Sn (II) Ion- Selective Membrane Electrode based on Dibenzo-18-Crown-6
الموضوعات : Journal of Physical & Theoretical ChemistryH. Aghaie 1 , M. Giahi1 Giahi 2 , M. Aghaei 3 , M. Arvand3 4
1 - Not mentioned
2 - Not mentioned
3 - Not mentioned
4 - Not mentioned
الکلمات المفتاحية: Potentiometry, Ion - selective, Tin, Crown ether,
ملخص المقالة :
We found that dibenzo-18-crown-6 (DB18C6) can be used as an ionophore to make a tin (II)-ionselectivemembrane electrode. The electrode exhibits a near Nernstian response for Sn2+ ions over aconcentration range from 1.0× 10-6 1.0× 10-2 M with a slope of 27.5 ± 0.6 mV per concentration decadein an acidic solution (pH=1). The limit of detection was 8.0× 10-7 M. It has a response time of < 20s andcan be used for at least 3 months without any divergence in potentials. The proposed membrane electroderevealed very good selectivity for Sn2+ ions over a wide variety of other cations and could be used inacidic media. It was used as indicator electrode in potentiometric determination of tin (II) ion in realsample.
