIOC), Tehran, Iran
4 - Department of Geology, Faculty of Science, Ferdowsi University of Mashad, Iran
5 - Exploration Directorate of the National Iranian Oil Company (NIOC), Tehran, Iran

تاريخ الإرسال : 30 الجمعة , جمادى الأولى, 1439 تاريخ التأكيد : 23 الأحد , ربيع الثاني, 1440 تاريخ الإصدار : 25 الإثنين , رجب, 1440

الکلمات المفتاحية: Folding mechanism, Geometry parameters, Detachment depth, Dezful Embayment, Zagros,

ملخص المقالة :

Lali sub-surface structure, with a NW-SE Zagros trending is located in Dezful Embayment. To determine the folding mechanism, structural geometric parameters including limbs dip, amplitude, wavelength, and crestal length were determined in four stages during deformation. In order to investigate the lateral folding mechanism, these geometric parameters were analyzed in three parts in the Lali structure including northwest, central and southeast. Lali structure in all three sections, show detachment folding mechanism. At the initial stage, due to the rheology of the region's stratigraphic units, the folding mechanism was fault-bend fold and due to the thickness of incompetent units, folding mechanism changes from the fault-bend fold to fault detachment fold and growth of this structure continues with this mechanism. As the deformation continues, detachment folding, the Dahlstrom type inclined to migration type. By identifying the folding mechanism of the Lali structure, determination of the detachment depth was necessary with two computational and graphical methods. Therefore, the depth of this surface was estimated at about 7500-8500 m for Lali structure. This amount is determined at the maximum thickness of the stratigraphic sequence of the region due to the migration of incompetent units to the core of the Lali structure.

المصادر:

1. Biot MA (1961) Theory of folding of stratified visco-elastic media and its implications in tectonics and orogenesis, Geological Society of America Bulletin 72: 1595-1620.


2. Brandes C, Tanner DC (2017) Fault-related folding: A review of kinematic models and their application. Earth-Science Reviews 138: 352–370.


3. Bulnes M, Poblet J (1999) Estimating the detachment depth in cross sections involving detachment folds. Geol. Mag. 136 (4): 395-412.


4. Carruba S, Perotti CR, Buonaguro R, Calabro´ R, Carpi R, Naini M (2006) Structural pattern of the Zagros foldand- thrust belt in the Dezful Embayment (SW Iran): Styles of continental contraction: Geological Society of America Special Paper, 414: 11–32.


5. Chamberlin RT (1910) The Appalachian folds of central Pennsylvania. Journal of Geology18: 228–51.


6. Chamberlin  RT (1919) The building of the Colorado Rockies. Journal of Geology 27:225–251.


7. Contreras J, Suter, M (1990) Kinematic modeling of cross-sectional deformation sequences by computer simulation. Journal of Geophysical Research 95: 21913-21929.


8. Contreras J, Suter, M (1997) A kinematic model for the formation of duplex systems with a perfectly planar roof thrust. Journal of Structural Geology 19: 269-278.


9. Contreras J (2010) A model for low amplitude detachment folding and syntectonic stratigraphy based on the conservation of mass equation. Journal of Structural Geology 32: 566-579.


10. Daëron M, Avouac JP, Charreau J (2007). Modeling the shortening history of a fault tip fold using structural and geomorphic records of deformation. Journal of Geophysical Research 112, B03S13.


11. Davis DM, Engelder T (1985) The role of salt in fold-and-thrust belts. Tectonophysics, 119(1): 67-88.


12. Derikvand B, Alavi SA, Abdollahie Fard I, Hajialibeigi H (2018) Folding style of the Dezful Embayment of Zagros Belt: Signatures of detachment horizons, deep-rooted faulting and syn-deformation deposition. Marine and Petroleum Geology 91: 501–518.


13. Epard JL, Groshong RH (1993) Excess area and depth to detachment. American Association of Petroleum Geologists 77: 1291-1302.


14. Epard JL, Groshong RH (1995) Kinematic model of detachment folding including limb rotation, fixed hinges and layer-parallel strain. Tectonophysics 247, 85-103.


15. Hardy S (1995) A method for quantifying the kinematics of fault-bend folding. Journal of Structural Geology 17: 1785-1788.


16. Hardy S, Connors CD (2006) Short note: a velocity description of shear fault-bend folding. Journal of Structural Geology 28: 536-543.


17. Homza TX, Wallace WK (1995) Geometric and kinematic models for detachment folds with fixed and variable detachment depths. Journal of Structural Geology 17: 575-88.


18. Jamison WR (1987) Geometric analysis of fold development in overthrust terranes. Journal of Structural Geology 9: 207-219.


19. Mitra S (1990) Fault-propagation folds: geometry, kinematic evolution, and hydrocarbon traps. American Association of Petroleum Geologists 74.


20. Mitra S (2003) A unified kinematic model for the evolution of detachment folds. Journal of Structural Geology, 25(10): 1659-1673.


21. Nemcok M, Schamel S, Gayer R (2005) Thrust belts Structural Architecture, Thermal Regimes, and Petroleum Systems. Cambridge University Press, New York.


22. NIOC (National Iranian Oil Company) (2016) Geological Reports, Final Well Reports, Well Logs Reports, Reservoir Geological Reports, Maps, Geological and Geophysical Report: Internal Reports.


23. O’Brien CAE (1957) Salt Diapirism in south Persia. Geologie en Mijnbouw 19: 357-376.


24. Poblet J, McClay K (1996) Geometry and kinematics of single-layer detachment folds. American Association of Petroleum Geologists, 80(7): 1085-1109.


25. Poblet J, Bulnes M, McClay K, Hardy S (2004) Plots of crestal structural relief and fold area versus shortening a graphical technique to unravel the kinematics of thrust-related folds. In: McClay, K. (Ed.), Thrust Tectonics and Hydrocarbon Systems. AAPG Memoir 82. The American Association of Petroleum Geologists, Tulsa, 372-399.


26. Sherkati S, Molinaro M, Frizon de Lamotte D, Letouzey J (2005) Detachment folding in the Central and Eastern Zagros fold-belt (Iran): salt mobility, multiple detachments and late basement control Journal of Structural Geology. 27 (9): 1680-1696.


27. Sherkati S, Letouzey J, Frizon de Lamotte D (2006) Central Zagros fold‐thrust belt (Iran): New insights from seismic data, field observation, and sandbox modeling. Tectonics, 25, TC4007.


28. Soleimany B, Poblet J, Bulnes M, Sabat F (2011) Fold amplification history unravelled from growth strata: The Dorood anticline, NW Persian Gulf. J. Geol. Soc. 168: 219-234.


29. Soleimany B, Nalpas T, Sabat F (2013) Multidetachment analogue models of fold reactivation in transpression: the NW Persian Gulf. Geol. Acta 11 (3): 265-276.


30. Storti F, Salvini F, McClay K (1997) Fault-related folding in sandbox analogue models of thrust wedges. Journal of Structural Geology 19: 583-602.


31. Suppe J (1983) Geometry and kinematics of fault-bend folding. American Journal of science, 283(7): 684-721.


32. Suppe J (1985) Principles of Structural Geology. Prentice-Hall, Englewood Cliffs.


33. Suppe J, Medwedeff DA (1990) Geometry and kinematics of fault-propagation folding. Eclogae Geol. Helvetiae 83: 409–454.


34. Suppe J, Connors CD, Zhang Y (2004) Shear fault-bend folding. In: McClay, K.R. (Ed.), Thrust Tectonics and Hydrocarbon Systems. American Association of Petroleum Geologists Memoir82. The American Association of Petroleum Geologists, Tulsa, 303-323.


35. Vergés J, Burbank DW, Meigs A (1996) Unfolding: an inverse approach to fold kinematics. Geology 24: 175-178.


36. Vergés J, Goodarzi MH, Emami H, Karpuz R, Efstathiou J, Gillespie P (2009) Multiple detachment folding in Pusht-e Kuh arc, Zagros: Role of mechanical stratigraphy. In: McClay, K., Shaw J and Suppe J (eds) Thrust Fault-related Folding. American Association of Petroleum Geologists Memoirs, 94: 1–26.


37. Zehnder AT, Allmendinger RW (2000) Velocity field for the trishear model. Journal of Structural Geology 22: 1009-1014.