Magneto-Thermo-Elastic Behavior of Cylinder Reinforced with FG SWCNTs Under Transient Thermal Field
الموضوعات :
A Ghorbanpour Arani
1
(Department of Mechanical Engineering, Faculty of Engineering, University of Kashan----
Institute of Nano science & Nanotechnology, University of Kashan)
M.R Mozdianfard
2
(Department of Chemical Engineering, Faculty of Engineering, University of Kashan)
V Sadooghi
3
(Department of Mechanical Engineering, Faculty of Engineering, University of Kashan)
M Mohammadimehr
4
(Department of Mechanical Engineering, Faculty of Engineering, University of Kashan)
R Kolahchi
5
(Department of Mechanical Engineering, Faculty of Engineering, University of Kashan)
الکلمات المفتاحية: Perturbation of Magnetic Field Vector, Magneto-thermo-elastic stresses, FG SWCNTs, Cylinder, Transient thermal field,
ملخص المقالة :
In this article, magneto-thermo-elastic stresses and perturbation of magnetic field vector are analyzed for a thick-walled cylinder made from polystyrene, reinforced with functionally graded (FG) single-walled carbon nanotubes (SWCNTs) in radial direction, while subjected to an axial and uniform magnetic field as well as a transient thermal field. Generalized plane strain state is considered in this study. The SWCNTs are assumed aligned, straight with infinite length. Two types of variations in the volume fraction of SWCNTs were considered in the structure of the FG cylinder along the radius from inner to outer surface, namely: functionally graded increasing (FG Inc) and functionally graded decreasing (FG Dec) which are then compared with uniformly distributed (UD) layouts. The constitutive equations of this type of reinforced polymeric cylinder are derived by Mori-Tanaka method. Following the introduction of a second order partial differential equation derived from the equations of motion and stress-strain relationships and solving by a semi-analytical method, distribution of stresses and perturbation of magnetic field vector are obtained. Results indicate that maximum radial and circumferential stresses occur in FG Inc and FG Dec layouts, respectively. Maximum perturbation of magnetic field vector is not affected by UD layout.
[1] Lau K.T., Hui D., 2002, The revolutionary creation of new advanced materials–carbon nanotube composites, Composite Part B: Engineering 33: 263-277.
[2] Lau K.T., Gu C., Gao G.H., Ling H.Y., Reid S.R., 2004, Stretching process of single-and multi walled carbon nanotubes for nano composite applications, Carbon 42:426-428.
[3] Esawi A.M.K., Farag M.M., 2007, Carbon nanotube reinforced composites: potential and current challenges, Materials and Design 28:2394-2401.
[4] Qian D., Dickey E.C., Andrews R.., Rantell T., 2000, Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites, Applied Physics Letters 76: 2868-2870 .
[5] Fidelus J.D., Wiesel E., Gojny F.H., Schulte K., Wagner H.D., 2005,Thermo-mechanical properties of randomly oriented Carbon/epoxy nano composites, Composite Part A: Applied Science and Manufacturing 36:1555-1561 .
[6] Ghorbanpour Arani A., Maghamikia S.H., Mohammadimehr M., Arefmanesh A., 2011, Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods, Journal of Mechanical Science and Technology 25: 809-820.
[7] Shen H.S., 2009, Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments, Composite Structures 91: 9-19.
[8] Ke L.L., Yang J., Kitipornchai S., 2010, Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams, Composite Structures 92:676-683.
[9] Shen H.S., Zhang C.H., 2010, Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates, Materials and Design 31: 3403-3411.
[10] Ding H.J., Wang H.M., Chen W.Q., 2001, A theoretical solution of cylindrically isotropic cylindrical tube for axisym metric plane strain dynamic thermoelastic problem, Acta. Mechanica Solida Sinica. 14: 357-363.
[11] Shi D.L., Feng X.Q., Huang Y.Y., Hwang K.C., Gao H., 2004,The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites, ASME Journal of Engineering Materials and Technology 126:250-257.
[12] Polymer Data Hand Book, 1999, Oxford University Press, Oxford, 828-837.
[13] Hetnarski R.B., Eslami M.R., 2009, Thermal Stresses-Advanced Theory and Applications, Springer.
[14] Nan C.W., Shi Z., Lin Y., 2003, A simple model for thermal conductivity of carbon nanotube-based composites, Chemical Physics Letters 375:666-669.
[15] Peters J.E., Papavassiliou D.E., Grady B.P., 2008, Unique thermal conductivity behavior of single-walled carbon nanotube-polystyrene composites, Macromolecule 41: 7274-7277.
[16] Bi K., Chen Y., Yang J., Wang Y., Chen M., 2006, Molecular dynamics simulation of thermal conductivity of single-walled carbon nanotubes, Physics Letters A 350: 150-153.
[17] Dai H.L., Wang X., 2006, The dynamic response and perturbation of magnetic field vector of orthotropic cylinders under various shock loads, International Journal of Pressure Vessels and Piping 83: 55-62.
[18] Lehtinen P.O., Foster A.S., Ayuela A., Vehvilainen T.T., Nieminen R.M., 2004, Structure and magnetic properties of adatoms on carbon nanotubes, Physical Review B 69: 155422.
[19] Kordkheili S.A.H., Naghdabadi R., 2007, Thermoelastic analysis of a functionally graded rotating disk, Composite Structures 79: 508-516.
