Effect of Temperature Changes on Dynamic Pull-in Phenomenon in a Functionally Graded Capacitive Micro-beam
الموضوعات :
B Mohammadi-Alasti
1
(Department of Agricultural Machinery Engineering, Bonab Branch, Islamic Azad University)
G Rezazadeh
2
(Department of Mechanical Engineering, Urmia University)
M Abbasgholipour
3
(Department of Agricultural Machinery Engineering, Bonab Branch, Islamic Azad University)
الکلمات المفتاحية: Thermal, MEMS, FGM, Instability, Cantilever micro-beam, Electrical, Dynamic pull-in voltage,
ملخص المقالة :
In this paper, dynamic behavior of a functionally graded cantilever micro-beam and its pull-in instability, subjected to simultaneous effects of a thermal moment and nonlinear electrostatic pressure, has been studied. It has been assumed that the top surface is made of pure metal and the bottom surface from a metal–ceramic mixture. The ceramic constituent percent of the bottom surface ranges from 0% to 100%. Along with the Volume Fractional Rule of material, an exponential function has been applied to represent the continuous gradation of the material properties through the micro-beam thickness. Attentions being paid to the ceramic constituent percent of the bottom surface, five different types of FGM micro-beams have been studied. Nonlinear integro-differential thermo-electro-mechanical equation based on Euler–Bernoulli beam theory has been derived. The governing equation in the static case has been solved using Step-by-Step Linearization Method and Finite Difference Method. Fixed points or equilibrium positions and singular points of the FGM micro-beam have been determined and shown in the state control space. In order to study stability of the fixed points, beam motion trajectories have been drawn, with different initial conditions, in the phase plane. In order to find the response of the micro-beam to a step DC voltage, the nonlinear equation of motion has been solved using Galerkin-based reduced-order model and time histories and phase portrait for different applied voltages and various primal temperatures have been illustrated. The effects of temperature change and electrostatic pressure on the deflection and stability of FGM micro-beams having various amounts of the ceramic constituent have been studied .
[1] Simsek M., 2010, Vibration analysis of a functionally graded beam under a moving mass by using different beam theories, Composite Structures 92: 904–917.
[2] Sankar B.V., 2001, An elasticity solution for functionally graded beams, Composite Science and Technology 61(5): 689–696.
[3] Zhong Z., Yu T., 2007, Analytical solution of a cantilever functionally graded beam, Composites Science and Technology 67: 481-488.
[4] Chakraborty A., Gopalakrishnan S., Reddy J.N., 2003, A new beam finite element for the analysis of functionally graded materials, International Journal of Mechanic Science 45(3): 519–539.
[5] Chakraborty A., Gopalakrishnan S., 2003, A spectrally formulated finite element for wave propagation analysis in functionally graded beams, International Journal of Solids and Structures 40(10): 2421–2448.
[6] Kapuria S., Bhattacharyya M., Kumar A.N., 2008, Bending and free vibration response of layered functionally graded beams: A theoretical model and its experimental validation, Composite Structures 82(3): 390-402.
[7] Aydogdu M., Taskin V., 2007, Free vibration analysis of functionally graded beams with simply supported edges, Material Design 28(5): 1651–1656.
[8] Gharib A., Salehi M., Fazeli S., 2008, Deflection control of functionally graded material beams with bonded piezoelectric sensors and actuators, Materials Science and Engineering 498: 110-114.
[9] Piovan T., Sampaio R., 2008, Vibrations of axially moving flexible beams made of functionally graded materials, Thin-Walled Structures 46: 112-121.
[10] Xiang H.J., Shi Z.F., 2009, Static analysis for functionally graded piezoelectric actuators or sensors under a combined electro-thermal load, European Journal of Mechanics A/Solids 28: 338-346.
[11] Ying J., Lü C.F., Chen W.Q., 2008, Two-dimensional elasticity solutions for functionally graded beams resting on elastic foundations, Composite Structures 84(3): 209–219.
[12] Sina S.A., Navazi H.M., Haddadpour H., 2009, An analytical method for free vibration analysis of functionally graded beams, Materials and Design 30(3): 741–747.
[13] Simsek M., Kocatürk T., 2009, Free and forced vibration of a functionally graded beam subjected to a concentrated moving harmonic load, Composite Structures 90(4): 465-473.
[14] Simsek M., 2010, Non-linear vibration analysis of a functionally graded Timoshenko beam under action of a moving harmonic load, Composite Structures 92(10): 2532-2546.
[15] Simsek M., 2010, Fundamental frequency analysis of functionally graded beams by using different higher-order beam theories, Nuclear Engineering and Design 240: 697-705.
[16] Khalili S.M.R., Jafari A.A., Eftekhari S.A., 2010, A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads, Composite Structures 92(10): 2497-2511.
[17] Mahi A., Adda B.E.A., Tounsi A., Mechab I., 2010, An analytical method for temperature-dependent free vibration analysis of functionally graded beams with general boundary conditions, Composite Structures 92(8): 1877-1887.
[18] Craciunescu C.M., Wuttig M., 2003, New ferromagnetic and functionally grade shape memory alloys, Journal of Optoelectron Advance Material 5(1): 139–146.
[19] Fu Y.Q., Du H.J., Zhang S., 2003, Functionally graded TiN/TiNi shape memory alloy films, Journal of Materials Letters 57(20): 2995–2999.
[20] Fu Y.Q., Du H.J., Huang W.M., Zhang S., Hu M., 2004, TiNi-based thin films in MEMS applications: a review, Journal of Sensors and Actuators A 112(2–3): 395–408.
[21] Witvrouw A., Mehta A., 2005, The use of functionally graded poly-SiGe layers for MEMS applications, Journal of Functionally Graded Materials VIII 492–493: 255–260.
[22] Lee Z., Ophus C., Fischer L.M., Nelson-Fitzpatrick N., Westra K.L., Evoy S., et al., 2006, Metallic NEMS components fabricated from nanocomposite Al–Mo films, Journal of Nanotechnology 17(12): 3063–3070.
[23] Rahaeifard M., Kahrobaiyan M.H., Ahmadian M.T., 2009, Sensitivity analysis of atomic force microscope cantilever made of functionally graded materials, Proceedings of the 3rd international conference on micro-and nanosystems (MNS3), San Diego, CA, USA.
[24] Senturia S., 2001, Microsystem Design, Norwell, MA: Kluwer.
[25] Sadeghian H., Rezazadeh G., Osterberg P., 2007, Application of the generalized differential quadrature method to the Study of Pull-In Phenomena of MEMS switches, Journal of Micro Electromechanical System IEEE/ASME 16(6): 1334-1340.
[26] Rezazadeh G., Khatami F., Tahmasebi A., 2007, Investigation of the torsion and bending effects on static stability of electrostatic torsional micromirrors, Journal of Microsystem Technologies 13(7): 715-722.
[27] Sazonova V., 2006, A Tunable Carbon Nanotube Resonator, Ph.D. Thesis, Cornell University.
[28] Rezazadeh G., Tahmasebi A., Zubtsov M., 2006, Application of piezoelectric layers in electrostatic MEM actuators: controlling of Pull-in Voltage, Journal of Microsystem Technologies 12(12): 1163-1170.
[29] Bao M., Wang W., 1996, Future of Micro Electromechanical Systems (MEMS), Sensors and Actuators A: Physical 56: 135-141.
[30] Mehdaoui A., Pisani M.B., Tsamados D., Casset F., Ancey P., Ionescu A.M., 2007, MEMS tunable capacitors with fragmented electrodes and rotational electro-thermal drive, Journal of Microsystem Technologies 13(11): 1589-1594.
[31] Zhang Y., Zhao Y., 2006, Numerical and analytical study on the pull-in instability of micro- structure under electrostatic loading, Journal of Sensors and Actuators A: Physical 127: 366-367.
[32] Nguyen C.T.C., Katehi L.P.B., Rebeiz G.M., 1998, Micromachined devices for wireless communications, Proceedings of the IEEE 86(8): 1756-1768.
[33] Hasanyan D.J., Batra R.C., Harutyunyan S., 2008, Pull-in instabilities in functionally graded micro-thermo electromechanical systems, Journal of Thermal Stresses 31: 1006–1021.
[34] Jia X.L., Yang J., Kitipornchai S., 2010, Characterization of FGM micro-switches under electrostatic and Casimir forces, Materials Science and Engineering 10: 012178.
[35] Zhou L., Tang D., 2007, A functionally graded structural design of mirrors for reducing their thermal deformations in high-power laser systems by finite element method, Optics & Laser Technology 39: 980–986.
[36] Noda N., Jin Z.J., 1993, Steady thermal stresses in an infinite nonhomogenous elastic solid containing a crack, Thermal Stresses 16: 116–181.
[37] Erdogan F., Wu B.H., 1996, Crack problems in FGM layers under thermal stresses, Journal of Thermal Stresses 19: 237–265.
[38] Asghari M., Ahmadian M.T., Kahrobaiyan M.H., Rahaeifard M., 2010, On the size-dependent behavior of functionally graded micro-beams, Journal of Materials and Design 31: 2324–2329.
[39] Martin H., 2009, Sadd, Elasticity, Theory, Applications, and Numerics, Academic Press, second Edition.
[40] Mohammadi-Alasti B., Rezazadeh G., Borgheei A.M., Minaei S., Habibifar R., 2011, On the mechanical behavior of a functionally graded micro-beam subjected to a thermal moment and nonlinear electrostatic pressure, Composite Structures 93: 1516–1525.
[41] Sun Y., Fang D., Soh A.K., 2006, Thermoelastic damping in micro-beam resonators, International Journal of Solids and Structures 43: 3213-3229.
[42] Younis M., Nayfeh A.H., 2003, A study of the nonlinear response of a resonant micro-beam to an electric actuation, Journal of Nonlinear Dynamics 31: 91–117.
[43] Neubrand A., Chung T.J., Steffler E.D., Fett T., Rodel J., 2002, Residual stress in functionally graded plates, Journal of Material Research 17(11): 2912–2920.
[44] Bin J., Wanji C., 2010, A new analytical solution of pure bending beam in couple stress elasto-plasticity, Theory and applications, International Journal of Solids and Structures 47: 779–785.
[45] Abbasnejad B., Rezazadeh G., 2012, Mechanical behavior of a FGM micro-beam subjected to a nonlinear electrostatic pressure, International Journal of Mechanics and Materials in Design, 8:381–392 .
[46] Rezazadeh G., Pashapour M., Abdolkarimzadeh F., 2011, Mechanical behavior of a bilayer cantilever microbeam subjected to electrostatic force, mechanical shock and thermal moment, International Journal of Applied Mechanics, 3(3): 543–561.
[47] Rezazadeh G., Fathalilou M., 2011, Pull-in Voltage of electrostatically-actuated microbeams in terms of lumped model Pull-in Voltage using novel design corrective coefficients, sensing and imaging, AnInternational Journal 12(3-4):117-131.
[48] Bhangale R.K., Ganesan N., Padmanabhan C., 2006, Linear thermoelastic buckling and free vibration behavior of functionally graded truncated conical shells, Journal of Sound and Vibration 292: 341–371.
[49] Yang J., Liew K.M., Wu Y.F., Kitipornchai S., 2006, Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties, International Journal of Solids Structures 43: 307–324.
[50] Ke L.L., Yang J., Kitipornchai S., 2010, Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams, Composite Structures 92: 676–683.
[51] Alibeigloo A., 2010, Thermoelasticity analysis of functionally graded beam with integrated surface piezoelectric layers, Composite Structures 92: 1535–1543.
[52] Anandakumar G., Kim J.H., 2010, On the modal behavior of a three-dimensional functionally graded cantilever beam: Poisson’s ratio and material sampling effects, Composite Structures 92: 1358–1371.
[53] Azizi S., 2008, Design of micro accelerometer to use as airbag activator, MSc thesis, Mechanical Engineering Department, Tarbiat Modares University, Tehran, Iran, 53–54, (in Persian).
[54] Seydel R., 2009, Practical Bifurcation and Stability Analysis, Springer-Verlag New York, LLC, Third Edition.
[55] Kuznetsov Y.A., 1998, Elements of Applied Bifurcation Theory, Springer-Verlag, New York, Second Edition.
