Study of deformation microstructure of nickel samples at very short milling times: effects of addition of α-Al2O3 particles
الموضوعات : Journal of Theoretical and Applied Physics
Apurba Kanti Deb
1
(Department of Physics, Raiganj University)
P. Chatterjee
2
(Department of Physics, Vivekananda Mahavidyalaya)
الکلمات المفتاحية: CO, milled Ni powder, x, ray powder diffraction, Rietveld analysis, Twin fault, Microstructural modeling,
ملخص المقالة :
AbstractDeformation microstructure of pure Ni powder milled for short duration was studied. The microstructure, as obtained on the basis of Rietveld analysis and microstructural modeling, shows inhomogeneity and consists of ‘heavily deformed’ with twin faults probability and ‘slightly deformed’ components with varying dislocation densities. The modified Williamson–Hall analysis was performed for both the subcomponents with the relevant scaling parameter. Attempts were made to elucidate the nature of dislocation present in the milled samples. The correction due to extra broadening from stacking fault was calculated from the refined values of twin fault probability. In-depth microstructural modeling with restrictedly random distribution of dislocation and a lognormal distribution of spherical particles were done for the two subcomponents to explore the inhomogeneous microstructure. The effect of α-Al2O3 addition is found in reduction in the Ni particle size and yielding more uniform size distribution. It is shown that X-ray line profile analysis is capable of modeling such inhomogeneous microstructure.
