Investigation of the Drug Delivery Potential of a Transdermal Patch Based on Buprenorphine Templated Molecular Imprinted Polymer

الموضوعات :

Nasrin Behnia ¹ , Parviz Aberoomand Azar ² , Maryam Shekarchi ³ , Mohammad Saber Tehrani ⁴ , Noushin Adib ⁵

1 - Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 - Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 - Food and Drug Laboratory Research Centre, Food and Drug Organization, MOH&ME, Tehran, Iran Pharmaceutical Research Center, Tehran University of Medical Science, Tehran, Iran
4 - Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran
5 - Food and Drug Laboratory Research Centre, Food and Drug Organization, MOH&ME, Tehran, Iran

تاريخ الإرسال : 03 السبت , جمادى الثانية, 1445 تاريخ التأكيد : 03 السبت , جمادى الثانية, 1445 تاريخ الإصدار : 16 الأحد , ربيع الأول, 1445

الکلمات المفتاحية:

ملخص المقالة :

To synthesize the molecular imprinted polymer (MIP), the well-known precipitation polymerization method was used. To do this, Methacrylic acid (MAA; as the functional monomer), ethylene glycol dimethacrylate (EGDMA; as the cross-linker), and 2,2-azobisissobutyronitrile (AIBN; as the initiator), were used. In addition, to control the release rate of Buprenorphine (BUP) from the patch, the bacterial cellulose (BC) was applied. The release process of the drug was investigated by high performance liquid chromatography(HPLC) system, which was showed to be fitted with the Higuchi expression. Moreover, the results have indicated that the obtained MIP-BC is a suitable candidate for the control released transdermal drug delivery. The work revealed that using MIP is more suitable compared to non-imprinted polymer (NIP). In addition, those results indicated that the MIP could be used as a patch for drug delivery application at least in the case of BUP drug.

المصادر:

1. Fishman MA, Scherer A, Topfer J, Kim PS. Limited access to on-label formulations of buprenorphine for chronic pain as compared with conventional opioids. Pain Medicine. 2020 May 1;21(5):1005-9.


2. Ritvo AD, Calcaterra SL, Ritvo JI. Using extended-release buprenorphine injection to discontinue sublingual buprenorphine: a case series. Journal of addiction medicine. 2021 May 1;15(3):252-4.


3. Ritvo AD, Calcaterra SL, Ritvo JI. Using extended release buprenorphine injection to discontinue sublingual buprenorphine: a case series. Journal of addiction medicine. 2021 May 1;15(3):252-4.


4. Eriksson A, Jeppesen S, Krebs L. Induction of labour in nulliparous women-quick or slow: a cohort study comparing slow-release vaginal insert with low-dose misoprostol oral tablets. BMC Pregnancy and Childbirth. 2020 Dec;20:1-8.


5. Behnia N, Azar PA, Shekarchi M, Tehrani MS, Adib N. Synthesis of a new molecular imprinted polymer for oxycodone opioid and its formulation for transdermal controlled drug delivery application: A joint experimental and quantum chemical study. ChemistrySelect. 2022 Oct 13;7(38):e202202553.


6. Lee HY, Kim HE, Jeong SH. One-pot synthesis of silane-modified hyaluronic acid hydrogels for effective antibacterial drug delivery via sol–gel stabilization. Colloids and Surfaces B: Biointerfaces. 2019 Feb 1;174:308-15.


7. Lee HY, Kim HE, Jeong SH. One-pot synthesis of silane-modified hyaluronic acid hydrogels for effective antibacterial drug delivery via sol–gel stabilization. Colloids and Surfaces B: Biointerfaces. 2019 Feb 1;174:308-15.


8. Ganjavi F, Ansari M, Kazemipour M, Zeidabadinejad L. Computer‐aided design and synthesis of a highly selective molecularly imprinted polymer for the extraction and determination of buprenorphine in biological fluids. Journal of Separation Science. 2017 Aug;40(15):3175-82.


9. Gokulakrishnan K, Prakasam T. Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of ephedrine enantiomers. Arabian Journal of Chemistry. 2016 Sep 1;9:S528-36.


10. a) Panahi Y, Motaharian A, Hosseini MR, Mehrpour O. High sensitive and selective nano-molecularly imprinted polymer based electrochemical sensor for midazolam drug detection in pharmaceutical formulation and human urine samples. Sensors and Actuators B: Chemical. 2018 Nov 10;273:1579-86.; b) Siadati A. A theoretical study on the possibility of functionalization of C20 fullerene via its Diels-Alder reaction with 1, 3-butadiene. Letters in Organic Chemistry. 2016 Jan 1;13(1):2-6.


11. Rezaei M, Rajabi HR, Rafiee Z. Selective and rapid extraction of piroxicam from water and plasma samples using magnetic imprinted polymeric nanosorbent: Synthesis, characterization and application. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2020 Feb 5;586:124253.


12. Cieplak M, Kutner W. Artificial biosensors: How can molecular imprinting mimic biorecognition?. Trends in biotechnology. 2016 Nov 1;34(11):922-41.


13. Wang Z, Duan Y, Duan Y. Application of polydopamine in tumor targeted drug delivery system and its drug release behavior. Journal of Controlled Release. 2018 Nov 28;290:56-74.


14. M.A. Tryfonidou, G. de Vries, W.E. Hennink, L.B. Creemers, Adv. Drug Del. Rev., 160, 170 (2020).‏


15. Jun XU, WANG XY, GUO WZ. The cytochrome P450 superfamily: Key players in plant development and defense. Journal of Integrative Agriculture. 2015 Sep 1;14(9):1673-86.


16. Karameta E, Gourgouliani N, Kouvari-Gaglia D, Litsi-Mizan V, Halle S, Meiri S, Sfenthourakis S, Pafilis P. Environment shapes the digestive performance in a Mediterranean lizard. Biological Journal of the Linnean Society. 2017 Aug 1;121(4):883-93.


17. a) Siadati S, Amin M, Meghdad M, Beheshti A. Development and validation of a short runtime method for separation of trace amounts of 4-aminophenol, phenol, 3-nitrosalicylic acid and mesalamine by using HPLC system. Current Chemistry Letters. 2021;10(3):151-60.; b) Beheshti A, Kamalzadeha Z, Haj-Maleka M, Payaba M, Rezvanfar M, Siadati S. Development and validation of a reversed-phase HPLC method for determination of assay content of Teriflunomide by the aid of BOMD simulations. Current Chemistry Letters. 2021;10(3):281-94.


18. A.C. Alves, I.I. Ramos, C. Nunes, L.M. Magalhães, H. Sklenářová, M.A. Segundo, S. Reis, Talanta, 146, 369 (2016).‏


19. Seo JE, Kim S, Kim BH. In vitro skin absorption tests of three types of parabens using a Franz diffusion cell. Journal of exposure science & environmental epidemiology. 2017 May;27(3):320-5.


20. a) Dadras A, Rezvanfar MA, Beheshti A, Naeimi SS, Siadati SA. An urgent industrial scheme both for total synthesis, and for pharmaceutical analytical analysis of umifenovir as an anti-viral API for treatment of COVID-19. Combinatorial Chemistry & High Throughput Screening. 2022 Apr 1;25(5):838-46; b) Siadati SA, Davoudi S, Soheilizad M, Firoozpour L, Payab M, Bagherpour S, Kolivand S. The synthesis and the mechanism of a five-membered ring formation between an isothiocyanate and an amide leading to the yield of Enzalutamide anticancer API; a joint experimental and theoretical study. Journal of Molecular Structure. 2023 May 15;1280:135057.


21. a) Siadati SA, Payab M, Beheshti A. Development of a reversed-phase HPLC method for determination of related impurities of Lenalidomide. Chemical Review and Letters. 2020 Apr 1;3(2):61-4; b) Siadati SA, Soheilizad M, Firoozpour L, Samadi M, Payab M, Bagherpour S, Mousavi SM. An Industrial Approach to Production of Tofacitinib Citrate (TFC) as an Anti-COVID-19 Agent: A Joint Experimental and Theoretical Study. Journal of Chemistry. 2022 Dec 9;2022.


22. Trinovita E, Saputri FC, Mun’im A. Enrichment of the gamma oryzanol level from rice bran by addition of inorganic salts on ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM] PF6) extraction. Journal of Young Pharmacists. 2017;9(4):555.


23. Kellum JA. Disorders of acid-base balance. Critical care medicine. 2007 Nov 1;35(11):2630-6.


24. Han L, Tang C, Yin C. pH-responsive core–shell structured nanoparticles for triple-stage targeted delivery of doxorubicin to tumors. ACS Applied Materials & Interfaces. 2016 Sep 14;8(36):23498-508.