The Challenges of Aluminum Recycling From End-of-Life Vehicles
الموضوعات : Journal of Environmental Friendly Materials
1 - Department of Materials Science, Islamic Azad University, Saveh Branch, Saveh, Iran.
الکلمات المفتاحية:
ملخص المقالة :
The use of aluminum in automotive industry is expanding. Aluminum offers a lower weight alternative to steel, potentially increasing the efficiency of vehicles. However, the application of aluminum has been only in select areas of use, most notably cast aluminum in the engine, transmission, and wheels. Other areas offer the potential for growth that could significantly expand the amount of aluminum used in vehicles. Cost is the main barrier to increased aluminum use. Related to cos aluminum production technologies that are not yet advanced enough to produce aluminum components at low enough price points for aluminum to compete with traditional automotive materials. The amount of aluminum used in cars and light trucks is growing steadily. However, without new developments in aluminum recycling technologies, sheet from automotive aluminum could eventually flood all current markets for recycled aluminum. Environment-friendly production of automobiles is an important research subject for auto-maker companies. Production rate of automobiles increase yearly and therefore End-of-Life Vehicles (ELVs) increase. Companies who produce metallic parts have special view on ELVs as raw materials. To reach required product qualities with lowest costs, aluminum postconsumer scrap is currently recycled using strategies of downgrading and dilution, due to difficulties in refining. These strategies depend on a continuous and fast growth of the bottom reservoir of the aluminum downgrading cascade, which is formed by secondary castings, mainly used in automotive applications. With the global warming of concern, the secondary aluminum stream is becoming an even more important component of aluminum production and is attractive because of its economic and environmental benefits. Recycling of ferrous metals are easier because of separation by magnetic condition and recycling technologies. Non – ferrous metals have wide range of chemical analysis and require special technologies for separation from other metals so special look is necessary to recycling this type of metals. Effective strategies need to include an immediate and rapid penetration of dramatically improved scrap sorting technologies for end-of-life vehicles and other aluminum applications. This article concern the benefits and limitations and the challenges in direction of recycling of aluminum parts from used cars.
[1] J. CUI, H. J. Roven, Trans. Nonferrous Metal. Soc. China., 20(2010), 2057.
[2] G. Rombach, Integrated assessment of primary and secondary aluminum production Surrey, DMG Business Media. Ltd., (1998).
[3] Ducker Worldwide. 2009 Update on North American: light vehicle aluminum content compared to the other countries and regions of the world (phase II), (2008).
[4] P. Zapp, S. W. Kuckshinrichs, The future of automotive aluminum, TMS Annual Meeting., Seattle, (2002), 1003.
[5] R.T. Paul, The success of vehicle recycling in North America, TMS Annual Meeting., Orlando, (2007), 1115.
[6] A. Gessing, JOM, 56(2004), 18.
[7] European Commission Directorate-General Environment., End-of-life vehicles, Influence of production costs on recycling rates, Science for Environmental Policy - News Alert, 282, 2012.
[8] Global Aluminum Recycling, A Cornerstone of Sustainable Development, International Aluminum Institute Report, 2016
[9] Scrap Specifications Circular, Institute of Scrap Recycling Inc., 2016
[10] F. Nicolli, N. Johnstone and P. Söderholm, Environ. Econ. Pol. Stud., 14( 2012), 261.
[11] J. A. Pomykala, B. J. Jody, E. J. Danielse and J. S. Spangenberger, JOM, 59(2007), 41.
[12] M. Zolezzi, C. Nicolelia, C. I. Ferrara and M. Rovatti, Waste Manage., 24(2004), 691.
[13] P.B. Schultz, R.K. Wyss, Chemical treatment of aluminum alloys to enable alloy separation, EU0861910A2 [P]. 1998.
[14] A. Gesing, R. Wolanski, JOM, 53(2001), 21.
[15] S. Bell, B. Davis, A. Javid, E. Essadiqi, Final report on scrap management, sorting and classification of aluminum, Natural Resources Canada Report, (1999).
[16] G. Lazzaro, C. Atzori, TMS Annual Meeting., Warrendale, PA, (1992), 1230.
[17] M. Samuel, J. Mater. Process. Technol., 135(2003), 117.
[18] W. Pietsch, TMS Annual Meeting., Warrendale, (1995), 1120.
[19] R.A. Schulz, Metal bulletin, 14th int. aluminum conf., Montreal, Canada. (1999).
[20] L. Gorban, M.B. Tessieri, J. Mater. Manu., 103(1994), 17.
[21] J. Che, J.S. Yu, R.S. Kevin, J. Environ. Sci., 23(2011), 5162.
[22] M. A. Ilgin, S.M. Gupta, J. Environ. Manage., 91(2010), 563.
[23] S.I. Sakai, Y. Noma, A. Kida , J. Mater. Cycles. Waste., 9(2007), 151.
[24] M. Samuel, J. Mater. Process. Technol., 135(2003), 117.
[25] A.E. Tekkaya, M. Schikkorra, D. Becker, D. Biermann, N. Hammer and K. Pantke, J. Mater. Process. Technol., 209(2009), 3343.
[26] J. Gronostajski, A. Matuszak, J. Mater. Process. Technol., (1999), 35.
