Enhancing CIGS Solar Cell Efficiency through Gold, Silver, and Aluminum Plasmonic Nanostructures
الموضوعات : Journal of Optoelectronical NanostructuresMarzieh Akbari 1 , Fatemeh Dabbagh Kashani 2 , Seyed Mohhammad Mir Kazemi 3
1 - School of Physics, Iran University of Science and Technology, Tehran, Iran
2 - School of Physics, Iran University of Science and Technology, Tehran, Iran
3 - Ceramic group, School of Metallourgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran
الکلمات المفتاحية: Chalcopyrite photovoltaic cells, FDTD simulation method, Noble metal-based plasmonic effects, Optical and Electrical performance analysis,
ملخص المقالة :
Plasmonic nanostructures offer significant benefits for enhancing solar cell performance by improving light absorption, charge carrier generation, exciton separation, and reducing recombination. However, challenges such as current reduction must be addressed through careful material selection and optimization. CIGS-based solar cells, known for their cost-effectiveness and superior efficiency compared to silicon-based cells, are further improved with plasmonic nanostructures. This study investigates the impact of plasmonic effects on CIGS solar cells, showing that the efficiency depends on the Dimensions, Geometry, and arrangement of the nano elements. Simulations of optical and electrical properties, including absorption curves and current-voltage characteristics, reveal that Sample 5 (a solar cell with gold spherical elements at the top of the absorber layer and gold cubic elements at the bottom), which combines two plasmonic nanostructure series, achieves the highest efficiency increase of 25.13%. However, a single plasmonic nanostructure in the active layer offers similar efficiencies with greater cost-effectiveness and simplified manufacturing. These findings highlight the potential of single-series plasmonic nanostructures for advancing solar technology while ensuring practical feasibility in production.
[1]. Machkih, Karima, Rachid Oubaki, and Mohammed Makha. "A Review of CIGS Thin Film Semiconductor Deposition via Sputtering and Thermal Evaporation for Solar Cell Applications." Coatings 14.9 (2024): 1088.
[2]. Ramanujam, Jeyakumar, and Udai P. Singh. "Copper indium gallium selenide based solar cells–a review." Energy & Environmental Science 10.6 (2017): 1306-1319.
[3]. Gohri, Shivani, Jaya Madan, and Rahul Pandey. "Augmenting CIGS solar cell efficiency through multiple grading profile analysis." Journal of Electronic Materials 52.9 (2023): 6335-6349.\
[4]. Royanian, Sahar, Ali Abdolahzadeh Ziabari, and Reza Yousefi. "Efficiency enhancement of ultra-thin CIGS solar cells using bandgap grading and embedding Au plasmonic nanoparticles." Plasmonics 15.4 (2020): 1173-1182.
[5]. Jacak, Janusz E., and Witold A. Jacak. "Plasmonic enhancement of solar cells efficiency: material dependence in semiconductor metallic surface nano-modification." Plasmonics (2018).
[6]. ping, Sun. "Design of plasmonic nanoparticles for increasing efficiency and absorptance in thin-film solar cells." Journal of Optics 53.1 (2024): 404-415.
[7]. Londhe, Priyanka U., Ashwini B. Rohom, and N. B. Chaure. "Improvement in the CIGS solar cell parameters by using plasmonic (Au) nanoparticle." Nanoscience and Nanotechnology 6.1A (2016): 43-46.
[8]. Bednar, Nikola, Noemi Severino, and Nadja Adamovic. "Optical simulation of light management in CIGS thin-film solar cells using finite element method." Applied Sciences 5.4 (2015): 1735-1744.
[9]. Oliveira, António JN, et al. "Development of a Plasmonic Light Management Architecture Integrated within an Interface Passivation Scheme for Ultrathin Solar Cells." Solar RRL (2024): 2400147.
[10]. Waketola, Alemayehu G., Newayemedhin A. Tegegne, and Fekadu G. Hone. "Recent Progress in Silver and Gold Nanoparticle-Based Plasmonic Organic Solar Cells." Plasmonics (2024): 1-36.
[11]. Jeng, Ming-Jer, et al. "Improving efficiency of multicrystalline silicon and CIGS solar cells by incorporating metal nanoparticles." Materials 8.10 (2015): 6761-6771.
[12]. Fjell, Mirjam D., et al. "Enhancing Silicon Solar Cell Performance Using a Thin-Film-like Aluminum Nanoparticle Surface Layer." Nanomaterials 14.4 (2024): 324.
[13]. Hasheminassab, S. M. S., et al. "Influence of the shape and size of Ag nanoparticles on the performance enhancement of CIGS solar cells: the role of surface plasmons." Plasmonics 16.1 (2021): 273-282.
[14]. Mann, Vidhi, and Vipul Rastogi. FDTD simulation studies on improvement of light absorption in organic solar cells by dielectric nanostructures. Optical and Quantum Electronics 52 (2020): 1-16.
[15]. Ryu, Shinyoung, et al. Light intensity dependence of organic solar cell operation and dominance switching between Shockley–Read–Hall and bimolecular recombination losses. Scientific reports 11.1 (2021): 16781
[16]. Ryu, Shinyoung, et al. Light intensity dependence of organic solar cell operation and dominance switching between Shockley–Read–Hall and bimolecular recombination losses. Scientific reports 11.1 (2021): 16781
[17]. Poh, Chung-How, et al. FDTD modeling to enhance the performance of an organic solar cell embedded with gold nanostructures. Optical Materials Express 1.7 (2011): 1326-1331.
[18]. Mulyanti, Budi, et al. Absorption Performance of Doped TiO2-Based Perovskite Solar Cell using FDTD Simulation. Modelling and Simulation in Engineering 2022 (2022).
[19]. Eyderman, Sergey, and Sajeev John. Light-trapping and recycling for extraordinary power conversion in ultra-thin gallium-arsenide solar cells. Scientific reports 6.1 (2016): 28303.
[20]. Rockstuhl, Carsten, Stephan Fahr, and Falk Lederer. Absorption enhancement in solar cells by localized plasmon polaritons. Journal of applied physics 104.12 (2008): 123102.
[21]. Moliton, André, and Jean‐Michel Nunzi. How to model the behaviour of organic photovoltaic cells. Polymer International 55.6 (2006): 583-600.
[22]. Benmir, A., and M. S. Aida. Analytical modeling and simulation of CIGS solar cells. Energy Procedia 36 (2013): 618-627.
[23]. Repins, Ingrid, et al. Required material properties for high-efficiency CIGS modules. Thin Film Solar Technology. Vol. 7409. SPIE, 2009.
[24]. Weiss, Thomas P., et al. Bulk and surface recombination properties in thin film semiconductors with different surface treatments from time-resolved photoluminescence measurements. Scientific reports 9.1 (2019): 1-13.
[25]. J.D. Jackson, Classical Electrodynamics, 3rd Edition, John Wiley & Sons, 1998.
[26]. Sze, S.M., and Ng, K.K., Physics of Semiconductor Devices, 3rd Edition, John Wiley & Sons, 2006.
