Investigating variations of the electron beam voltage on the traveling wave tube output power in the different frequencies
الموضوعات : Journal of Theoretical and Applied Physics
F. Sheykhe
1
(Plasma Physics Research Center, Science and Research Branch, Islamic Azad University)
Sh. Saviz
2
(Plasma Physics Research Center, Science and Research Branch, Islamic Azad University)
M. Salem
3
(Plasma Physics Research Center, Science and Research Branch, Islamic Azad University)
الکلمات المفتاحية: Beam voltage, Output Power, Nonlinear, Traveling wave tube,
ملخص المقالة :
AbstractIn the present research, the effect of variations of the electron beam voltage on the output power is studied. In order to develop the study, this problem was investigated at different frequencies, which are the products of nonlinear behavior of the traveling wave tube (TWT) in response to the input frequency. Moreover, for a more realistic understanding, the tubes were considered with two linear and nonlinear responses to the input frequency. The TWT output power was calculated in linear and nonlinear modes, at different frequencies using the numerical solution of the mathematical equations of the Lagrangian model. Then, the output power in terms of distance and beam voltage in different frequencies was plotted and compared. The results revealed that the effects of variations of voltage on the output power were more proper in a single-mode TWT in comparison with a multimode one.
