Comparative Analysis of Energy Absorption Capacity of Single and Nested Metal Matrix Composite Tubes Under Quasi-Static Lateral and Axial Loading
الموضوعات :
S Dehghanpour
1
(Department of Mechanics, Tuyserkan Branch, Islamic Azad University, Tuyserkan, Iran)
K Hosseini Safari
2
(Department of Mechanical Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran)
F Barati
3
(Department of Mechanical Engineering, Hamedan Branch, Islamic Azad University, Hamedan, Iran)
M.M Attar
4
(Department of Mechanical Engineering, Hamedan Branch, Islamic Azad University, Hamedan, Iran)
الکلمات المفتاحية: Metal matrix composite, Nested tube systems tubes, energy absorption, Quasi-static loading,
ملخص المقالة :
In this paper the behavior of nested tube systems under quasi-static compressive loading is investigated. Two nested tube systems with metal matrix composite are subjected to compressive loads so that in the system A the exterior and interior tubes are under axial and lateral loads, respectively but in the system B the exterior and interior tubes are under lateral and axial loads, respectively. Furthermore, these systems behavior are studied numerically. The results show that energy absorption capacity for both of nested tube systems is greater than the sum of energy absorption capacities of two constitutive tubes when loaded individually. Also, it is shown that the absorbed energy for system A is greater than that of system B. In this research the effects of section geometry and the condition of loading (axial or lateral)of thin-walled tubes on energy absorption capacity and the value of the peak load are studied both experimentally and numerically.
[1] Alexander J. M., 1960, An approximate analysis of the collapse of thin cylindrical shells under axial loading, Journal of Mechanics and Applied Mathematics 13(1): 10-15.
[2] Pugsley Sir A., Macaulay M.,1960, The large scale crumpling of thin cylindrical columns, Journal of Mechanics and Applied Mathematics 13: 1-9.
[3] Pussley Sir A.,1960, The crumpling of tubular structures under impact conditions, Proceedings of the Symposium on The Use of Aluminum in Railway Rolling Stock Institute of Locomotive Engineers, The Aluminum Development Association, London.
[4] Mamalis A. G., Johnson W.,1983, The Quasi-static crumpling of thin-walled circular and frusta under axial compression, International Journal of Mechanical Sciences 25(9/10): 713-732.
[5] Abramowicz W.,1983, The effective crushing distance in axially compressed thin walled metal columns, International Journal of Impact Engineering 1(3): 309-317.
[6] Abramowicz W., Jones N.,1984, Dynamic axial crushing of circular tubes, International Journal of Impact Engineering 2(3): 263-281.
[7] Abramowicz W., Jones N.,1986, Dynamic progressive buckling of circular and square tubes, International Journal of Impact Engineering 4(4): 243-270.
[8] Mamalis A. G., Manolakos D.E., Saigal S., Viegelahn G., Johnson W., 1986, Extensible plastic collapse of thin-walled frusta as energy absorber, International Journal of Mechanical Sciences 28(4): 219-229.
[9] Bardi F. C., Yun H.D., Kyriakides S.,2003, On the axisymmetric progressive crushing of circular tubes under axial compression, International Journal of Solids and Structures 40: 3137-3155.
[10] Sedghi M., Alavi Nia A., Labbafi H., Atmri P.,2008, Effect of circumferential gFooves geometries on crashworthiness of ax axially loaded cylindrical tubes, 16th Annual and 12th International Conference Mechanical Engineering, Bahonar University, Kerman, Iran.
[11] Kheirikhah M.M , Dehghanpour S. , Rahmani M.,2016, Quasi-static axial compression of thin-walled circular composite tubes, Journal of Structural Engineering and Geo-Techniques 6(1): 9-13.
[12] Rihuan L.,Xianghua L.,Shoudong C.,Xianlei H.,Lizhong L., 2017, Axial crashing analysis for tailor rolled square tubes with axially graded both wall thickness and material strength,Thin-Walled Structures 117: 10-24.
[13] ZhangY.,Xu X.,Wang J.,Chen T.,Wang C.H.,2018, Crushing analysis for novel bio-inspired hierarchical circular structures subjected to axial load, International Journal of Mechanical Sciences 140: 407-431.
[14] Mutchler L. D.,1960, Energy absorption of aluminum tubes, Journal of Applied Mechanics 27(4): 740- 743.
[15] Deruntz V. A. , Hodge P.G., 1963,Crushing of a tube between rigid plates, Journal of Applied Mechanics 30: 391-398.
[16] Reid S. R., Reddy T.Y.,1978, Effects of strain hardening on the lateral compression of tube between rigid plates, International Journal of Solids and Structures 14(3): 213-225.
[17] Reddy T. Y., Reid S.r.,1979, Lateral compression of tubes and tube-system with side constrains, International Journal of Mechanical Sciences 21(3): 187-199.
[18] Gupta N. K., Sekhon G.S., Gupta P.K., 2005, Study of lateral compression of round metallic tube, Thin-Walled Structures 43: 895-922.
[19] Morris E., Olabi A.G., Hashmi M.J., 2005, Analysis of nested tubes type energy absoMrs with different indenters and exterior constraints, Thin-Walled Structures 44: 827-885.
[20] Dehghanpour S., Yousefi A., 2012, Lateral crushing of square and rectangular metallic tubes under different quasi-static conditions, World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 6(1): 628-632.
[21] Fan Z., 2013, Dynamic lateral crushing of empty and sandwich tubes, International Journal of Impact Engineering 53: 3-16.
[22] Baroutaji A.,2015, Analysis and optimization of sandwich tubes energy absorbers under lateral loading, International Journal of Impact Engineering 82: 74-88.
[23] Baroutaji A., Olabi A.G,2014, Lateral collapse of short length sandwich tubes compressed by different indenters and exposed to external constraints, Materialwissenschaft Werkstofftechnik 45(5): 371-384.
[24] Morris E., Olabi A., Hashmi M., 2007, Lateral crushing of circular and non-circular tube systems under quasi-static conditions, Journal of Materials Processing Technology 191(1): 132-135.
[25] Olabi A.,Morris E.,Hashmi S.,Gilchrist M., 2008, Optimised design of nested oblong tube energy absorbers under lateral impact loading, International Journal of Impact Engineering 35(1): 10-26.
[26] Olabi A.,Morris E.,Hashmi S.,Gilchrist M., 2008,Optimised design of nested circular tube energy absorbers under lateral impact loading, International Journal of Mechanical Sciences 50(1): 104-116.
[27] Haibo W., Jialing Y., Hua L., Yuxin S., T.X. Yu., 2015, Internally nested circular tube system subjected to lateral impact loading,Thin-Walled Structures 91: 72-81.
[28] Dehghanpour S. , Khalili H. , Hoseini-Safari K. , Mohammad Y., 2015, Experimental and numerical investigation of lateral loading of thin–walled tube with different indenter, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering 8(3): 173-184.
[29] Baroutaji A., Gilchrist M.D. , Olabi A.G., 2016, Quasi-static impact and energy absorption of internally nested tubes subjected to lateral loading, Thin-Walled Structures 98: 337-350.
