Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
الموضوعات :
1 - Engineering Faculty, Hakim Sabzevari University, Sabzevar, Iran
2 - Instiutute for Infrastructure Engineering, Western Sydney University, Penrith, NSW 2751, Australia
الکلمات المفتاحية: Finite element model, In-plane analysis, Out-of-plane buckling, Restricted distortional buckling, Partial shear interaction,
ملخص المقالة :
Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite steel/concrete I-beams subjected to negative or hogging bending. There is none however that includes the effect of partial shear interaction. In this paper, finite element models for in-plane analysis and out-of-plane buckling of continuous composite I-beams including the effects of partial shear interaction are presented.
[1] Newmark N.M., 1951, Test and analysis of composite beams with incomplete interaction, Proceedings of Society for Experimental Stress Analysis 9(1): 75-92.
[2] Bradford M.A., Gao Z.,1992, Distortional buckling solutions for continuous composite beams, Journal of Structural Engineering 118(1): 73-89.
[3] Dekker N.W., 1995, Factors influencing the strength of continuous composite beams in negative bending, Journal of Constructional Steel Research 34: 161-185.
[4] Tehami M.,1997, Local buckling in class 2 continuous composite beams, Journal of Constructional Steel Research 43(1-3): 141-159.
[5] Jasim N.A., Atalla A., 1999, Deflections of partially composite continuous beams: A simple approach, Journal of Constructional Steel Research 49: 291-301.
[6] Nie J., Cai C.S., 2003, Steel-concrete composite beams considering shear slip effects, Journal of Structural Engineering 129(4): 495-506.
[7] Nie J., Fan J., Cai C. S., 2004, Stiffness and deflection of steel-concrete composite beams under negative bending, Journal of Structural Engineering 130(11): 1842-1851.
[8] Ranzi G., Bradford M.A., Uy B., 2004, A direct stiffness analysis of a composite beam with partial interaction, International Journal for Numerical Methods in Engineering 61: 657-672.
[9] Bradford M.A., 1997, Lateral-distortional buckling of continuously restrained columns, Journal of Constructional Steel Research 42(2): 121-139.
[10] Bradford M.A., Ronagh H.R., 1997, Generalized elastic buckling of restrained I-beams by FEM, Journal of Structural Engineering 23(12): 1631-1637.
[11] Bradford M.A., Trahair N.S., 1981, Distortional buckling of I-beams, Journal of The Structural Division 107: 355-370.
[12] Bradford M.A., Ronagh H.R., 1997, Elastic distortional buckling of tapered composite beams, Journal of Structural Engineering and Mechanics 5(3): 269-281.
[13] Bradford M.A., Ge X.P., 1997, Elastic distortional buckling of continuous I-beams, Journal of Constructional Steel Research 41(2-3): 249-266.
[14] Bradford M.A., Kemp A.R., 2000, Buckling in continuous composite beams, Progress in Structural Engineering and Materials 2: 169-178.
[15] Vrcelj Z., 2004, Buckling Modes in Continuous Composite Beams, PhD Thesis, The University of New South Wales, Sydney, Australia.
[16] Xu R., Wu Y.F.,2007, Two-dimensional analytical solutions of simply supported composite beams with interlayer slips, International Journal of Solids and Structures 44: 165-175.
[17] Wang A.J., Chung K.F., 2008, Advanced finite element modelling of perforated composite beams with flexible shear connectors, Engineering Structures 30(10): 2724-2738.
[18] Zona A., Ranzi G., 2011, Finite element models for non-linear analysis of steel concrete composite beams with partial interaction in combined bending and shear, Finite Element in Analysis and Design 47(2): 98-118.
[19] Chakrabarti A., Sheikh A.H., Griffith M., Oehlers D.J., 2012, Analysis of composite beams with partial shear interactions using a higher order beam theory, Engineering Structur 36: 283-291.
[20] Lezgy-Nazargah M., 2014, An isogeometric approach for the analysis of composite steel–concrete beams, Thin-Walled Structures 84: 406-415.
[21] Lezgy-Nazargah M., Kafi L., 2015, Analysis of composite steel-concrete beams using a refined high-order beam theory, Steel and Composite Structures 18(6): 1353-1368.
[22] He G., Yang X., 2015, Dynamic analysis of two-layer composite beams with partial interaction using a higher order beam theory, International Journal of Mechanical Sciences 90: 102-112.
[23] Chen S., Limazie T., Tan J., 2015, Flexural behavior of shallow cellular composite floor beams with innovative shear connections, Journal of Constructional Steel Research 106: 329-346.
