FTRTA : Fault Tolerance and Reliable Transmissions Algorithm based on the Internet of Things
الموضوعات :
Mohsen Mozafari Vanani
1
,
Pouya Khosravian Dehkordi
2
1 - Department of Computer Engineering, Faculty of Engineering, Islamic Azad University, Shahrekord Branch, Shahrekord, Iran.
2 - Department of Computer Engineering, Faculty of Engineering, Islamic Azad University, Shahrekord Branch, Shahrekord, Iran.
الکلمات المفتاحية: Internet of Things, fault tolerance, routing, data exchange, protocol, energy,
ملخص المقالة :
The limitations of IoT have resulted in increased failures and the need for guaranteed fault tolerance to ensure adequate network performance. While previous studies have effectively improved fault tolerance by addressing various aspects of this area, previous methods are ineffective in ensuring the stability and accuracy of data exchange in the event of failure. The existence of this problem highlights the necessity of proposing a new method that can guarantee the stability and accuracy of data exchange to ensure network performance stability in case of failure. To address this, this research introduces a method called FTRTA, which is based on the enhancement of the RPL protocol and data distribution techniques. These distribution techniques are effective in improving load balancing and fault tolerance of network traffic. FTRTA is developed based on this technique and involves three operational steps. Firstly, it evaluates and analyzes the status of network nodes similar to when sending DIO messages. In the second step, it creates a network communication graph. Finally, in the third step, data transmission is performed using a distribution technique to ensure fault tolerance. Simulation results using Cooja software demonstrate the high performance of FTRTA in ensuring the stability and accuracy of data exchange, improving factors such as successful receptions and network throughput compared to similar studies.
[1] H. HaddadPajouh, A. Dehghantanha, R. M. Parizi, M. Aledhari, and H. Karimipour, A survey on internet of things security: Requirements, challenges, and solutions, Internet of Things, Vol. 14, pp. 100129, Jun, 2021.
[2] R. Hassan, F. Qamar, M. K. Hasan, A. H. M. Aman, and A. S. Ahmed, Internet of Things and its applications: A comprehensive survey, Symmetry, Vol. 12, no. 10, pp. 1674, Oct, 2020.
[3] Huang, Haiping, et al. An efficient signature scheme based on mobile edge computing in the NDN-IoT environment, IEEE Transactions on Computational Social Systems, Vol. 8, no. 5, pp. 1108-1120, May, 2021.
[4] M. Al-Emran, S. I. Malik, and M. N. Al-Kabi, A survey of internet of things (IoT) in education: opportunities and challenges, Toward social internet of things (SIoT): Enabling technologies, architectures and applications, pp. 197-209, 2020.
[5] L. Xing, Reliability in Internet of Things: Current status and future perspectives, IEEE Internet of Things Journal, Vol. 7, no. 8, pp. 6704-6721, May, 2020.
[6] K. Gulati, R. S. K. Boddu, D. Kapila, S. L. Bangare, N. Chandnani, and G. Saravanan, A review paper on wireless sensor network techniques in Internet of Things (IoT), Materials Today: Proceedings, 2021.
[7] B. Pourghebleh, V. Hayyolalam, and A. A. Anvigh, Service discovery in the Internet of Things: review of current trends and research challenges, Wireless Networks, Vol. 26, no. 7, pp. 5371-5391, May, 2020.
[8] Y. B. Zikria, M. K. Afzal, F. Ishmanov, S. W. Kim, and H. Yu, A survey on routing protocols supported by the Contiki Internet of things operating system, Future Generation Computer Systems, Vol. 82, pp. 200-219, May, 2018.
[9] A. J. Dey, and H. K. D. Sarma, Routing Techniques in Internet of Things: A Review, Trends in Communication, Cloud, and Big Data, PP. 41-50, 2020.
[10] J. Nassar, M. Berthomé, J. Dubrulle, N. Gouvy, N. Mitton, and B. Quoitin, Multiple instances QoS routing in RPL: Application to smart grids, Sensors, Vol. 18, no. 8, pp. 2472, Jul, 2018.
[11] A. A. Kadhim, and S. A. Rafea, Routing with Energy Threshold for WSN-IoT Based on RPL Protocol, Iraqi J. Comput. Commun. Control Syst. Eng, Vol. 19, no. 1, pp. 71-81, Mar, 2019.
[12] T. L. Jenschke, R. A. Koutsiamanis, G. Z. Papadopoulos, and N. Montavont, Multi-path selection in RPL based on replication and elimination, International Conference on Ad-Hoc Networks and Wireless, pp. 15-26, Sep, 2018.
[13] M. Conti, P. Kaliyar, and C. Lal. A robust multicast communication protocol for Low power and Lossy networks, Journal of Network and Computer Applications, pp. 102675, Aug, 2020.
[14] T. Muhammed, R. Mehmood, A. Albeshri, and A. Alzahrani, HCDSR: A hierarchical clustered fault tolerant routing technique for IoT-based smart societies, Smart Infrastructure and Applications, pp. 609-628, 2020.
[15] P. Sanmartin, A. Rojas, L. Fernandez, K. Avila, D. Jabba, and S. Valle, Sigma routing metric for RPL protocol, Sensors, Vol. 18, no. 4, pp. 1277, Apr, 2018.
[16] M. Lazarevska, R. Farahbakhsh, N. M. Shakya, and N. Crespi, Mobility Supported Energy Efficient Routing Protocol for IoT Based Healthcare Applications, IEEE Conference on Standards for Communications and Networking (CSCN), pp. 1-5, Oct, 2018.
[17] M. Bouaziz, A. Rachedi, A. Belghith, M. Berbineau and S. Al-Ahmadi, EMA-RPL: Energy and mobility aware routing for the Internet of Mobile Things, Future Generation Computer Systems, Vol. 97, pp 247-258, Aug, 2019.
[18] T. Winter, et al. RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks, rfc, Vol. 6550, pp. 1-157, Mar, 2012.
[19] S. Sennan, S. Balasubramaniyam, A. K. Luhach, S. Ramasubbareddy, N. Chilamkurti, and Y. Nam, Energy and Delay Aware Data Aggregation in Routing Protocol for Internet of Things, Sensors, Vol. 19, no. 24, pp. 5486, Dec, 2019.
[20] N. Sousa, J. V. Sobral, J. J. Rodrigues, R. A. Rabêlo and P. Solic, ERAOF: A new RPL protocol objective function for Internet of Things applications, 2nd International Multidisciplinary Conference on Computer and Energy Science (SpliTech), pp. 1-5, Jul, 2017.
[21] B. Vaziri, and A. T. Haghighat, Brad-OF: An Enhanced Energy-Aware Method for Parent Selection and Congestion Avoidance in RPL Protocol, Wireless Personal Communications, pp. 1-30, 2020.
[22] S. Hoghooghi, and R. N. Esfahani, Mobility-Aware Parent Selection for Routing Protocol in Wireless Sensor Networks using RPL, 5th International Conference on Web Research (ICWR), pp. 79-84, Apr, 2019.
[23] K. Jaiswal, and V. Anand, EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications, Wireless Personal Communications, Vol. 111, no. 4, pp. 2493-2515, Apr, 2020.
[24] S. K. Preeth, R. Dhanalakshmi, R. Kumar, and S. Si, Efficient parent selection for RPL using ACO and coverage based dynamic trickle techniques, Journal of Ambient Intelligence and Humanized Computing, Vol. 11, no. 11, pp. 4377-4391, Nov, 2020.
[25] S. Sankar, and P. Srinivasan. Fuzzy logic based energy aware routing protocol for Internet of Things, International Journal of Intelligent Systems and Applications, Vol. 10, no. 10, pp. 11, Oct, 2018.
[26] P. Singh, and Y. C. Chen, RPL Enhancement for a Parent Selection Mechanism and an Efficient Objective Function, IEEE Sensors Journal, Vol. 19, no. 21, pp. 10054-10066, Jul, 2019.
[27] T. D. Nguyen, J. Y. Khan, and D. T. Ngo, A distributed energy-harvesting-aware routing algorithm for heterogeneous IoT networks, IEEE Transactions on Green Communications and Networking, Vol. 2, no. 4, pp. 1115-1127, May, 2018.
[28] "IEEE Draft Standard for Local and Metropolitan Area Networks Part 15.4: Low Rate Wireless Personal Area Networks (LR-WPANs) Amendment to the MAC sub-layer,” IEEE P802.15.4e/D 6.0 (Revision of IEEE Std 802.15.4-2006), pp. 1–200, Aug, 2011.
[29] L. Wallgren, R. Shahid, and V. Thiemo, Routing attacks and countermeasures in the RPL-based internet of things, International Journal of Distributed Sensor Networks, Vol. 9, no. 8, pp. 794326, Aug, 2013.
[30] J. Ko, J. Eriksson, N. Tsiftes, S. Dawson-Haggerty, A. Terzis, A. Dunkels and D. Culler, ContikiRPL and TinyRPL: Happy Together, Proceedings of the workshop on Extending the Internet to Low power and Lossy Networks (IPSN), April 12-14, 2011.
[31] A. Dunkels, J. Eriksson, N. Finne and N. Tsiftes, Powertrace: Network-level power profiling for low-power wireless networks, 2011.
