New Applications of Electroless Nickel-Phosphorus Composite Coatings in Various Industries: A Systematic Review
الموضوعات : Journal of Environmental Friendly Materials
Sh Mahboubizadeh
1
,
F Badretalei
2
,
M Mohammadi
3
,
S Chizari
4
,
O Ashkani
5
1 - Department of Materials Engineering, SR.C., Islamic Azad University, Tehran, Iran
2 - Department of Mechanical Engineering, NT.C., Islamic Azad University, Tehran, Iran
3 - Department of Materials Engineering, SR.C., Islamic Azad University, Tehran, Iran
4 - Department of Mechanical Engineering, NT.C., Islamic Azad University, Tehran, Iran
5 - Department of Materials Engineering, SR.C., Islamic Azad University, Tehran, Iran
الکلمات المفتاحية: Electroless Composite Coatings, NiP, Corrosion Resistance, Composite Coatings, Micro-dot Array,
ملخص المقالة :
Metal coatings used in various industrial surfaces play an important role in the protection of industrial tools and parts, and the development of metal coating processes, together with reinforcing particles such as oxide, non-oxide ceramic particles, and nanostructure particles on the surfaces with different heterogeneous shapes, it has been welcomed by a large part of researchers. Such coatings can be produced by various methods, such as mechanical methods, electrochemical deposition, CVD, PVD, etc. Meanwhile, electroless nickel-phosphorus (ENP) composite coatings are important due to the possibility of coating asymmetric shapes and maintaining the uniformity of the composition, as well as the desired resistance to wear and corrosion. The use of these coatings has increased significantly in recent years, particularly in the manufacture of parts required by the automotive, aerospace, electrical, chemical, and oil and gas industries. In the forthcoming study, their nickel-phosphorus composite coatings have been investigated using the electroless method, and we will examine their mechanical and corrosion properties. It is noteworthy that nickel-phosphorus microdot arrays are also of interest today and could be a suitable field of research
[1] Shashikala AR, Sridhar BS. Code position of electroless Ni-P/ZnO nano composites and evaluation of corrosion resistance of the coatings. Mater Today Proc. 2019; 45:3837-40.
[2] W. A. Formation of a cuprous hydride, by the action of hypo phosphorus acid on a cupric salt solution. 1844; 11:250-2.
[3] Brenner A, Riddell GE. Nickel plating on steel by chemical reduction. Plat Surf Finish. 1998;85(8):54-6.
[4] Wang WC, Vora RH, Kang ET, Neoh KG. Electroless plating of copper on fluorinated polyimide films modified by surface graft copolymerization with 1-vinylimidazole and 4-vinylpyridine. Polym Eng Sci. 2004;44(2):362-75.
[5] Shozib IA, Ahmad A, Abdul-Rani AM, Beheshti M, Aliyu AA. A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corros Rev. 2022;40(1):1-37.
[6] Mencer D. Electroless deposition of amorphous Ni–Re–P alloys from acidic hypophosphite solutions. J Alloys Compd. 2000;306(1–2):158-62.
[7] Sahoo P. Friction performance optimization of electroless Ni–P coatings using the Taguchi method. J Phys D Appl Phys. 2008;41(9):095305.
[8] Ashassi-Sorkhabi H, Rafizadeh SH. Effect of coating time and heat treatment on structures and corrosion characteristics of electroless Ni–P alloy deposits. Surf Coat Technol. 2004;176(3):318-26.
[9] Apachitei I, Tichelaar FD, Duszczyk J, Katgerman L. The effect of heat treatment on the structure and abrasive wear resistance of autocatalytic NiP and NiP-SiC coatings. Surf Coat Technol. 2002;149(2–3):263-78.
[10] Qi K, Xie Y, Wang R, Liu SY, Zhao Z. Electroless plating Ni-P cocatalyst decorated g-C3N4 with enhanced photocatalytic water splitting for H2 generation. Appl Surf Sci. 2019; 466:847-53.
[11] Fayyad EM, Abdullah AM, Hassan MK, Mohamed AM, Jarjoura G, Farhat Z. Recent advances in electroless-plated Ni-P and its composites for erosion and corrosion applications: a review. Emergent Mater. 2018;1(1):3-24.
[12] Wojewoda-Budka J, et al. Microstructure characteristics and phase transformations of the Ni-P and Ni-P-Re electroless deposited coatings after heat treatment. Electrochim Acta. 2016; 209:183-91.
[13] Gould AJ, Boden PJ, Harris SJ. Phosphorus distribution in electroless nickel deposits. Surf Technol. 1981;12(1):93-102.
[14] Duplicate of ref. 11 (same authors, title, journal, year).
[15] Sahoo P, Das SK. Tribology of electroless nickel coatings – a review. Mater Des. 2011;32(4):1760-75.
[16] Mafi IR, Dehghanian C. Studying the effects of the addition of TiN nanoparticles to Ni-P electroless coatings. Appl Surf Sci. 2011;258(5):1876-80.
[17] Dhakal DR, Kshetri YK, Gyawali G, Kim TH, Choi JH, Lee SW. Understanding the effect of Si3N4 nanoparticles on wear resistance behavior of electroless nickel–phosphorus coating. Appl Surf Sci. 2021; 541:148403.
[18] Sudagar J, Lian J, Sha W. Electroless nickel, alloy, composite and nano coatings–a critical review. J Alloys Compd. 2013; 571:183-204.
[19] Keong KG, Sha W. Crystallisation and phase transformation behaviour of electroless nickel-phosphorus deposits and their engineering properties. Surf Eng. 2002;18(5):329-43.
[20] Keong KG, Sha W, Malinov S. Hardness evolution of electroless nickel-phosphorus deposits with thermal processing. Surf Coat Technol. 2003;168(2–3):263-74.
[21] Yan M, Ying HG, Ma TY. Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating. Surf Coat Technol. 2008;202(24):5909-13.
[22] Zhao G, Zou Y, Zhang H, Zou Z. Effect of low-temperature annealing on the properties of Ni-P amorphous alloys deposited via electroless plating. Arch Metall Mater. 2015;60(2A):865-9.
[23] Nava D, et al. Effects of heat treatment on the tribological and corrosion properties of electrodeposited Ni-P alloys. Int J Electrochem Sci. 2013;8(2):2670-81.
[24] Jothi S, Muraliraja R, Tamilarasan TR, Udayakumar S, Selvakumar A. Electroless composite coatings. In: Electroless Nickel Plating. 2019. p. 359-409.
[25] Mallory G. Electroless plating: fundamentals and applications. Int Bus. 1990;3(2):103-11.
[26] Lee CK. Comparative corrosion resistance of electroless Ni-P/nano-TiO2 and Ni-P/nano-CNT composite coatings on 5083 aluminum alloy. Int J Electrochem Sci. 2012;7(12):12941-54.
[27] Alirezaei S, Monirvaghefi SM, Salehi M, Saatchi A. Wear behavior of Ni-P and Ni-P-Al2O3 electroless coatings. Wear. 2007;262(7–8):978-85.
[28] Gao P, Xie Z, Ouyang C, Tao T, Wu X, Huang Q. Electrochemical characteristics and interfacial contact resistance of Ni-P/TiN/PTFE coatings on Ti bipolar plates. J Solid State Electrochem. 2018;22(7):1971-81.
[29] Dhakal DR, et al. Understanding the effect of Si3N4 nanoparticles… Appl Surf Sci. 2021;541:148403. (Duplicate of #17)
[30] Fayyad EM, Abdullah AM, Mohamed AMA, Jarjoura G, Farhat Z, Hassan MK. Effect of electroless bath composition on… NiP–C3N4 coatings. Surf Coat Technol. 2019; 362:239-51.
[31] Jiang Y, Liu Z, Song J, Chang I, Zeng J. Preparation and characterization of bimetallic Pt^Ni-P/CNT catalysts… Green Energy Environ. 2018;3(4):360-7.
[32] Petrova M, Noncheva Z, Dobreva E. Electroless deposition of diamond powder dispersed Ni-P coatings on steel. Trans Inst Met Finish. 2011;89(2):89-94.
[33] Rana ARK, Farhat Z. Preparation and tribological characterization of graphene incorporated electroless Ni-P coatings. Surf Coat Technol. 2019; 369:334-46.
[34] Tamilarasan TR, Sanjith U, Siva Shankar M, Rajagopal G. Effect of reduced graphene oxide on corrosion and erosion-corrosion behavior. Wear. 2017;390–391:385-91.
[35] Muraliraja R, et al. Zwitterionic surfactant response in electroless composite coating… Arab J Sci Eng. 2019;44(2):821-8.
[36] Jin HM, Jiang SH, Zhang LN. Microstructure and corrosion behavior of electroless Ni-P/CeO2 coating. Chin Chem Lett. 2008;19(11):1367-70.
[37] Yang Y, Chen W, Zhou C, Xu H, Gao W. Fabrication and characterization of electroless Ni-P-ZrO2 nano-composite coatings. Appl Nanosci. 2011;1(1):19-26.
[38] Jiaqiang G, Lei L, Yating W, Bin S, Wenbin H. Electroless Ni-P-SiC composite coatings with superfine particles. Surf Coat Technol. 2006;200(20–21):5836-42.
[39] Czagány M, Baumli P. Effect of surfactants… Ni-P-TiC composite coatings. Surf Coat Technol. 2019; 361:42-9.
[40] Dhakal DR, Gyawali G, Kshetri YK, Choi JH, Lee SW. Microstructural and electrochemical corrosion properties of electroless Ni-P-TaC composite coating. Surf Coat Technol. 2020; 381:125135.
[41] Huang ZH, Zhou YJ, Nguyen TT. Nickel matrix composite coatings with TiB2, ZrB2 and TiC particles. Surf Coat Technol. 2019; 364:323-9.
[42] Bozzini B, Martini C, Cavallotti PL, Lanzoni E. Crystallographic and mechanical properties of Ni-P/B4C films. Wear. 1999;225–229:806-13.
[43] Odekerken JM. Process for coating an object with bright nickel/chromium. 1968.
[44] Parker K. Recent advances in electroless nickel deposits. 1973. p. 202-7.
[45] Metzger W, Florian T. Deposition of dispersion hardened coatings. Trans Inst Met Finish. 1976;54(4):174-7.
[46] Zhang YZ, Wu YY, Sun KN, Yao M. Characterization of electroless Ni-P-PTFE composite deposits. J Mater Sci Lett. 1998;17(2):119-22.
[47] Honma H, Ohtake N, Mitsui H. Electroless composite plating. Proc Int Conf Softw Eng. 1980:241-5.
[48] Grosjean A, Rezrazi M, Takadoum J, Berçot P. Hardness, friction and wear of Ni-SiC electroless deposits. Surf Coat Technol. 2001;137(1):92-6.
[49] Apachitei I, Duszczyk J. Autocatalytic nickel coatings on aluminum. Surf Coat Technol. 2000;132(1):89-98.
[50] Xiang Y, Zhang J, etc. Study of electroless Ni-P nano-diamond composite coatings. Available from: nmfrc.org/pdf/psf00/01feb64.pdf
[51] Balaraju JN, Sankara Narayanan TSN, Seshadri SK. Evaluation of corrosion resistance of electroless Ni-P coatings. J Solid State Electrochem. 2001;5(5):334-8.
[52] Chiu WT, Chen CY, Chang TFM, Hashimoto T, Kurosu H, Sone M. Ni-P and TiO2 codeposition on silk textile. Electrochim Acta. 2019; 294:68-75.
[53] Nazari H, Barati Darband G, Arefinia R. A review on electroless Ni-P nanocomposite coatings. J Mater Sci. 2023;58(10):4292-4358.
[54] Ghavidel N, Allahkaram SR, Naderi R, Barzegar M, Bakhshandeh H. Corrosion and wear of electroless Ni-P/SiC on AZ31 Mg alloy. Surf Coat Technol. 2020; 382:125156.
[55] Bozzini B, Martini C, Cavallotti PL, Lanzoni E. Relationships among crystallographic structure… Wear. 1999;225–229:806-13. (Duplicate of #42)
[56] Sun WC, Zhang P, Zhang F, Hou WW, Zhao K. Microstructure and corrosion resistance of Ni-P gradient coatings. Trans Inst Met Finish. 2015;93(4):180-5.
[57] Liu H, Viejo F, Guo RX, Glenday S, Liu Z. Microstructure and corrosion of laser-annealed Ni-W-P coatings. Surf Coat Technol. 2010;204(9–10):1549-55.
[58] Sundaraj M, Subramani V. Influence of N-Dodecyl betaine surfactant on Ni-P-ZnO coatings. Int J Electrochem Sci. 2021; 16:210757.
[59] Balaraju JN, Sankara Narayanan TSN, Seshadri SK. Electroless Ni-P composite coatings. J Appl Electrochem. 2003;33(9):807-16.
[60] Alirezaei S, Monirvaghefi SM, Salehi M, Saatchi A. Wear behavior of Ni-P and Ni-P-Al2O3. Wear. 2007;262(7–8):978-85.
[61] Amjad-Iranagh S, Zarif M. TiO2 nanoparticle effect on Ni-P-TiO2 coatings. J Nanostructures. 2020;10(2):415-23.
[62] Ellis A, Storey J, Wallace S, Ingham B. Magnetic properties of electroless Ni-P coated carbon nanotubes. Carbon-Sci Technol. 2008;1(1):18-23.
