Rubber/Carbon Nanotube Nanocomposite with Hyperelastic Matrix
الموضوعات :M Motamedi 1 , M Moosavi Mashhadi 2
1 - Department of Mechanical Engineering, University of Tehran
2 - Department of Mechanical Engineering, University of Tehran
الکلمات المفتاحية: Hyperelastic, RVE, Polynomial, Carbon Nanotube,
ملخص المقالة :
Anelastomeris apolymerwith the property ofviscoelasticity,generally having notably lowYoung's modulusand highyield straincompared with other materials. Elastomers, in particular rubbers, are used in a wide variety of products ranging from rubber hoses, isolation bearings, and shock absorbers to tires. Rubber has good properties and is thermal and electrical resistant. We used carbon nanotube in rubber and modeled this composite with ABAQUS software. Because of hyperelastic behavior of rubber we had to use a strain energy function for nanocomposites modeling. A sample of rubber was tested and gained uniaxial, biaxial and planar test data and then the data used to get a good strain energy function. Mooney-Rivlin form, Neo-Hookean form, Ogden form, Polynomial form, reduced polynomial form, Van der Waals form etc, are some methods to get strain function energy. Modulus of elasticity and Poisson ratio and some other mechanical properties gained for a representative volume element (RVE) of composite in this work. We also considered rubber as an elastic material and gained mechanical properties of composite and then compared result for elastic and hyperelastic rubber matrix together.
[1] Dresselhaus M.S., Dresselhaus G., Eklund P.C., 1996, Science of Fullerenes and Carbon Nanotubes, Academic Press, San Diego, CA, 756-864.
[2] Iijima S., 1991, Helical microtubules of graphitic carbon, Nature 354: 56-58.
[3] Oberlin A., Endo M., Koyama T., Cryst J., 1976, Filamentous growth of carbon through benzene decomposition, Growth 32: 335-349.
[4] Baughman R.H., Zakhidov A.A., de Heer W.A., 2002, Carbon Nanotubes-the Route toward Applications, Science 297: 787-792.
[5] Treacy M., Ebbesen T.W., Gibson J.M., 1996, Nature 381: 678-689.
[6] Yang Y., Gupta M.C., Zalameda J.N., Winfree W.P., 2008, Dispersion behaviour, thermal and electrical conductivities of carbon nanotube-polystyrene nanocomposites, Micro and Nano Letters, IET 3(2): 35-40.
[7] Meyyappan M., 2005, Carbon Nanotubes Science and Application, NASA Ames Research Center, CRC Press.
[8] Sato Y., Hasegawa K., Nodasaka Y., Motomiya K., Namura M., Ito N., Jeyadevan B., Tohji K., 2008, Reinforcement of rubber using radial single-walled carbon nanotube soot and its shock dampening properties, Carbon 46(11):1509-1512.
[9] Frogley M.D., Ravich Diana, Daniel Wagner H., 2003, Mechanical properties of carbon nanoparticle-reinforced elastomers, Composites Science and Technology 63:1647-1654.
[10] Yeoh O.H., 1993, Some Forms of the Strain Energy Function for Rubber, Rubber Chemistry and Technology 66(5): 754-771.
[11] ABAQUS analysis user’s manual V6.7, Material properties: Hyperelastic model for the rubber.
[12] Franta I., 1989, Elastomers and Rubber Compounding Materials, Elsevier, Amsterdam.
[13] Bokobza L., 2007, Multiwall carbon nanotube elastomeric composites: A review, Polymer 48: 4907-4920.
[14] Liu Y.J., Chen X.L., 2003, Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume element, Mechanics of Materials 35: 69-81.
[15] Dong C., 2008, A modified rule of mixture for the vacuum-assisted resin transfer molding process simulation, Composites Science and Technology 68 (9): 2125-2133.
