Extended Finite Element Method for Statics and Vibration Analyses on Cracked Bars and Beams
الموضوعات :
F Mottaghian
1
(Department of Mechanical Engineering, University of Guilan, Rasht, Iran)
A Darvizeh
2
(Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran)
A Alijani
3
(Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran)
الکلمات المفتاحية: Extended finite element method, Statics and vibration, Cracked bars and beams, Increasing Gauss integration points, Rectangle sub-grid,
ملخص المقالة :
In this paper, the extended finite element method (XFEM) is employed to investigate the statics and vibration problems of cracked isotropic bars and beams. Three kinds of elements namely the standard, the blended and the enriched elements are utilized to discretize the structure and model cracks. Two techniques referred as the increase of the number of Gauss integration points and the rectangle sub-grid are applied to refine the integration within the blended and enriched elements of the beam in which the priority of the developed rectangle sub-grid technique is identified. The stiffness and the mass matrices of the beam are extended by considering the Heaviside and the crack tip functions. In a plane stress analysis, the effects of various crack positions and depths, different boundary conditions and other geometric parameters on the displacement and the stress contours are detected. Moreover, in a free vibration analysis, changes of the natural frequencies and the mode shapes due to the aforementioned effects are determined.
[1] Wriggers P., 2008, Nonlinear Finite Element Methods, Springer Science & Business Media.
[2] Reddy J. N., 2014, An Introduction to Nonlinear Finite Element Analysis: with Applications to Heat Transfer, Fluid Mechanics, and Solid Mechanics, OUP Oxford.
[3] Logan D. L., 2011, A First Course in the Finite Element Method, Cengage Learning.
[4] Leissa A. W., Qatu M. S., 2011, Vibrations of Continuous Systems, McGraw-Hill.
[5] Rao S. S., Yap F. F., 2011, Mechanical Vibrations, Prentice Hall Upper Saddle River.
[6] Cook R. D., 1994, Finite Element Modeling for Stress Analysis, Wiley.
[7] Kahya V., Turan M., 2017, Finite element model for vibration and buckling of functionally graded beams based on the first-order shear deformation theory, Composites Part B: Engineering 109: 108-115.
[8] Darvizeh M. Darvizeh A., Ansari R., Alijani A., 2015, Pre-and post-buckling analysis of functionally graded beams subjected to statically mechanical and thermal loads, Scientia Iranica, Transaction B, Mechanical Engineering 22: 778-791.
[9] Alijani A., Darvizeh M., Darvizeh A., Ansari R., 2015, Elasto-plastic pre-and post-buckling analysis of functionally graded beams under mechanical loading, Proceedings of the Institution of Mechanical Engineers, Journal of Materials Design and Applications 229: 146-165.
[10] Mohammadi S., 2008, Extended Finite Element Method: for Fracture Analysis of Structures, John Wiley & Sons.
[11] Khoei A. R., 2014, Extended Finite Element Method: Theory and Applications, John Wiley & Sons.
[12] Biondi B., Caddemi S., 2005, Closed form solutions of Euler–Bernoulli beams with singularities, International Journal of Solids and Structures 42: 3027-3044.
[13] Nakhaei A., Dardel M., Ghasemi M., Pashaei M., 2014, A simple method for modeling open cracked beam, International Journal of Engineering-Transactions B: Applications 28: 321-329.
[14] Skrinar M., 2009, Elastic beam finite element with an arbitrary number of transverse cracks, Finite Elements in Analysis and Design 45: 181-189.
[15] Xiao Y., Huang J., Ouyang Y., 2016, Bending of Timoshenko beam with effect of crack gap based on equivalent spring model, Applied Mathematics and Mechanics 37: 513-528.
[16] Dolbow J., Belytschko T., 1999, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering 46: 131-150.
[17] Moës N., Belytschko T., 2002, Extended finite element method for cohesive crack growth, Engineering Fracture Mechanics 69: 813-833.
[18] Sukumar N., Moës N., Moran B., Belytschko T., 2000, Extended finite element method for three-dimensional crack modelling, International Journal for Numerical Methods in Engineering 48: 1549-1570.
[19] Borst R. d., Remmers J. J., Needleman A., Abellan M. A., 2004, Discrete vs smeared crack models for concrete fracture: bridging the gap, International Journal for Numerical and Analytical Methods in Geomechanics 28: 583-607.
[20] Kang Z., Bui T. Q., Saitoh T., Hirose S., 2017, Quasi-static crack propagation simulation by an enhanced nodal gradient finite element with different enrichments, Theoretical and Applied Fracture Mechanics 87: 61-77.
[21] Alijani A., Mastan Abadi M., Darvizeh A., Abadi M. K., 2018, Theoretical approaches for bending analysis of founded Euler-Bernoulli cracked beams, Archive of Applied Mechanics 88: 875-895.
[22] Mottaghian F., Darvizeh A., Alijani A., 2018, A novel finite element model for large deformation analysis of cracked beams using classical and continuum-based approaches, Archive of Applied Mechanics 2018: 1-36.
[23] Matbuly M., Ragb O., Nassar M., 2009, Natural frequencies of a functionally graded cracked beam using the differential quadrature method, Applied Mathematics and Computation 215: 2307-2316.
[24] Nahvi H., Jabbari M., 2005, Crack detection in beams using experimental modal data and finite element model, International Journal of Mechanical Sciences 47: 1477-1497.
[25] Orhan S., 2007, Analysis of free and forced vibration of a cracked cantilever beam, NDT & E International 40: 443-450.
[26] Attar M., Karrech A., Regenauer-Lieb K., 2014, Free vibration analysis of a cracked shear deformable beam on a two-parameter elastic foundation using a lattice spring model, Journal of Sound and Vibration 333: 2359-2377.
[27] Behzad M., Ebrahimi A., Meghdari A., 2008, A new continuous model for flexural vibration analysis of a cracked beam, Polish Maritime Research 15: 32-39.
[28] Shifrin E., Ruotolo R., 1999, Natural frequencies of a beam with an arbitrary number of cracks, Journal of Sound and Vibration 222: 409-423.
[29] Bachene M., Tiberkak R., Rechak S., 2009, Vibration analysis of cracked plates using the extended finite element method, Archive of Applied Mechanics 79: 249-262.
[30] Natarajan S., Baiz P. M., Bordas S., Rabczuk T., Kerfriden P., 2011, Natural frequencies of cracked functionally graded material plates by the extended finite element method, Composite Structures 93: 3082-3092.
[31] Nguyen-Thoi T., Rabczuk T., Lam-Phat T., Ho-Huu V., Phung-Van P., 2014, Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3), Theoretical and Applied Fracture Mechanics 72: 150-163.
