On the Optimum Die Shape in Rod Drawing Process Considering Work-Hardening Effect of Material
الموضوعات :
M.M Mahdavi
1
(Mechanical Engineering Department, Razi University, Kermanshah, Iran)
H Haghighat
2
(Mechanical Engineering Department, Razi University, Kermanshah, Iran)
الکلمات المفتاحية: Work-hardening, Upper bound analysis, Rod drawing,
ملخص المقالة :
The assessment of the influence of the work-hardening of material on the optimum die profile and drawing force in rod drawing process is the main objective of the present paper. The upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the rod drawing process through curved dies. Analytical results of drawing forces for rod drawing process through four different types of streamlined die profiles are compared with the finite element simulation data using the finite element code, DEFORM 2D. It is shown that as the work-hardening exponent increases, the optimum die length increases, the required drawing force decreases and maximum possible reduction in area increases. Based on this proposed modeling technique, drawing process of real materials through various curved dies can be optimized.
[1] Avitzur B., 1963, Analysis of wire drawing and extrusion through conical dies of small cone angle, ASME Journal of Engineering for Industry 85: 89-96.
[2] Avitzur B., 1964, Analysis of wire drawing and extrusion through conical dies of large cone angle, ASME Journal of Engineering for Industry 86: 305-316.
[3] Chen C.T., Ling F.F., 1968, Upper bound solutions to axisymmetric extrusion problems, International Journal of Mechanical Sciences 10: 863-879.
[4] Chen C.C., Oh S.I., Kobayashi S., 1977, Ductile fracture in axisymmetric extrusion and drawing-Part I: Deformation mechanics of extrusion and drawing metal, ASME Journal of Engineering for Industry 101: 369-377.
[5] Chevalier L., 1992, Prediction of defects in metal forming: application to wire drawing, Journal of Materials Processing Technology 32: 145-153.
[6] Devenpeck M.L., Richmond O., 1965, Strip drawing experiments with a sigmoidal die profile, ASME Journal of Engineering for Industry 87: 425-428.
[7] Chen D.C., Huang J.Y., 2007, Design of brass alloy drawing process using Taguchi method, Materials Science and Engineering 464: 135-140.
[8] Gordon W. A., Van Tyne C. J., Moon Y. H., 2007a, Axisymmetric extrusion through adaptable dies-Part 1: Flexible velocity fields and power terms, International Journal of Mechanical Sciences 49: 86-95.
[9] Gordon W. A., Van Tyne C. J., Moon Y. H., 2007b, Axisymmetric extrusion through adaptable dies- Part 2: Comparison of velocity fields, International Journal of Mechanical Sciences 49: 96-103.
[10] Gordon W.A., Van Tyne C. J., Moon Y. H., 2007c, Axisymmetric extrusion through adaptable dies-Part 3: Minimum pressure streamlined die shapes, International Journal of Mechanical Sciences 49: 104-115.
[11] Gonzalez R.H.A., Calvet J.V., Bubnovich V.I., 2008, A new analytical solution for prediction of forward tension in the drawing process, Journal of Materials Processing Technology 198: 93-98.
[12] Gunasekera J.S., Gegel H.L., Malas J.C., Doraivelu S.M., Barker D., 1984, CAD/CAM of streamlined extrusion dies, Journal of Applied Metalworking 4: 43-49.
[13] Liu T.S., Chung N.L., 1990, Extrusion analysis and workability prediction using finite element method, Computers and Structures 36: 369-377.
[14] Lu Y.H., Lo S.W., 1999, An advanced model of designing controlled strain rate dies for axisymmetric extrusion, Journal of Materials and Engineering Performance 8: 51-60.
[15] Luis C.J., Leon J., Luri R., 2005, Comparison between finite element method and analytical methods for studying wire drawing processes, Journal of Materials Processing Technology 164-165:12181225.
[16] Nagpal V., 1974, General kinematically admissible velocity fields for some axisymmetric metal forming problems, ASME Journal of Engineering for Industry 96: 1197-1201.
[17] Ponalagusamy R., Narayanasamy R., Srinivasan P., 2005, Design and development of streamlined extrusion dies: A Bezier curve approach, Journal of Materials Processing Technology 161: 375-380.
[18] Panteghini A., Genna F., 2010, An engineering analytical approach to the design of cold wire drawing processes for strain-hardening materials, International Journal of Materials Forming 3: 279-289
[19] Panteghini A., 2014, An analytical solution for the estimation of the drawing force in three dimensional plate drawing processes, International Journal of Mechanical Sciences 84: 147-157.
[20] Rubio Alvir E.M., Sebastian P.M.A., Sanz L.A., 2003, Mechanical solutions for drawing processes under plane strain conditions by the upper bound method, Journal of Materials Processing Technology 143-144: 539-545.
[21] Rubio Alvir E.M., Mariin M., Domingo R., Sebastian P.M.A., 2009, Analysis of plate drawing processes by the upper bound method using theoretical work-hardening materials, International Journal of Advanced Manufacturing Technology 40: 261-269.
[22] Richmond O., Devenpeck M. L., 1962, A die profile for maximum efficiency in strip drawing, Proceedings of the Fourth US National Congress of Applied Mechanics ASME1962, New York.
[23] Yang D.Y., Han C.H., Lee B.C., 1985, The use of generalized deformation boundaries for the analysis of axisymmetric extrusion through curved dies, International Journal of Mechanical Sciences 27: 653-663.
[24] Yang D.Y., Han C.H., 1987, A new formulation of generalized velocity field for axisymmetric forward extrusion through arbitrarily curved dies, ASME Journal of Engineering for Industry 109: 161-168.
[25] Zhao D.W., Zhao H.J., Wang G.D., 1995, Curvilinear integral of the velocity field of drawing and extrusion through elliptic die profile, Transaction of Nonferrous Metals Society of China 5: 79-83.
[26] Zhang S.H., Chen X.D., Zhou J., Zhao D.W., 2016, Upper bound analysis of wire drawing through a twin parabolic die, Meccanica 51: 2099-2110.
