Analytical Stress Solutions of an Orthotropic Sector Weakened by Multiple Defects by Dislocation Approach
الموضوعات :
A.R Hassani
1
(Young Researchers and Elite Club, Hashtgerd Branch, Islamic Azad University, Alborz, Iran)
A Hassani
2
(Young Researchers and Elite Club, Hashtgerd Branch, Islamic Azad University, Alborz, Iran)
الکلمات المفتاحية: Orthotropic, Anti-plane, Stress intensity factor, Hoop stress, Sector,
ملخص المقالة :
In this article, the anti-plane deformation of an orthotropic sector with multiple defects is studied analytically. The solution of a Volterra-type screw dislocation problem in a sector is first obtained by means of a finite Fourier cosine transform. The closed form solution is then derived for displacement and stress fields over the sector domain. Next, the distributed dislocation method is employed to obtain integral equations of the sector with cracks and cavities under anti-plane traction. These equations are of Cauchy singular kind, which are solved numerically by generalizing a numerical method available in the literature by means of expanding the continuous integrands of integral equations with different weight functions in terms of Chebyshoff and Jacobi polynomials. A set of examples are presented to demonstrate the applicability of the proposed solution procedure. The geometric and force singularities of stress fields in the sector are also studied and compared to the earlier reports in the literature.
[1] Kargarnovin M., Shahani A., Fariborz S., 1997, Analysis of an isotropic finite wedge under antiplane deformation, International Journal of Solids and Structures 34: 113-128.
[2] Kargarnovin M., Fariborz S., 2000, Analysis of a dissimilar finite wedge under antiplane deformation, Mechanics Research Communications 27: 109-116.
[3] Shahani A.R., 1999, Analysis of an anisotropic finite wedge under antiplane deformation, Journal of Elasticity 56:17-32.
[4] Shahani A.R., 2003, Mode III stress intensity factors for edge-cracked circular shafts, bonded wedges, bonded half planes and DCB’s, International Journal of Solids and Structures 40: 6567-6576.
[5] Lin R.-L., Ma C.-C., 2004, Theoretical full-field analysis of dissimilar isotropic composite annular wedges under anti-plane deformations, International Journal of Solids and Structures 41: 6041-6080.
[6] Chen C.-H., Wang C.-L., 2009, A solution for an isotropic sector under anti-plane shear loadings, International Journal of Solids and Structures 46: 2444-2452.
[7] Mkhitaryan S.M., Melkoumian N., Lin B.B., 2001, Stress-strain state of a cracked elastic wedge under anti-plane deformation with mixed boundary conditions on its faces, International Journal of Fracture 108: 291-315.
[8] Faal R., Fotuhi A., Fariborz S., Daghyani H., 2004, Antiplane stress analysis of an isotropic wedge with multiple cracks, International Journal of Solids and Structures 41: 4535-4550.
[9] Faal R., Fariborz S., Daghyani H., 2007, Stress analysis of a finite wedge weakened by cavities, International Journal of Mechanical Sciences 49: 75-85.
[10] Shahani A.R., Ghadiri M., 2010, Analysis of anisotropic sector with a radial crack under anti-plane shear loading, International Journal of Solids and Structures 47:1030-1039.
[11] Liebowitz H., Lee J.D., Eftis J., 1978, Biaxial load effects in fracture mechanics, Engineering Fracture Mechanics 10: 315-335.
[12] Faal R.T., Hassani A.R., Milani A.S., 2012, Stress analysis of transversely isotropic sectors weakened by multiple defects, International Journal of Solids and Structures 49: 3627-3640.
[13] Faal R.T., Pasrad A., 2013, Stress analysis of two kinds of dissimilar isotropic sectors, Mathematics and Mechanics of Solids 18: 543-555.
[14] Lekhnit͡skiĭ S.G., 1963, Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day.
[15] Weertman J., Weertman J.R., Friedel J., Rhodes R.G., 1965, Elementary dislocation theory, tislocations and imperfections and active centers in semiconductors, American Journal of Physics 33: 1091-1093.
[16] Delale F., 1984, Stress singularities in bonded anisotropic materials, International Journal of Solids and Structures 20: 31-40.
[17] Erdogan F., Gupta G.D., Cook T.S., 1973, Numerical Solution of Singular Integral Equations, Springer Netherlands, Dordrecht.
[18] Faal R.T., Fariborz S.J., Daghyani H.R., 2006, Antiplane deformation of orthotropic strips with multiple defects, Journal of Mechanics of Materials and Structures 1: 1097-1114.
