Simulation of Residual Stress and Distortion in Welded Carbon Steel Pipe by Considering Solid-State Phase Transformation
الموضوعات :M. R Jahanban 1 , Saeed Feli 2
1 - Razi University,Kermanshah, Iran
2 - Razi University, Kermanshah,Iran
الکلمات المفتاحية: ABAQUS, Solid-State phase transformation, Welded carbon steel pipe, Welding residual stress, Distortion,
ملخص المقالة :
In this paper, a sequentially coupled 3-D thermal-metallurgical-mechanical analysis is developed to predict welding residual stresses and distortion during single-pass tungsten inert gas arc welding (TIG) of low and medium carbon steel pipes (S45C and S15C). The axial and hoop residual stresses and welding deformation by allowing volumetric change due to solid-state phase transformation are determined. In ABAQUS finite element simulation, the moving heat source is modeled by a user subroutine [DFLUX], and a user subroutine [UEXPAN] is applied for computing the fraction of martensite and volume change during heating and cooling. The simulation results show that for the S15C pipe, solid-state phase transformation has an insignificant effect on welding residual stress and distortion but for the S45C pipe the solid-state phase transformation reduces the axial residual stress in the fusion (FZ) and heat-affected zones (HAZ). Also, the sign of hoop residual stress changes in FZ, and its value of it decreases in HAZ.
[1] Deng.D, Murakawa.Hidekazu, "Prediction of welding residual stress in multi-pass butt-welded modified 9Cr–1Mo steel pipe considering phase transformation effects", Computational Materials Science, 2006; 37:209-219.
[2] A. Yaghi, TH. Hyde, AA. Becker, W. Sun.” Finite element simulation of welding and residual stresses in a P91 steel pipe incorporating solid-state phase transformation and post-weld heat treatment”, J Strain Anal, 2008; 43:275–93.
[3] Dean Deng, Hidekazu Murakawa,” Finite Element Analysis of Temperature Field, Microstructure and Residual Stress in multi-pass butt-welded 2.25Cr-1Mo steel Pipes”, Journal of Computational Materials Science, 2008;43:681-695.
[4] Dean Deng,” FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects”, Journal of Materials and Design, 2009; 30:359-365.
[5] Chin-Hyung Lee, Kyong-Ho Chang.” Prediction of residual stresses in high strength carbon steel pipe weld considering solid-state phase transformation effects”, Computers & Structures, 2011; 89:256-265.
[6] S. Feli; M.E. Aalami Aaleagha; M.R. Jahanban, Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes, Journal of Stress Analysis, 2017; 1(2): 25-33.
[7] Sendong Ren, Suo Li, Yifeng Wang, Dean Deng, Ninshu Ma , Finite element analysis of residual stress in 2.25Cr-1Mo steel pipe during welding and heat treatment process, Journal of Manufacturing Processes, 2019; 47, 110-118.
[8] Obeid Obeid, Anthony J. Leslie, Abdul Ghani Olabi, Influence of girth welding material on thermal and residual stress fields in welded lined pipes, International Journal of Pressure Vessels and Piping, 2022; 200, 104777.
[9] Parviz Asadi , Samaneh Alimohammadi, Omid Kohantorabi, Ali Fazli, Mostafa Akbari, Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316), Thermal Science and Engineering Progress, 2020; 16, 100462
[10] Rajiv Kumar, H. C. Dey, A. K. Pradhan, K. Albert, J. G. Thakre, M. M. Mahapatra C. Pandey, Numerical and experimental investigation on distribution of residual stress and the influence of heat treatment in multi-pass dissimilar welded rotor joint of alloy 617/10Cr steel, International Journal of Pressure Vessels and Piping, 2022; 199, 104715
[11] J. Goldak, A. Chakravarti, M. Bibby, Metallurgical Transactions B, 1984; 299-305
[12] D. Deng, Y. Luo, H. Serizawa, M. Shibahara, H. Murakawa, JWRI, 2003; 32 (2) 325–333.
[13] Zhang w, Elmer JW, DebRoy T. Modeling and real time mapping of phase during GTA welding of 1005 steel. Marter Sci Eng A2002; 333:320-5.
[14] B. Brickstad, B. L. Josefson, “A Parametric Study of Residual Stresses in Multi-pass Butt-welded Stainless Steel Pipes” Int. J. of Pressure Vessels and Piping, 1998; 75(1):11-25.
[15] SH. Cho, JW. Kim,” Analysis of residual stress in carbon steel weldment incorporating phase transformation” Sci Technol Weld Join, 2002; 4:212-6.
[16] DP. Koistinen, RE. Marburger, “A general equation prescribing extent of austenite–martensite transformation in pure iron + zarbon alloys and carbonsteels” Acta Metall, 1959; 7:59–60.
[17] METEQ Ver1.2 CD-ROM, The Society of Material Science, Japan; 2002.
[18] D. Deng, H. Murakawa, Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements, Comp. Mater. Sci., 37(3) (2006) 269-277.
[19] Bhadeshia HKDH, “Developments in martensitic and bainitic steels, role of the shape deformation”, Mater Sci Eng A, 2004; P.9-34.
