Evaluation of the Application of Non-Destructive Tests in Investigating the Defects of Gas Turbine Blades and Using Thermography Method as an Alternative Method
الموضوعات : Journal of Environmental Friendly Materials
R Hedayatnejad
1
(MAPNA Turbine Blade Engineering and Manufacturing Co., Karaj, Iran)
S Farhadi
2
(MAPNA Turbine Blade Engineering and Manufacturing Co., Karaj, Iran)
الکلمات المفتاحية:
ملخص المقالة :
Blades of a gas turbine are the main and most important parts of turbine machines that work in very difficult and complex conditions. Existence of discontinuities and defects in the structure of these parts cause sudden and irreparable damage. It can completely take a turbine out of operation and impose huge costs on a power plant. Therefore, pre-installation controls and inspections for these parts are of great importance. One of the safest and most reliable methods of control and inspection is the use of non-destructive tests. One of the methods that has been considered in recent years is the use of infrared waves, which in this method; Surface defects and sometimes even internal defects can be detected by using infrared cameras that operate within a certain range of the electromagnetic wave spectrum (0.8-14 nm). In this paper, we try to review the conventional methods of non-destructive testing that are used in troubleshooting blades of gas turbines, and the method of using infrared waves as an alternative method to conventional methods to be discussed.
[1] J. Pitkanen, T. Hakkarainen, H. Jeskanen, P. Kuusinen, K. Lahdenpera, P. Sarkiniemi, M. Kemppainen and M. Pihkakoski, Insight-Wigston Then Northampton- 43, No. 9 (2001), 601.
[2] C. Meola, G. M. Carlomagno, M. Di Foggia and O. Natale, Appl. Phys. A, 91, No. 4 (2008), 685.
[3] Steven M. Shepard Ph.D., 2011,"Thermography of Turbine Airfoil". www.thermalwave.com, Quality Magazine.
[4] X. P. V. Maldague, "Introduction to NDT by Active Infrared Thermography." Mater. Eval., 60, No. 9 (2002), 1060.
[5] C. Ibarra-Castanedo, B. Abdelhakim and Xavier P. V. Maldague, In 5th Pan American Conference for NDT, Cancun, Mexico. 2011.
[6] Q0031100 Procedure for Nondestructive Testing, "Fluorescent Penetrant Testing of Gas Turbine Blades and Vanes". General Instruct., Siemens Specif.
[7] H. Glavaš, M. Hadzima-Nyarko, I. Haničar Buljan and T. Barić, Buildings 9, No. 2 (2019), 32.
[7] Exemplary view of FPI indications of GT V94.2 Turbine airfoils and evaluation according to Siemens specifications.
[8] M. Hain, J. Bartl and V. Jacko, In Proc. of the 7th International Conference on Measurement, Bratislava, Inst. Meas. Sci. SAS, 2009, 339.
[8] Q0031200 procedure for nondestructive testing, "Visual and Optical testing of gas turbine blades and vanes". General Instruct., Siemens Specif.
[9] S. Vedula, "Infrared thermography and ultrasonic inspection of adhesive bonded structures, Overview and Validity." (2010).
[10] H. Sanati, D. Wood, and Q. Sun., Appl. Sci., 8, No. 10 (2018), 2004.
[11] F. Ciampa, P. Mahmoodi, F. Pinto and M. Meo, Sensors 18, No. 2 (2018), 609.
[12] Gia Phuong Tran, "Crack Inspection and Simulations with Eddy Current Thermography for the Aerospace Industry." (2013).
[13] J. Pitkanen, T. Hakkarainen, H. Jeskanen, P. Kuusinen, K. Lahdenpera, P. Sarkiniemi, M. Kemppainen and M. Pihkakoski., Insight-Wigston Then Northampton- 43, No. 9 (2001), 601.
[14] A. M. Kolagar, M. Cheraghzadeh, D. Akbari and M. Farahani. NDT Technol. 2, No. 6, (2020), 46.
[15] Y. Guo and F. R. Ruhge, In AIP Conf. Proc. Am. Insts. Phys., Vol. 1096, No. 1, 2009, 1848.
[16] J. Vrana and M. Goldammer, Conf. Thermografie-Anwenderkonferenz, Munich, Germany, (2017).
[17] J. Vrana, M. Goldammer, J. Baumann, M. Rothenfusser and W. Arnold, AIP Conf. Proc., 975, (2008), 475.
[18] C. Homma, “Untersuchungen zu Mechanismus und technischer Umsetzung der akustischen Thermographie”, Shaker, Herzogenrath (2009).
[19] M. Rothenfusser and C. Homma, AIP Conf. Proc. 760, (2005), 624.
