Study of the Effect of an Open Transverse Crack on the Vibratory Behavior of Rotors Using the h-p Version of the Finite Element Method
الموضوعات :F Ahmed 1 , H Abdelhamid 2 , B Brahim 3 , S Ahmed 4
1 - IS2M Laboratory, Faculty of Technology, University of Tlemcen, Algeria
2 - IS2M Laboratory, Faculty of Technology, University of Tlemcen, Algeria
3 - IS2M Laboratory, Faculty of Technology, University of Tlemcen, Algeria
4 - IS2M Laboratory, Faculty of Technology, University of Tlemcen, Algeria
الکلمات المفتاحية: h-p version of FEM, Rotor, Open transverse crack, Time-varying stiffness,
ملخص المقالة :
In this paper, we use the hybrid h-p version of the finite element method to study the effect of an open transverse crack on the vibratory behavior of rotors, the one-dimensional finite element Euler-Bernoulli beam is used for modeling the rotor, the shape functions used are the Hermite cubic functions coupled to the special Legendre polynomials of Rodrigues. The global matrices of the equation of motion of the cracked rotor are derived by the application of the Lagrange equation taking into account the local variation in the shaft’s stiffness due to the presence of the crack, and the stiffness of the cracked element of the shaft are determined using the time-varying stiffness method. Numerical results generated by a program developed in MATLAB show the rapidity of the convergence of the h-p version of FEM compared to the classical version, after the validation of our results with theoretical and experimental results and other obtained with the simulator ANSYS Workbench, a parametric study was provided to show the influence of the depth and position of the crack on the vibratory behavior of a symmetrical and asymmetrical rotor.
[1] Gallagher R.H., 1975, Finite Element Analysis: Fundamentals, Prentice Hall Civil Engineering and Engineering Mechanics, Pearson College Div.
[2] Zienkiewicz C., 1977, The Finite Element Method, McGraw-Hill.
[3] Szabo B.A., 1979, Some recent developments in the finite element analysis, Computers & Mathematics Applications, 5(2): 99-115.
[4] Babuška I., Szabo B.A., Katz I.N., 1981, The p-version of the finite element method, SIAM Journal on Numerical Analysis 18(3): 515-545.
[5] Meirovitch L., Bahuh H., 1983, On the inclusion principle for the hierarchical finite element method, International Journal for Numerical Methods in Engineering 19: 281-291.
[6] Gui W., Babuška I., 1986, The h, p and h-p versions of the finite element method in 1 dimension, part I, The error analysis of the p-version, Numerische Mathematik 49(6): 577-612.
[7] Babuška I., Suri M., 1987, The h-p version of the finite element method with quasi uniform meshes, Mathematical Modeling and Numerical Analysis 21(2): 199-238.
[8] Babuška I., Guo B.Q., 1992, The h, p and h-p version of the finite element method: Basis theory and applications, Advances in Engineering Software 15 (3-5): 159-174.
[9] Boukhalfa A., Hadjoui A., 2010, Free vibration analysis of an embarked rotating composite shaft using the h-p version of the FEM, Latin American Journal of Solids and Structures 7(2): 105-141.
[10] Saimi A., Hadjoui A., 2016, An engineering application of the h-p version of the finite elements method to the dynamics analysis of a symmetrical on-board rotor, European Journal of Computational Mechanics 25(5): 1779-7179.
[11] Wauer J., 1990, Dynamics of cracked rotors: literature survey, Applied Mechanics Reviews 43(1): 13-17.
[12] Dimarogonas A.D., 1996, Vibration of cracked structures: a state of the art review, Engineering Fracture Mechanics 55(5): 831-857.
[13] Sabnavis G., Kirk R.G., Kasarda M., Quinn D.D., 2004, Cracked shaft detection and diagnostics: a literature review, The Shock and Vibration Digest 36(4): 287-296.
[14] Gasch R., 1993, A survey of the dynamic behavior of a simple rotating shaft with a transverse crack, Journal of Sound and Vibration 160: 313-332.
[15] Edwards S., Lees A. W., Friswell M. I., 1998, Fault diagnosis of rotating machinery, The Shock and Vibration Digest 30: 4-13.
[16] Davies W. G. R., Mayes I. W., 1984, The vibration behavior of a multi-shaft, multi-bearing system in the presence of a propagating transverse crack, Journal of Vibration, Acoustics, Stress, and Reliability in Design 106: 146-153.
[17] Chasalevris A.C., Papadopoulos C.A., 2008, Coupled horizontal and vertical vibrations of a stationary shaft with two cracks, Journal of Sound and Vibration 309: 507-528.
[18] Mazanoglu K., Yesilyurt I., Sabuncu M., 2009, Vibration analysis of multiple-cracked non-uniform beams, Journal of Sound and Vibration 320(4–5): 977-989.
[19] Darpe A.K., Gupta K., Chawla A., 2004, Transient response and breathing behaviour of a cracked Jeffcott rotor, Journal of Sound and Vibration 272: 207-243.
[20] Petal T.H., Darpe A.K., 2008, Influence of crack breathing model on nonlinear dynamics of a cracked rotor, Journal of Sound and Vibration 311: 953-972.
[21] AL-Shudeifat M.A., Eric A., Butcher Carl R.S., 2010, General harmonic balance solution of a cracked rotor-bearing-disk system for harmonic and sub-harmonic analysis: Analytical and experimental approach, International Journal of Engineering Science 48: 921-935.
[22] Huang S.C., Huang Y.M., Shiah S.M., 1993, Vibration and stability of a rotating shaft containing a transverse crack, Journal of Sound Vibration 162: 387-401.
[23] Sinou J-J., 2007, Effects of a crack on the stability of a non-linear rotor system, International Journal of Non-Linear Mechanics 42(7): 959-972.
[24] Guo C., AL-Shudeifat M.A., Yan J., Bergman L.A., McFarland D.M., Butcher E.A., 2013, Stability analysis for transverse breathing cracks in rotor systems, European Journal of Mechanics and Solids 42: 27-34.
[25] AL-Shudeifat M.A., 2015, Stability analysis and backward whirl investigation of cracked rotors with time-varying stiffness, Journal of Sound and Vibration 348: 365-380.
[26] Dimarogonas A.D., Papadopoulos C.A., 1983, Vibration of cracked shafts in bending, Journal of Sound and Vibration 91(4): 583-593.
[27] Silani M., Ziaei-Rad S., Talebi H., 2013, Vibration analysis of rotating systems with open and breathing cracks, Applied Mathematical Modeling 37(24): 9907-9921.
[28] AL-Shudeifat M.A., 2013, On the finite element modeling of an asymmetric cracked rotor, Journal of Sound and Vibration 332(11): 2795-2807.
[29] Qinkai H., Fulei C., 2013, Dynamic response of cracked rotor-bearing system under time-dependent base movements, Journal of Sound and Vibration 332(25): 6847-6870.
[30] Sinou J-J., Lees A.W., 2005,The influence of cracks in rotating shafts, Journal of Sound and Vibration 285(4-5): 1015-1037.
[31] AL-Shudeifat M.A., Butcher E.A., 2011, New breathing functions for the transverse breathing crack of the cracked rotor system: approach for critical and subcritical harmonic analysis, Journal of Sound and Vibration 330(3): 526-544.
[32] Guo C., AL-Shudeifat M.A., Yan J., Bergman L.A., McFarland D.M., Butcher E.A., 2013, Stability analysis for transverse breathing cracks in rotor systems, European Journal of Mechanics and Solids 42: 27-34.
[33] Pilkey W.D., 2002, Analysis and Design of Elastic Beams, John Wiley and Sons, New York.
[34] Bardell N.S., 1996, An engineering application of the h-p version of the finite element method to the static analysis of a Euler-bernoulli beam, Computers & Structures 59(2): 195-211.
