Free Vibration and Buckling Analysis of Sandwich Panels with Flexible Cores Using an Improved Higher Order Theory
الموضوعات :K Malekzadeh Fard 1 , H Malek-Mohammadi 2
1 - Department of Mechanical Engineering, Malek Ashtar University, Tehran, Iran
2 - Department of Mechanical Engineering Bu-Ali Sina University, Hamedan, Iran
الکلمات المفتاحية: Free vibration, Buckling, Plate sandwich, Flexible core, Navier’s methods,
ملخص المقالة :
In this paper, the behavior of free vibrations and buckling of the sandwich panel with a flexible core was investigated using a new improved high-order sandwich panel theory. In this theory, equations of motion were formulated based on shear stresses in the core. First-order shear deformation theory was applied for the procedures. In this theory, for the first time, incompatibility problem of velocity and acceleration field existing in Frostig's first theory was solved using a simple analytical method. The main advantage of this theory is its simplicity and less number of equations than the second method of Frostig's high-order theory. To extract dynamic equations of the core, three-dimensional elasticity theory was utilized. Also, to extract the dynamic equations governing the whole system, Hamilton's principle was used. In the analysis of free vibrations, the panel underwent primary pressure plate forces. Results demonstrated that, as plate pre-loads got closer to the critical buckling loads, the natural frequency of the panel tended zero. The results obtained from the present theory were in good correspondence with the results of the most recent papers.
[1] Kameswara Rao M., Desai Y.M., Chitnis M.R., 2001, Free vibrations of laminated beams using mixed theory, Composite Structures 52(2): 149-160.
[2] Kant T., Swaminathan K., 2001, Free vibrations of laminated beams using mixed theory, Composite Structures 53(1): 73-85.
[3] Meunier M., Shenoi R.A., 2001, Dynamic analysis of composite sandwich plates with damping modelled using high-order shear deformation theory, Composite Structures 54(2-3): 243-254.
[4] Nayak A.K., Moy S. S. J., Shenoi R.A., 2002, Free vibration analysis of composite sandwich plates based on Reddy's higher-order theory, Composites Part B: Engineering 33(7): 505-519.
[5] Frostig Y., Thomsen O.H., 2004, High-order free vibration of sandwich panels with a flexible core, International Journal of Solids and Structures 41(5-6): 1697-1724.
[6] Malekzadeh K., Khalili K. M. R., Mittal R. K., 2005, Local and global damped vibrations of plates with a viscoelastic soft flexible core: an improved high-order approach, Journal of Sandwich Structures and Materials 7(5): 431-456.
[7] Frostig Y., Baruch M., 1990, Bending of sandwich beams with transversely flexible core, American Institute of Aeronautics and Astronautics 28(3): 523-531.
[8] Frostig Y., Baruch M., 1994, Free vibrations of sandwich beams with a transversely flexible core: a high order approach, Journal of Sound and Vibration 176(2): 195-208.
[9] Frostig Y., 1998, Buckling of sandwich panels with a flexible core—high-order theory, International Journal of Solids and Structures 35(3): 183-204.
[10] Frostig Y., Thomsen O.H., 2007, Buckling and nonlinear response of sandwich panels with a compliant core and temperature-dependent mechanical properties, Journal of Mechanics of Materials and Structures 2(7): 1355-1380.
[11] Dafedar J.B., Desai Y.M., Mufti A. A., 2003, Stability of sandwich plates by mixed, higher-order analytical formulation, International Journal of Solids and Structures 40(17): 4501-4517.
[12] Pandit M.K., Singh B.N., Sheikh A.H., 2008, Buckling of laminated sandwich plates with soft core based on an improved higher order zigzag theory, Thin-Walled Structures 46(11): 1183-1191.
[13] Ćetković M., Vuksanović D.J., 2009, Bending, free vibrations and buckling of laminated composite and sandwich plates using a layer wise displacement model, Composite Structures 88(2): 219-227.
[14] Yao S., Kuo., Le-Chung Shiau., 2009, Buckling and vibration of composite laminated plates with variable fiber spacing, Composite Structures 90(2): 196-200.
[15] Fiedler L., Lacarbonara W., Vestroni F., 2010, A generalized higher-order theory for buckling of thick multi-layered composite plates with normal and transverse shear strains, Composite Structures 92(12): 3011-3019.
[16] Shariyat M., 2010, A generalized high-order global–local plate theory for nonlinear bending and buckling analyses of imperfect sandwich plates subjected to thermo-mechanical loads, Composite Structures 92(1): 130-143.
[17] Dariushi S., Sadighi M., 2015, Analysis of composite sandwich beam with enhanced nonlinear high order sandwich panel theory, Modares Mechanical Engineering 14(16): 1-8.
[18] Rao M.K., Scherbatiuk K., Desai Y.M., Shah A.H., 2004, Natural vibrations of laminated and sandwich plates, Journal of Engineering of Mechanics 130(11): 1268-1278.
[19] Zhen W., Wanji C., Xiaohui R., 2010, An accurate higher-order theory and C0 finite element for free vibration analysis of laminated composite and sandwich plates, Composite Structures 92(6): 1299-1307.
[20] Zhen W., Wanji C., 2007, Thermo mechanical buckling of laminated composite and sandwich plates using global–local higher order theory, International Journal of Mechanical Sciences 49(6): 712-721.
